Introduction: Safety relay (independent) Input: 2 channel wiring, short circuit detection via contact output: 2 N/O, 1 semiconductor. Manually started UB 24 V DC, width: 22.5 mm, spring-loaded terminal fixed to the front of the device's safety relay for evaluation of the compact height of the sensor with 2 semiconductor outputs.
Product Advantages:
A fast response time of 12 ms maximizes application safety – helping to reduce distance requirements from hazardous movements
Response times are displayed on the front panel - helping you save time when performing annual ESPE inspections
The light barrier is powered directly via the PNOZ c2 evaluation device, making installation fast and safe
Product parameters
Certificates: CE, cULus Certification, EAC (Eurasian), TÜV, CCC
Operating Modes: Auto Reset, Dual Channel, Manual Reset Monitoring
Supply voltage (V): 24,0
Power Type: DC
Terminal type: Fixed
Termination Type: Spring-loaded terminals
Number of instantaneous safety contacts: 2
Number of time-delay safety contacts: 0
Number of semiconductor outputs: 1
Stop Category: 0
Product standard: EN 60947-5-1
Maximum current I at DC13 (6 cycles/min): 1.5 A
Width dimensions: 22.5 mm
Height dimensions: 105.0 mm
Depth dimensions: 100.0 mm
Total weight: 170 g
Net weight: 160 g
Ambient temperature in degrees Celsius: -10 - 55 °C
This article introduces the PILZ safety relay PNOZ c2 spring-loaded terminal 24DCV product, if you are interested in PILZ safety relays, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
|
More on that
|
PILZ/Pilz safety relay PNOZ c1 height dimension 105 mm
Introduction: Safety relay (independent) input: 2 channel wiring, short circuit detection output by contact: 3 N/O, 1 N/C. Automatic/manual return UB 24 V DC, width: 22.5 mm, spring-loaded terminal fixed to the front of the emergency stop monitoring device, highly compact safety gate.
...
|
|
The PILZ safety relay PNOZ X1 is robust and compact with a total weight of 185 g
Introduction: The reliability and robustness of the safety relay PNOZ X have been proven for a long time. They are used in a wide range of applications and are suitable for a wide range of safety applications. Each safety function uses a safety relay PNOZ X. Its technical characteristics are the use of passive and electromechanical ...
|
|
PILZ/PILZ SAFETY RELAY PNOZ 10 AC1 AT 5.0 A
INTRODUCTION: PILZ/PILZ PNOZ 10 SAFETY RELAY (STAND-ALONE) INPUT: 1-/2 CHANNEL WIRING, SHORT CIRCUIT DETECTION WITH/WITHOUT CONTACTS. Output: 6 N/O, 4 N/C. UB 48 V AC, width: 90 mm, integral screw terminals, emergency stop monitoring, safety gate.
...
|
|
PILZ/Pilz safety relay PNOZ s50 C 24V with a total weight of 276 g
Introduction: The safety relays PNOZsigma combine many years of experience with today's state-of-the-art safety technology. Thanks to E-STOP relays, you can achieve maximum safety and cost-effectiveness with minimal effort. The emergency stop relay integrates a variety of functions in the square inch, and realizes multi-function with the smallest width.
|
|
PILZ/PILZ SAFETY RELAY P2HZ X3 DC13 AT 1.5 A
Introduction: Safety relay (stand-alone) input: 1 N/O, 1 N/C Output per pushbutton: 2 N/O, 1 N/C UB 24 V DC, width: 22.5 mm, integral screw terminals, two-hand controls, monitoring of the simultaneity of two-handed buttons.
...
|
|
The PILZ safety relay PNOZ e1p has a height of 90.5 mm
Description: Safety relay (stand-alone) input: 1-/2 channel wiring, with/without short circuit between contacts Detection output: 2 safety outputs + 1 semiconductor-assisted output Auto/monitor start, UB 24 V DC, width: 22.5 mm, screw-in plug-in terminal, emergency stop monitoring, safety gate ...
|
|
The PILZ/Pilz monitoring relay PMD s10 has a height of 98 mm
Introduction: A true power monitor is monitored in a Sigma housing, and in the event of overload and underload, limit values can be set via display and saved to a chip card. Relay outputs: 2 switching contacts. Analog output: current 4-20mA and 0-10V DC, supply voltage: 24-240V AC/...
|
|
Modular safety relay from Pilz PNOZ yh1 2DI
Description: Head module of the modular safety relay myPNOZ, communication with the expansion module, supply voltage of myPNOZ, 1 input function, 2 test pulse outputs for detecting short-circuit contact contacts, 1 rotary switch for selecting functions, 1 for setting the type of start-up and ...
|
|
The PILZ/Pilz safety relay PNOZ e3vp 2-channel wiring
Description: Safety relay (stand-alone) Input: 2 channel wiring, with/without short-to-contact detection (PSEN 2.1p/2.2p) Output: 2 safety outputs + 1 semiconductor-assisted output, delayed automatic/monitored start-up, UB 24 V DC, width: 22.5 mm, threaded plug-in ...
|
|
PILZ/Pilz safety relay PNOZ s3 24VDC width 17.5 mm
Introduction: The safety relays PNOZsigma combine many years of experience with today's state-of-the-art safety technology. Thanks to E-STOP relays, you can achieve maximum safety and cost-effectiveness with minimal effort. The emergency stop relay integrates a variety of functions in the square inch, and realizes multi-function with the smallest width.
|
|
PILZ/Pilz monitoring relay PMD s20 insulation resistance 10-200 kOhm
Introduction: Insulation monitor in a Sigma enclosure to monitor the insulation of galvanically isolated power supplies. Limits can be set via a display and can be saved on a chip card. Relay outputs: 2 switching contacts. Analog output: current 4-20 mA and 0-10 VDC, supply voltage: 24-240 VA...
|
|
PILZ/Pilz safety relay PNOZ e4vp screw-in plug-in terminal
Description: Safety relay (stand-alone) input: 2 channels of wiring with short circuit detection between contacts Output: 2 safety outputs + 1 auxiliary output of semiconductor technology, delayed automatic/monitored start-up, UB 24 V DC, width: 22.5 mm, screw-in plug-in terminal, connection of multiple devices, evaluation ...
|
|
PILZ/Pilz monitoring relay S1SW P depth dimension 121 mm
INTRODUCTION: THE PILZ/PILZ MONITORING RELAY S1SW P STATIC MONITORING IS USED TO MONITOR THE STATIONARY 2 AUXILIARY CONTACTS (C/O) OF DC AND THREE-PHASE MOTORS; Screw plug-in terminal, width: 22.5 mm; UB 24-240 V AC/DC。
...
|
|
Pilz Safety relay PNOZ 2VJ net weight 600g screw terminals
INTRODUCTION: PILZ/PILZ PNOZ 2VJ SAFETY RELAY (STAND-ALONE) INPUT: 1-/2 CHANNEL WIRING, SHORT CIRCUIT DETECTION WITH/WITHOUT CONTACTS. Output: 3 N/O, 1 N/C, 2 N/O time-delay UB-24 V DC, width: 112.5 mm, integral screw terminal, emergency stop monitoring, safety door, power failure contact ...
|
|
PILZ/PILZ SAFETY RELAY P2HZ X1 TWO-HAND CONTROL
Description: Safety relay (independent) input: 1 N/O, 1 N/C per pushbutton Output: 3 N/O, 1 N/C, 2 semiconductors UB 24 V AC, width: 45 mm, integral screw terminals, two-hand control, monitoring of the simultaneity of two-hand buttons.
...
|
|
PILZ/Pilz safety relay PNOZ s2 C Push-in spring-loaded terminals
Introduction: The safety relays PNOZsigma combine many years of experience with today's state-of-the-art safety technology. Thanks to E-STOP relays, you can achieve maximum safety and cost-effectiveness with minimal effort. The emergency stop relay integrates a variety of functions in the square inch, and realizes multi-function with the smallest width.
|
|
PILZ/Pilz safety relay PNOZ s50 C Dual channel 24DCV
Introduction: Safety relay PNOZsigma (stand-alone). Control/monitoring of inductive actuators such as brakes and valves according to PLe and SIL 3, UB 24/48 V DC, max. 3.5/1.75 A continuous current, max. 6.5/3.25 A output current, display of operating push-and-roll, plug-in springs ...
|
|
PILZ/PILZ SAFETY RELAY PST 4 FIXED SCREW TERMINAL 24DCV
Description: PILZ/Pilz PST 4 Safety relay (stand-alone) input: 2 channel wiring with short circuit detection output between contacts: 6 N/O, 4 N/C UB 24 V DC, width: 90 mm, integral screw terminal, safety gate monitor, simultaneous monitoring for approx. 4 s.
...
|
|
Pilz PNOZ yi1 4DI modular safety relay
Product description: Expansion module for the Pilz PNOZ yi1 4DI modular safety relay myPNOZ, 2 input functions, input functions and links, 2 signal outputs, 2 rotary switches for setting the start type and test pulse detection, LED display
input
Digit...
|
|
PILZ/PILZ SAFETY RELAY PNOZ X2C VOLTAGE 24AC/DCV
Introduction: The reliability and robustness of the safety relay PNOZ X have been proven for a long time. They are used in a wide range of applications and are suitable for a wide range of safety applications. Each safety function uses a safety relay PNOZ X. Its technical characteristics are the use of passive and electromechanical ...
|
|
Contact
working hours
