CHINT/CHINT NCH8G Household AC Contactor NCH8G-63/02

NBH-80 miniature circuit breaker is suitable for AC 50Hz, rated voltage 230V, rated current 80A in household and similar places of the line, for overload and short circuit protection, under normal circumstances, as the line of infrequent operation and conversion, can also be used as a disconnected line for line and equipment maintenance...

YBLX-WL travel switch is mainly used in the control circuit of AC 50Hz or 60Hz, voltage 380V, DC voltage 220V, for the travel control of the moving mechanism, the transformation of the direction or speed of the movement, the automatic control of the machine tool, the limit action of the moving mechanism and the control of the stroke or program. Accord with...

HZ10 series combination switch is mainly suitable for AC 50Hz or 60Hz, voltage 380V and below, DC voltage 220V and below the circuit, for manual infrequent connection or breaking of circuits, switching power supply or load, measuring circuits, can also control small capacity motors. Standards: G ...

NB7 series miniature circuit breaker is suitable for overload and short circuit protection in the line of AC 50Hz, rated voltage to 400V, rated current to 63A, can be used as infrequent operation conversion of the line under normal circumstances, and can also be used as an isolation switch for disconnecting the line for line and equipment maintenance.

NKB8-63 series control and protection switching appliances (hereinafter referred to as "switches" or CPS) are mainly used in low-voltage power distribution and motor control and protection circuits with AC 50Hz, rated working voltage of 690V and below, and rated working current of 0.15A-63A. The NKB8-63 switch is an integrated ...

32-bit high-performance CPU, compiled execution mode, scan cycle is 10 times faster than analytical type, and the basic instruction single-step running time is 0.05μs. Weight: 102 Power consumption: 1.5 Power supply: DC24V±20% Digital inputs: 8 This article introduces the CHINT/CHINT NSC1 series motion controller.

NB8-63M single magnetic circuit breaker is mainly suitable for AC 50Hz, rated voltage to 415V, rated current to 63A in commercial office buildings, civil residential and general industrial use of terminal distribution lines, to provide short circuit protection for the line, but also under normal circumstances to the line infrequent conversion operation...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

AX-7 auxiliary contact is mainly used in the line of AC 50Hz, the agreed heating current to 3A, the AC rated voltage to 415V or the DC rated voltage to 125V, and is assembled with the NB7 miniature circuit breaker for the signal indication of the long-distance circuit breaker on/off. Standards: GB/T 14048.5, IEC...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

YBLX-HL travel switch is mainly used in the control circuit of AC 50Hz or 60Hz, voltage 380V, DC voltage 220V, for the travel control of the moving mechanism, the transformation of the direction or speed of the movement, the automatic control of the machine tool, the limit action of the moving mechanism and the control of the stroke or program. Comply with the standard ...

CKJ5 series vacuum AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz, rated working voltage to 1140V, rated working current to 630A circuit, for long-distance connection and breaking of circuits, and can be used with appropriate thermal overload relay or electronic protection ...

DZ20 series plastic shell circuit breaker (hereinafter referred to as circuit breaker), its rated insulation voltage is 660V, AC 50Hz, rated working voltage 380V and below, and its rated current is from 32A to 1250A. Generally used for power distribution, the rated current of type C is 160A and below, and the shell of type 630 and below ...

Introduction: CHINT/CHINT AC contactor NC1-09 (Z) (hereinafter referred to as contactor), mainly used for AC 50Hz (or 60Hz), rated working voltage to 690V, in AC-3, 400 (380) V use category rated working current to 95A in the circuit, for long-distance connection and breaking circuit ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

CKJ5 series vacuum AC contactor (hereinafter referred to as contactor) is mainly used in the circuit of AC 50Hz, rated working voltage to 1140V, rated working current to 630A, for long-distance connection and breaking circuits, and can be related to appropriate thermal overload relays or electronic protectors, etc.

The LA19 series pushbutton is suitable for electromagnetic starters, contactors, relays and other electrical circuits with AC voltage from 50Hz or 60Hz to 380V and DC voltage to 220V for remote control. Conform to the standard: GB/T 14048.5. Rated insulation voltage: 380V Agree on free air ...

The NP6 series push button is suitable for circuit control systems with AC 50Hz or 60Hz, voltage up to 220V, and DC working voltage up to 220V. It is also used in a wide range of fields, including numerical control equipment, instrumentation, and small control equipment, as a main order component or power switch. Indicator type button also ...

ND1 series signal lamps are suitable for indication signals, warning signals, accident signals and other indication signals in telecommunications, electrical and other lines of AC 50Hz (or 60Hz) 380V and below, DC 380V and below. Conform to the standard: GB/T 14048.5. This article introduces CHINT/CHINT ...