CHINT/CHINT Terminal Appliances —NB7 Series Miniature Circuit Breaker

The circuit breaker is rated for insulation voltage up to 800V, suitable for AC 50Hz, rated working voltage up to 400V, rated working current from 10A to 250A in the distribution network circuit, used to distribute power and protect lines and power supply equipment from overload, short circuit, undervoltage and other faults. At the same time ...

NBHLE-63 residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230V/400V, rated current to 63A line, play the role of overload, short circuit and leakage protection, can also be used as infrequent line on/off under normal circumstances. The product conforms to IEC61009-1, GB/T...

OUVT-X1H over-voltage and under-voltage tripper is suitable for AC 50Hz, rated voltage 230V line, and NBH-63, NBH-40 series circuit breaker matching, when the terminal voltage of the tripper is reduced to the undervoltage protection range or increased to the overvoltage protection range, the tripper acts and drives the circuit breaker to automatically ...

YBLX-WL travel switch is mainly used in the control circuit of AC 50Hz or 60Hz, voltage 380V, DC voltage 220V, for the travel control of the moving mechanism, the transformation of the direction or speed of the movement, the automatic control of the machine tool, the limit action of the moving mechanism and the control of the stroke or program. Accord with...

Introduction: The industrial touch screen NTP1 series is based on the Linux system, and the system is stable, efficient and reliable. Industrial-grade high-performance Cortex A8 processor with a clock speed of 600MHz. The COM port integrates RS232/422/485 communication mode. The product provides USB master station and USB slave station, USB slave station ...

Introduction: NXZ series automatic transfer switch electrical appliances are suitable for AC 50Hz, rated voltage 400V/415V and below, rated current to 630A three-phase four-wire dual-circuit power supply grid, automatically connect one or several load circuits from one power supply to another, in order to ensure the normal supply of load circuits.

TC is suitable for connecting wires in circuits with AC 50Hz or 60Hz, rated voltage to 600V, and rated current to 600A. This series of products is connected by screw crimping, and the wire end needs to be crimped before it can be connected to the terminal block. Screw mounting. Standards: ...

CJ20 series AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz (or 60Hz), rated working voltage to 660V, rated working current to 630A, for long-distance switching and breaking circuits, and can be combined with appropriate thermal overload relays.

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

CJ19 series switching capacitor contactor (hereinafter referred to as contactor) is mainly used in power lines with AC 50Hz (or 60Hz) and rated working voltage to 690V, which is used for low-voltage reactive power compensation equipment to put in or remove low-voltage shunt capacitors. Contactors with inhibition ...

XF9J alarm auxiliary contact is suitable for the line with the agreed heating current to 6A, AC rated voltage to 415V or DC rated voltage to 130V, and it is assembled with NB1 miniature circuit breaker or NB1L residual current action circuit breaker for signal indication of long-distance circuit breaker on/off. Compliant with standards ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

32-bit high-performance CPU, compiled execution mode, scan cycle is 10 times faster than analytical type, and the basic instruction single-step running time is 0.05μs. Weight: 102 Power consumption: 1.5 Power supply: DC24V±20% Digital inputs: 8 This article introduces the CHINT/CHINT NSC1 series motion controller.

Rated working voltage (Ue): AC230V 50Hz; Rated insulation voltage (Ui): 500V; Overvoltage Action Setting Value (Uo): 280 (1+5%) V; Tripper action characteristics: When the main circuit voltage is 230 (1+5%)V, the tripper should be able to keep the circuit breaker working for a long time. When the Lord ...

Introduction: NVF3M series mini inverter is a high-performance vector control inverter independently developed by our company, which adopts advanced control strategy to achieve high-precision magnetic flux vector torque control, with high control accuracy, wide speed range, large starting torque, high reliability, overload capacity...

DZ20 series plastic shell circuit breaker (hereinafter referred to as circuit breaker), its rated insulation voltage is 660V, AC 50Hz, rated working voltage 380V and below, and its rated current is from 32A to 1250A. Generally used for power distribution, the rated current of type C is 160A and below, and the shell of type 630 and below ...

AX-6 auxiliary contact is mainly used in AC 50Hz, rated heating current to 6A, rated voltage to 415V or DC rated voltage to 130V line, which is assembled with NB1 series circuit breaker for signal indication of long-distance circuit breaker on/off. Standards: GB/T 14048.5, IEC 6094 ...

DZ20 series plastic shell circuit breaker (hereinafter referred to as circuit breaker), its rated insulation voltage is 660V, AC 50Hz, rated working voltage 380V and below, and its rated current is from 32A to 1250A. Generally used for power distribution, the rated current of type C is 160A and below, and the shell of type 630 and below ...

The TD series is suitable for connecting wires in power and control circuits with AC 50Hz or 60Hz, rated voltage up to 660V, and rated current up to 200A. This series of terminal blocks are connected by screw crimping, and the wire end must be crimped with the TU type or TO type end before it can be connected with the terminal block. Pick up...

NXMFLE residual current action circuit breaker series, suitable for AC 50/60Hz, rated working voltage to 400/415V, rated working current from 10A to 400A in the distribution network circuit, its main function is to provide indirect contact protection for personal electric shock with fatal danger, and to ...