CHINT/CHINT YBLX-HL series travel switch

The circuit breaker is rated for insulation voltage up to 800V, suitable for AC 50Hz/60Hz, rated working voltage up to 690V (415V for 2P products and NM1-63), rated working current from 10A to 250A in the distribution network circuit, used to distribute power and protect line and power supply equipment from overload, short circuit ...

The new NXC series of AC contactors is an innovative and compact design. It is mainly used to start and control AC motors frequently, turn on and break circuits at long distances, and can form electromagnetic starters with appropriate thermal overload relays. ●Conform to the standard: GB/T 14048.1/IEC 6094 ...

NS5 series motor starter is mainly used in AC 50Hz (or 60Hz), working voltage to 690V, working current to 32A circuit, as a three-phase squirrel cage asynchronous motor overload, phase failure, short circuit protection and infrequent starting control for use, can be used as distribution line protection...

The NC5 series AC contactors are primarily used at AC 50Hz (or 60Hz) and are rated for operating voltage up to 690V at AC-3/400(380)V Circuits rated up to 630A in the use category for long-distance switching on and off circuits, and with appropriate thermal overload relays...

Rated insulation voltage (Ui): 500V; Rated operating current at different rated operating voltages (see Table 1) Usage Category: AC-12, DC-12. Action characteristics: At 70%-10% of the rated control power supply voltage, the tripper should act reliably to disconnect the circuit breaker. Tripper ...

The AL-X3H alarm contact conforms to GB/T 14048.5 standard. It is mainly used in lines with AC rated voltage to 415V or DC rated voltage to 130V, and assembled with NBH-125 series circuit breaker for signal indication of long-distance circuit breaker fault breaking. Alarm contact is an accessory product, assembled in ...

Introduction: NJR2-D series soft starter is based on advanced dual CPU control technology as the core, controls the thyristor module, realizes the soft start and soft stop functions of the three-phase AC asynchronous motor, and has the functions of overload, input phase loss, output phase loss, load short circuit, starting current limiting timeout, overvoltage, ...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

The LA19 series pushbutton is suitable for electromagnetic starters, contactors, relays and other electrical circuits with AC voltage from 50Hz or 60Hz to 380V and DC voltage to 220V for remote control. Conform to the standard: GB/T 14048.5. Rated insulation voltage: 380V Agree on free air ...

NB8-63M single magnetic circuit breaker is mainly suitable for AC 50Hz, rated voltage to 415V, rated current to 63A in commercial office buildings, civil residential and general industrial use of terminal distribution lines, to provide short circuit protection for the line, but also under normal circumstances to the line infrequent conversion operation...

Shell Frame Class (A): 1600, 2000, 3200, 4000, 6300A ● Two kinds of breaking capacity: N, H ● Rated voltage Ue (VAC): 380/400/415, 440/525/690V ● Number of poles: 3 or 4 poles (In=6300A only has 3 poles) ● Installation: drawer type or fixed type ...

NB1L residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230V, rated current to 25A line, when the person is electrocuted or the power grid leakage current exceeds the specified value, the residual current action circuit breaker can quickly cut off the fault power supply in a very short time, protect people and electrical equipment...

DZ20 series plastic shell circuit breaker (hereinafter referred to as circuit breaker), its rated insulation voltage is 660V, AC 50Hz, rated working voltage 380V and below, and its rated current is from 32A to 1250A. Generally used for power distribution, the rated current of type C is 160A and below, and the shell of type 630 and below ...

The NP4 series pushbutton is suitable for circuit control systems with AC 50Hz or 60Hz, voltage up to 380V, and DC working voltage up to 220V. It is used for the control of electromagnetic starters, contactors, relays and other electrical circuits. The indicator button is also suitable for light signal indication. ...

Introduction: CHINT/CHINT contactor NC11 is mainly used in the meter box to control the power supply system of the meter: under normal circumstances, the main contact of the contactor is kept on (that is, the main contact is normally closed at four poles, and one of the poles is used for the protection of the user's neutral line short circuit), only when the user owes ...

NBH8LE-40 □ residual current action circuit breaker (hereinafter referred to as circuit breaker) is suitable for AC 50Hz, rated voltage 230V, rated current to 40A in the line, when the person is electrocuted or the leakage current of the power grid exceeds the specified value, the circuit breaker can quickly cut off the fault power supply in a very short time, ...

DZ20 series plastic shell circuit breaker (hereinafter referred to as circuit breaker), its rated insulation voltage is 800V, AC 50Hz, rated working voltage 400V and below, and its rated current is from 32A to 225A. It is generally used for power distribution, and can also be used as a protective motor. Under normal circumstances, the circuit breaker ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

NM2 series plastic shell circuit breaker (hereinafter referred to as circuit breaker) has a rated insulation voltage of 1000V, which is suitable for AC 50Hz, rated working voltage of 400V, rated current of 100A-800A in the low-voltage distribution network, which can be used to distribute electric energy and protect lines and power supply equipment from overload, ...

Molded case circuit breaker, in the distribution line and equipment overload, short circuit, to provide protection for the line and equipment, but also to the infrequent start of the motor to provide overload, short circuit protection. ● Shell Frame Grade NXMS Series Electronic Circuit Breaker: 160A, 250A, 400A, 630A, 100...