Honeywell Industrial Pressure Sensors MLH Series

Uni-Curve thermistors with bare wires and epoxy coatings. -60°C to 150°C [-76°F to 302°F] The 192 series thermistors are high-quality, cost-effective, resistive and temperature-matched, interchangeable devices. The product does not need to resist the temperature of the circuit components one by one.

100 Ω or 1000 Ω platinum resistance temperature sensor (RTD). -70°C to 260°C. Ceramic housing with leads The HRTS series thin-film platinum resistance temperature detectors (RTDs) are designed to measure temperatures in the range of -70 °C to 260 °C [-94 °F to 500 °F].

Compensatory. Low voltage. Differential pressure, gauge pressure. mV output. Liquid media. Accuracy: ±0.25 % FSS BFSL Pressure range ± 60 mbar to ±10 bar, ±6 kPa to ±1 MPa, ±1 psi to ±150 psi The Honeywell TruStability® TSC Series is ...

Introduction: Honeywell Humidicon Digital Humidity/Temperature Sensor: HIH6000 Series, I2C, ±4.5% RH accuracy, SIP 4-pin, no filter, 100 sensors on tape and reel. Products...

HONYWELL DPT5000U1-A Sensor DPT Series Air Differential Pressure Sensor Measuring range: 0-5000 Output signal: 4-20mA Sensor: DPT series air pressure differential sensor All-stainless steel capacitive sensing element • Good temperature stability and long-term stability ...

City Technology's Series 4 gas sensor sets the industry standard for portable gas detectors. These include sensors for the detection of oxygen and toxic gases, as well as certified catalytic combustion sensors for the detection of combustible gases. 4 ...

Honeywell Sensors JM1202ED3C2 Cylindrical Sensors JSM8 Series Inductive Proximity Sensors: Rectangles: JPA17 series, JPA25 series, JPA30 series, JPA40 series Cylindrical: JSM8 series, JM12 series, JM18 series, JM30 series ...

Introduction: The AWM2000 Series Microbridge Air Mass Flow Sensor is a passive unit consisting of two Wheatstone bridges. According to the operating specifications, a heater control circuit is also required. According to the operating specifications, a power supply circuit for the sensor bridge is also required. These two circuits are not on the package board, so ...

Introduction: The AWM700 series microbridge mass flow sensors enable coaxial flow measurement with a specially designed bypass flow housing. The sensor can measure flow rates up to 200 standard liters per minute (SLPM) while typically generating a pressure drop of 1 in H2O. The AWM700 features ...

Introduction: The AWM5000 Series Microbridge Mass Flow Sensors feature a venturi flow housing. This series measures airflow of up to 20 standard liters per minute (SLPM) while generating a maximum pressure drop of 2.25" H2O. The microbridge chip is in direct contact with the airflow, which greatly ...

Summary: The HSC series is capable of performing comprehensive calibration and temperature compensation for sensor zero, sensitivity, temperature coefficient, and nonlinearity using an application-specific integrated circuit (ASIC) on the board. Calibrated analog output values and digital outputs are updated at a rate of approx. 1 kHz and 2 kHz, respectively ...

RTD & Thermistor Sensing Elements and Temperature Probe Kits; Commercial, precision and high-reliability thermistors/thermal switches. RTD (Resistance Temperature Detector) Sensing Element: Platinum-based RTDs are laser-trimmed for accuracy and flexibility. These temperature sensors are used to provide stable and fast ...

Hall-effect blade position sensor. Twin tower line outlet package. Current sink output The AV vane-operated monolithic magnet position sensor works by causing the ferromagnetic blade to pass through the gap between the Hall sensor and the magnet, thereby shunting the magnetic flux away from the sensor. AV Series ...

Summary: The NBP series is ideal for users who want to self-compensate, calibrate, and amplify themselves so that they can utilize a bare sensor for maximum resolution output and tailor the algorithm to the requirements of the specific application. In addition, the NBP series is available in a variety of package forms and mounting options ...

Introduction: Honeywell's PX3 series heavy-duty pressure sensors feature piezoresistive sensing technology based on ASIC (application-specific integrated circuit) signal conditioning and are equipped with a brass housing and Metri-Pack 150 or wiring harness electrical connection. The PX3 series is fully calibrated and operates at -40°C to 125° ...

City Technology's Series 5 advanced gas sensors are designed to ensure peak performance in harsh environments for flue gas analyzers and combustion efficiency monitors. City Technologies' Series 5 Advanced Gas Sensors are designed to ensure that flue gas analyzers and ...

Calibrated and compensated. Compact size. High accuracy: down to ±1.5% FSS TEB. Low voltage. Absolute, or gauge. Digital output. Lead-free SMT Pressure range 60 mbar to 2.5 bar | 6 kPa to 250 kPa | 1 psi to 30 psi description MPR Series ...

High accuracy, compensated/amplified, ±6 mbar to ±12 bar. ± 600 Pa to ±1.2 Mpa and ±2 inH2O to ±175 psi. Digital output, compatible with liquid media The BP2 series is a piezoresistive silicon pressure sensor that can be used in a specified full-scale pressure range and temperature range.

This model includes a pressure sensor and digital readout combination and is designed for industrial and laboratory applications. Accu-Gage offers portability, high accuracy, industrial-grade durability, and a competitive price. Accu-Gage units are also suitable for panel mounting and can be used in process lines ...

Introduction: The HAF series compensates for a temperature range of 0 °C to 50 °C [32 °F to 122 °F] and can operate in a temperature range of -20 °C to 70 °C [-4 °F to 158 °F]. Advanced ASIC-based compensation enables digital (I...