Sick Sensors - Analysis of common fault codes for fiber optic sensors

Quality assurance through programmable imaging: RIBE Technik from Schwabach has developed an innovative bumper assembly system that includes an inspection system. Machine vision from SICK enables the identification of individual components and the monitoring of each operating process as a special system concept ...

1. Measurement Sensors and sensor systems from SICK measure dimensions, oversights, volumes, distances, speeds, and filling levels and then ensure that the process runs smoothly. 2. Detection SICK sensors are able to detect the presence or absence of various objects as well as the quality of consumer products to the satisfaction of ...

With the practical application and demand of security protection, the existing 2D protection equipment has gradually been unable to meet the customer's requirements for safety, and the demand for 3D safety equipment is getting higher and higher. Today we are launching a new product from SICK---safeVisionary2.

1. Be sure to check whether the power supply used is in line with DC12-24V±10%, and the maximum is not more than 40V, otherwise the photoelectric switch may be damaged. 2. In order to ensure high stability detection, it is necessary to ensure that two points are achieved: first, the detection distance meets the specified rated detection distance, such as the detection distance is 12±2mm ...

1) The target to be measured: the infrared system is set according to its infrared radiation characteristics; 2) Atmospheric attenuation: When the infrared radiation of the object to be measured passes through the atmosphere, it will be affected by a variety of substances and the attenuation phenomenon occurs; 3) Optical receiver: used to receive part of the infrared radiation and ...

Are you still having a headache about detecting the presence or absence of objects? Are you still bothered by checking the liquid level? Are you still troubled by the limited installation of application scenarios? Today, SICK is back with the secret weapon of substance detection: capacitive proximity sensors. 　　This capacitive sensing ...

1. Thermistor sensor temperature measurement Thermistor sensors used to measure temperature are generally simple in structure and inexpensive. Thermistors without an outer protective layer can only be used in dry places; Hermetically sealed thermistors are not afraid of moisture erosion and can be used in harsh rings.

The detection procedure of the sensor 1. Symptom Judgment: Infer the location where the malfunction may occur. 2. Decoder detection: Confirm whether the suspected sensor has a fault code in the decoder, and strengthen the judgment in the data stream. 3. Inspection around the sensor: In case of ...

As a special sensor for the two-dimensional code positioning and navigation market, GLS621 is mainly used in warehousing AGVs or warehouse handling robots based on the principle of inertial two-dimensional code navigation.

Method 1: Put the color sensor on the white object, turn on the red filter, at this time the sensor will emit the frequency, count the emitted frequency, when the count reaches 255, there is a time, this time is recorded as T1. Turn on the green filter, at this point the sensor will ...

1. The color sensor, also known as the color sensor, is a machine that compares the color of the object with the reference color that has been taught earlier to detect the color. The standard color measurement method is to use a spectrophotometric colorimeter to measure the tristimulus value of the sample, so as to obtain the color of the sample.

How the color mark sensor works The color mark sensor is actually a reverse installation, the light source is perpendicular to the target object device, and the bearer is biased towards the device at an acute angle to the object, so that it only detects the scattered light from the target object, and then prevents the sensor from directly bearing the reflected light, and can make ...

1. Photodiode Photodiodes are generally in reverse operation in circuits Dark current, photocurrent (the stronger the light, the photocurrent?) ） 2. Phototransistor There is no lead-out at the base, and the collector is positive with respect to the emitter When the light shines on ...

1. There are many types of displacement sensors, and the measurement accuracy, service life, response frequency and applicable occasions of sensor products designed with different principles will be slightly different. Appropriate displacement sensor products should be selected according to the on-site installation and measurement requirements. 2. The measurement range of the displacement sensor is one ...

It is a physical phenomenon in which light irradiates certain substances and changes the conductive properties of the substance, which can be divided into three categories: external photoelectric effect, internal photoelectric effect and photogenerated volt effect. The external photoelectric effect refers to the physical emission of electrons from the surface of an object under the action of light.

With the development of Industry 4.0, the intelligent level of the production line of high-speed smart home enterprises has been continuously improved, and the processes of cutting, edge banding, drilling, sorting, spraying, and packaging have been integrated to achieve a real "unmanned factory". 　　Intelligent and flexible production equipment allows robots to ...

Infrared sensors: Sensors that take advantage of the physical properties of infrared rays to make measurements. Infrared light is also known as infrared light. The infrared sensor does not have direct contact with the measured object during measurement, and the anti-interference performance is poor, so the lens needs to filter the infrared light before measurement, and it needs to be calibrated regularly. ...

1. Photoelectric switch sensor The occlusion between the transmitter and receiver is used to detect states such as motion, object presence, or object position. When the measured object passes through the occlusion beam, the intensity of the light signal received by the receiving head changes, which in turn triggers the switching signal. Photoelectric switch ...

Overview Identification codes are easy and secure IDM's mobile handheld barcode scanner reliably recognizes 1D and 2D codes, including stacked codes such as PDF417. Depending on the field of application and environmental conditions, a standardized or rugged IP65 degree of protection can be provided.

In the packaging, electronics and other industries, there has always been a need for stable detection of specific colors to meet the needs of positioning, counting, etc. This is where a color sensor is often used. If the installation space is small, a color sensor of the miniature size type is required. This is why the miniature color sensor from SICK – CS ...