Rorobot FM-A6V3/LS1[HAS]

Introduction: Rorobot Finger Module C4V4, Features and Applicable Scenarios: Large Clamping Force, Can Be Used in Series (Using Screw Accessory Kit PK) and Simplifies Tracheal Arrangement. It is mostly used in the scene where multiple fingers work at the same time and the workpiece is compact, and the width of the workpiece is generally greater than 50mm. Features: ...

Introduction: Rorobot B-3C12[H]/S Features: The fingertips are opened in the positive pressure state and clamped in the vacuum state, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by supporting the fingertip distance D. Soft-touch materials are divided into regular type [H] and non-marking type ...

Introduction: Rorobot soft jaw BMC-3A18 [HAS]/S, soft jaw material is divided into conventional type [H] and non-marking type [HAS] Features: The fingertips are open in the positive pressure state, and clamped in the negative pressure state, it is recommended to use it with a soft-touch air driver, and the fingertip distance of the clamping fingertip G and the external support fingertip distance is D...

Introduction: Soft Touch/Rorobot Finger F-B6 Features: The finger material can be selected as regular type, reinforced type [H] and anti-static type [AS]. The reinforced grade [H] has a higher operating pressure range and a gripping force of up to 300% of the fingers of conventional grades. Defend...

Introduction: Rorobot B-4H18[H]/S Features: The fingertips are open in the positive pressure state, clamped in the negative pressure state, and it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by using the external support fingertip distance D. The soft claw material is divided into conventional type [H] and non-marking type [ ...

Introduction: Soft Touch/Rorobot Independent Finger Module SMP-01 Features: According to the length of the slot, it is divided into SMP-01 / SMP-02 / SMP-03 It can be used for the assembly between the finger module [FM] and the aluminum profile The mounting angle and position of the finger module [FM] can be adjusted freely ...

Introduction: The soft beak series products perfectly solve the grasping problem of the robot in the face of miniature and irregular products. The soft bionic beak allows for easy gripping of studs, rings, or capacitors that are difficult to grasp by suction cups and metal pneumatic grippers without damaging the surface. Small, soft ...

Introduction: Soft Touch/Rorobot Finger F-A7 Features: Finger pattern and fingertip shape: It will affect the coating effect and friction of the workpiece. If you need to customize the shape of the finger or fingertip, please contact customer service. Finger material can be selected conventional ...

Introduction:Rorobot Soft Jaw BMC-1G364030[H]/M, is a strengthened version of the single finger soft jaw, the recommended distance between the fingertip and the workpiece is (19-28) mm, the recommended load of the single finger soft jaw is (0-500)G, and the external gripping force is (0-11)N. Features: Positive pressure state fingertip hit ...

Introduction: Soft Touch/Rorobot Finger F-A4 Features: Finger pattern and fingertip shape: It will affect the coating effect and friction of the workpiece. If you need to customize the shape of the finger or fingertip, please contact customer service. Finger material can be selected conventional ...

Introduction: Rorobot B-20606/S Features: The fingertips are opened in the positive pressure state and clamped in the vacuum state, and it is recommended to use it with a soft-touch air driver, and the fingertip distance G is supported to use the working air pressure adjustment. Soft-touch materials are divided into conventional type [H] and non-marking type, ...

Introduction: Soft Touch/Rorobot Finger Module FMA5-V3 Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted. Features: Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing ...

Introduction: Soft-Touch/Rorobot Skid Shift Mounting Plate SMP-2L Features: It is divided into different styles according to the shape and length of the groove It can be used for assembly between the finger module [FM] and the flange connection module [FCM]. The mounting angle and position of the finger module [FM] can be adjusted freely ...

Introduction: Soft-Touch/Rorobot Soft-Touch Module Slip Mounting Plate SMP-13 Features: According to the length of the slot, it is divided into SMP-13 / SMP-14 / SMP-15 / SMP-16 It can be used for the assembly between the soft beak module, the connection combination [CM] and the aluminum profile The installation angle of the soft beak module and the ...

Introduction: The multi-finger opposite hand claw has a large grasping strength, can be grasped in both directions by standing and lying down, has strong adaptability, and can perfectly solve the problems of shaking and positioning deviation when grabbing hanging parts. The soft material and adjustable grip force eliminate scratches and damages on the surface of the product. Aluminium profile frame, ...

Introduction: Rorobot Finger Module FM-A5V2, Features and Applicable Scenarios: Independent Installation, Can Be Installed with SMP Sliding Mounting Plate, Finger Spacing and Angle Adjustable, Fixation: Can Be Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional) . ...

Introduction: Rorobot Finger Module B4V5, Features and Applicable Scenarios: The module is thinner and lighter, and the minimum finger spacing of the mounting module is only 10mm, which is suitable for clamping tiny, thin and light workpieces. It can also be used in series (using the screw kit PK), but compared to the V4, each finger needs to be supplied with air independently.

Introduction: Rorobot BMC-3B12[H]/S Product parameters Tare weight: 3.3g Maximum load: 10g External gripping force: 0.1N Maximum working frequency: 300 times/min Accuracy range: 0.05mm Safe working pressure: 24 ...

Introduction: Rorobot Robot BML-1G071010[LP]/S Features: The fingertip is open in the positive pressure state, and the vacuum state is clamped, and it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted for the distance G between the fingertip and the workpiece. The soft claw material is divided into ...

Introduction:Soft Touch/Rorobot Finger Module FM-B3V1 Features and Applicable Scenarios: Combination of two-finger modules, compact structure, small footprint. The spacing and installation angle are not adjustable, which is suitable for clamping tiny, thin and light workpieces. Features: Features and applicable scenarios: two-finger ...