Soft Touch/Rorobot Finger F-A7 Finger Width 24mm

Introduction: Rorobot B-4B30[H]/S Features: The fingertip is open in the positive pressure state, clamped in the vacuum state, it is recommended to use it with a soft-touch air driver, and the working air pressure can be adjusted by supporting the fingertip distance G and the external support finger distance D. Soft-touch materials are divided into ...

Introduction: Rorobot Soft Beak B-20005V Product features: Replaceable flexible chucks The fingertip is open in the positive pressure state, clamped in the negative pressure state, and the fingertip distance is adjustable G It can be used as a clamp or external support Recommended for use with soft touch drivers Products...

Introduction: Rorobot BMC-20501[H]/S Product features: The fingertips are open in the positive pressure state, clamped in the vacuum state, it is recommended to use with the soft touch air driver, and the working air pressure can be adjusted with the fingertip distance D. Soft touch materials are divided into conventional [H] and non-...

Introduction: Rorobot Finger Module C5V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle are adjustable. Product features: Features and applicable scenarios: independent installation, can be installed with SMP slip mounting plate, finger spacing and ...

Introduction: Rorobot Flexible Jaw BML-3B14/S Product features: The fingertips are open in the positive pressure state, clamped in the negative pressure state, it is recommended to use them with the soft touch air driver, and the inner support fingertip distance D can be adjusted using the working air pressure. The soft claw material is divided into conventional type and traceless type, when ...

Introduction: Rorobot FM-A5V5/LS1 Product features: Specifications Positive pressure stroke: 24.5mm Negative pressure stroke: 19mm Safe working air pressure: 120kPa Recommended load: 280g Dead weight: 90g We are a guest ...

Introduction: Rorobot BML-1G071010/S Product features: The fingertips are open in the positive pressure state, clamped in the vacuum state, it is recommended to use them with the soft touch air driver, and the working air pressure can be adjusted using the clamping fingertip distance G. The soft claw material is divided into conventional type and traceless type.

Introduction: Rorobot BMC-3B14/S 　　Product features: The fingertips are open in the positive pressure state, clamped in the negative pressure state, it is recommended to use them with the soft touch air driver, and the inner support fingertip distance D can be adjusted using the working air pressure. The soft claw material is divided into conventional type and traceless type, when ...

Introduction: Rorobot Robot Robot Gripper BML-1G071010[LPAS]/S Product features: The fingertip is open in the positive pressure state, clamped in the vacuum state, it is recommended to use it with the soft touch air driver, and the working air pressure can be adjusted using the distance between the fingertip and the workpiece G. The material of the soft claw is ...

Introduction: Soft Touch/Rorobot Finger F-B8 Product features: Finger materials can be selected as regular type, enhanced type [H], and anti-static type [AS]. The reinforced material [H] has a higher working pressure range, and the clamping force** is up to 300% higher than that of conventional material fingers. Defend...

Introduction: Soft Touch/Rorobot Flange Connection Module FCM-R04 Product features: It complies with the ISO9409-1:2004 standard (i.e., the national standard GB/T 14468.1-2006/), and is suitable for most robot flanges on the market. Lightweight for lightweight multi-joint machines

Introduction: Rorobot B-20006 Product features: Replaceable flexible chucks The fingertip is open in the positive pressure state, clamped in the negative pressure state, and the fingertip distance is adjustable G It can be used as a clamp or external support Recommended for use with soft touch drivers Products...

Introduction: Soft Touch/Rorobot Skid Steer Mounting Plate SMP-2S Product features: It is divided into different styles according to the shape and length of the groove It can be used for assembly between finger modules [FM] and flange connection modules [FCM] The mounting angle and position of the finger module [FM] can be freely adjusted ...

Introduction: Soft Touch/Rorobot Finger Module FMA8-V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted. Product features: Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing ...

Introduction: Soft Touch/Rorobot Spring Rod Flange Connection Module FCM-S01 Product features: It complies with the ISO9409.1:2004 standard (i.e., the national standard GB/T 14468-2006/), and is suitable for most robot flanges on the market For mounting soft beak modules or lightweight hand claws ...

Introduction: Rorobot BMC-3B12[H]/S Features: The fingertips are opened in the positive pressure state and clamped in the vacuum state, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by supporting the fingertip distance D. Soft-touch materials are divided into conventional type [H] and non-marking ...

Introduction: Soft Touch/Rorobot Finger Module B3V5, Features and Applicable Scenarios: The module is thinner and lighter, and the installation module finger spacing is only 10mm, which is suitable for clamping small and thin workpieces. It can also be used in series (using screw fitting package PK), but compared to the V4, each finger needs to be supplied with air independently.

Introduction: Soft Touch/Rorobot Finger Module A4V5, Features and Applicable Scenarios: The module is thinner and lighter, and the finger spacing of the mounting module is only 10mm, which is suitable for clamping small and thin workpieces. It can also be used in series (using screw fitting package PK), but compared to the V4, each finger needs to be supplied with air independently.

Introduction: Soft Touch/Rorobot Skid Steer Mounting Plate SMP-5L Product features: It is divided into different styles according to the shape and length of the groove It can be used for assembly between finger modules [FM] and flange connection modules [FCM] The mounting angle and position of the finger module [FM] can be freely adjusted ...

Introduction: Soft Touch/Rorobot Finger Module B5V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle are adjustable. Product features: Features and applicable scenarios: independent installation, can be installed with SMP slip mounting plate, finger spacing and ...