Soft Touch/Rorobot Slip Mounting Plate SMP-2L thickness 8mm

Create Date: 2024-8-30 12:03:23|Source: Soft Touch/Rorobot

Previous
Next
Brand:
Soft Touch/Rorobot

Origin:
Suzhou

Price:
Please contact customer service

Delivery time:
Please contact customer service

Model:
Skid Mounting Plate SMP-2L

Product Introduction
The mounting angle and position of the SMP-2L Finger Module [FM] can be freely adjusted

quality assurance

Attentive service

Secure transactions

Product Description

Introduction: Soft-Touch/Rorobot Skid Shift Mounting Plate SMP-2L

Soft Touch/Rorobot Slip Mounting Plate SMP-2L thickness 8mm

Features:

It is divided into different styles according to the shape and length of the groove

It can be used for assembly between the finger module [FM] and the flange connection module [FCM].

The mounting angle and position of the finger module [FM] can be adjusted freely

Product parameters

Groove length: 45mm

Slot spacing: 10mm

Groove width: 4.2mm

Thickness: 8mm

Tare weight: 25.4g

Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to meet or even exceed customer expectations, so that customers are satisfied and recognize us. Honest, professional, affordable, fast, so let you rest assured." Integrity and professional service, affordable price, and continuous improvement" is our service concept.

This article introduces the soft-touch/Rorobot skid-steer mounting plate SMP-2L products, if you are interested in the soft-touch/Rorobot skidding mounting plate, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.

More on that

	柔触/Rorobot 手指模块FM-B3V2 模块宽度25mm 简介：柔触/Rorobot 手指模块FM-B3V2，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调，固定方式:可从四个方向固定(可选)，进气方式:可从三个方向安装进气接头(可选) 　 ...
	柔触/Rorobot 手指模块A8V4 模块长度148mm 简介：柔触/Rorobot 手指模块A8V4，特点及适用场景:夹持力**大，可串联(使用螺丝配件包PK)使用并简化气管布置。多用于多条手指同时工作且工件间紧凑的场景，工件宽度-般大于50mm。　　产品特 ...
	柔触/Rorobot手指模块FM 手指尺寸L41×W24mm 简介：手指模块FM是柔触夹爪的动作执行模块，由手指F及固定模块两部分组合而成，依据进气方式，安装位置，组合方式，选择合适的手指固定模块。依据被夹取工件的重量及尺寸，所需夹持力的大小， ...
	柔触/Rorobot 手指模块FE-A3V1 模块宽度29mm 简介：柔触/Rorobot 手指模块FE-A3V1，特点及适用场景:双指模块组合方式，结构紧凑，占用空间小。指间距及安装角度不可调节，适用于夹取微小、轻薄的工件。　　产品特点　　特点及适用场景: ...
	柔触/Rorobot 柔爪BML-20006[P] 建议负载30g Introduction: Rorobot Soft Jaw BML-20006 Features: The fingertips are open in the positive pressure state, and the vacuum state is clamped, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G The soft claw material is divided into conventional type and non-marking type.
	柔触/Rorobot 柔爪BMC-2076D5[P1/S 安全工作气压80kPa 简介：柔触/Rorobot 柔爪BMC-2076D5[P1/S 　　产品特点　　正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，夹持指尖距G可使用工作气压调节。　　柔爪材质分为常规型和无痕 ...
	柔触/Rorobot 手指F-B6 指尖行程53mm 简介：柔触/Rorobot 手指F-B6 　　产品特点　　手指材质可选择常规型，增强型[H]以及防静电型[AS]。　　增强型材质[H]拥有更高的工作压力范围,夹持力**高达到常规材质手指的300%。　　防 ...
	柔触/Rorobot 柔爪BML-2076D5[PAS]/S 简介：柔触/Rorobot 柔爪BML-2076D5/S 　　产品特点　　正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，夹持指尖距G可使用工作气压调节。　　柔爪材质分为常规型和无痕型， ...
	柔触/Rorobot 无源驱动器PCU-SMN 额定功率36W 简介：柔触/Rorobot 无源驱动器PCU-SMN 　　产品特点　　应用于对抓取功能要求全面，柔性化,智能化程度高的智能工厂等场景　　压缩空气驱动，具备抓取与张开的双向功能　　工作节拍快， ...
	柔触/Rorobot 手指模块FM-C8V2 正压行程42mm 简介：柔触/Rorobot 手指模块FM-C8V2，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调，固定方式:可从四个方向固定(可选)，进气方式:可从三个方向安装进气接头(可选) 　 ...
	柔触/Rorobot 手指模块FM-B8V1 手指高度21mm 简介：柔触/Rorobot 手指模块FM-B8V1，特点及适用场景:双指模块组合方式,结构紧凑,占用空间小.指间距及安装角度不可调节,适用于夹取微小、轻薄的工件. 　　产品特点　　特点及适用场景:双指 ...
	FlexTouch/Rorobot Flange Connection Module FCM-R08 简介：柔触/Rorobot 法兰连接模块FCM-R08 　　产品特点　　符合ISO9409-1：2004（即标GB/T 14468．1·2006/）适配于市面上大部分机器人，法兰。　　建议大负载20kg 　　适合非标夹爪组合 ...
	Rorobot BML-20006[PAS] Introduction: Rorobot Soft Jaw BML-20006 Features: The fingertips are open in the positive pressure state, and the vacuum state is clamped, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G The soft claw material is divided into conventional type and non-marking type.
	柔触/Rorobot 滑移安装板SMP-2S 槽宽4.2mm 简介：柔触/Rorobot 滑移安装板SMP-2S 　　产品特点　　按形状和槽长度分为不同款式　　可用于手指模块[FM]与法兰连接模块[FCM]间的装配　　手指模块[FM]的安装角度和位置可自由调节　 ...
	柔触/Rorobot 柔爪BMC-20501[H]/S 建议负载5g 简介：柔触/Rorobot 柔爪BMC-20501[H]/S 　　产品特点　　正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，支持指尖距D可使用工作气压调节。　　柔触材质分为常规型[H]和无 ...
	柔触/Rorobot 柔爪BMC-3G20[HAS]/S 简介：柔触/Rorobot 柔爪BMC-3G20[HAS]/S 　　产品特点　　正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，支持指尖距G可使用工作气压调节。　　柔触材质分为常规型[H]和无 ...
	柔触/Rorobot 紧凑型有源驱动器ACU2-B 15812075mm 简介：柔触/Rorobot 紧凑型有源驱动器ACU2-B让驱动更简单，插电即用，小巧方便，清醒桌面机械臂**佳的cp 　　产品参数　　额定功率：18W 　　工作电压：24V 　　输出气压：-85—100kPa 　 ...
	柔触/Rorobot 柔爪FM-C4V5/LS1[HAS] 简介：柔触/Rorobot 柔爪FM-C4V5/LS1[HAS] 　　产品参数　　正压行程：24.5mm 　　负压行程：16mm 　　安全工作气压：300kPa 　　建议负载：380g 　　自重：90g 　　我们以客户为中心的 ...
	柔触/Rorobot 柔爪BMC-4BG64[P]/S 开合频率6次/秒简介：柔触/Rorobot 柔爪BMC-4BG64/S，B-4BG64/S 是一款外抓式柔爪，推荐夹持工件尺寸(28-50)mm,开合尺寸在（50.4-80）mm，适合抓取蒸蛋糕、包子、烧麦以及枣糕等这类柔软的食品，B-4BG64/S 是 ...
	柔触/Rorobot 手指F-A3 指尖行程16.5mm 简介：柔触/Rorobot 手指F-A3 　　产品特点　　指底花纹及指尖形状:会影响对工件的包覆效果以及摩擦力。　　如需定制仿形指底花纹或指尖形状，请联系客服人员。　　手指材质可选择常规型 ...