CHINT/CHINT CJ19 Series Switching Capacitor Contactor

NKZ1-20 series universal transfer switch can be used in AC 50Hz or 60Hz, voltage 415V and below, DC voltage 220V and below circuits for conversion of electrical control circuits and electrical measuring instruments, such as: electromagnetic coils, electrical measuring instruments, capacitor cabinets, etc., can also be used for direct control ...

NBHLE-63Y residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230V, rated current to 63A line, play the role of overload, short circuit and leakage protection, can also be used as infrequent line on/off under normal circumstances. The product conforms to IEC61009-1, GB/T 1691 ...

The main function of the AX-X1 auxiliary contact: it can be assembled with the circuit breaker to realize the signal indication of the on/off of the long-distance circuit breaker. Conform to the standard: GB/T14048.5, IEC60947-5-1 Parameters and performance Action characteristics: The wiring principle of the auxiliary contact is shown in Figure 1. When the auxiliary contact is opened, the 17th and 12th terminals ...

NCH8G series household AC contactors (hereinafter referred to as contactors) are mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance loads; It can also be used to control the home ...

DZ20 series plastic shell circuit breaker (hereinafter referred to as circuit breaker), its rated insulation voltage is 660V, AC 50Hz, rated working voltage 380V and below, and its rated current is from 32A to 1250A. Generally used for power distribution, the rated current of type C is 160A and below, and the shell of type 630 and below ...

The disconnector series is mainly used to make and break circuits and isolate power supplies infrequently in the power distribution network. ● Shell Frame Grade: 63A, 125A, 160A, 250A, 400A, 630A, 800A, 1000 ● Rated working voltage Ue(AC):400V/415V,690V(63,125 ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

Introduction: CHINT/CHINT AC contactor NC1-09 (Z) (hereinafter referred to as contactor), mainly used for AC 50Hz (or 60Hz), rated working voltage to 690V, in AC-3, 400 (380) V use category rated working current to 95A in the circuit, for long-distance connection and breaking circuit ...

CJ20 series AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz (or 60Hz), rated working voltage to 660V, rated working current to 630A, for long-distance switching and breaking circuits, and can be combined with appropriate thermal overload relays.

UVT-X1H undervoltage tripper is suitable for AC 50Hz, rated voltage 230V in the line, and NBH-63, NBH-40 series circuit breaker matching, when the tripper terminal voltage is reduced to the undervoltage protection range, the tripper action and drive the circuit breaker to automatically break, so as to achieve the undercurrent of the line...

NBHLE-40Y residual current action circuit breaker is suitable for AC 50Hz, rated voltage 240V, rated current to 40A in the line, play the role of overload, short circuit and leakage protection, can also be used as the line under normal conditions for infrequent on/off use. The product conforms to IEC61009-1, GB/T 1691 ...

NB7 series miniature circuit breaker is suitable for overload and short circuit protection in the line of AC 50Hz, rated voltage to 400V, rated current to 63A, can be used as infrequent operation conversion of the line under normal circumstances, and can also be used as an isolation switch for disconnecting the line for line and equipment maintenance.

CHINT Xinrui NA5 series universal circuit breaker has a rated working current from 200A to 6300A, a rated limit short-circuit breaking capacity of up to 120kA, a rated working voltage of up to AC690V, and an ambient temperature of -45°C - +70°C. The product set high breaking, zero arcing, a variety of ...

CKJ5 series vacuum AC contactor (hereinafter referred to as contactor) is mainly used in the circuit of AC 50Hz, rated working voltage to 1140V, rated working current to 630A, for long-distance connection and breaking circuits, and can be related to appropriate thermal overload relays or electronic protectors, etc.

Introduction: NSC1 series motion controller has 2 communication ports, 1 RS232, 1 RS485; Two or four single-phase high-speed pulse counting, up to 200KHz respectively, one or two AB phase high-speed pulse counting, up to 200KHz; External real-time clock chip is used to make the clock more accurate; ...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

The new NXC series AC contactor has a novel appearance and compact structure. It is mainly used to start and control AC motors frequently, turn on and break circuits at long distances, and can form electromagnetic starters with appropriate thermal overload relays. Standards: GB/T 14048.1/IEC 60947-1, ...

NB1LE-63□ residual current action circuit breaker is suitable for AC 50Hz, rated voltage unipolar two-wire, two-pole 230V, three-pole, three-pole four-wire, four-pole 400V, rated current up to 63A. When a person is electrocuted or the leakage current of the power grid exceeds the specified value, the residual current action circuit breaker can ...

ND1 series signal lamps are suitable for indication signals, warning signals, accident signals and other indication signals in telecommunications, electrical and other lines of AC 50Hz (or 60Hz) 380V and below, DC 380V and below. Conform to the standard: GB/T 14048.5. This article introduces CHINT/CHINT ...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.