Siemens APT Relays - Installation Precautions for High and Low Voltage Relays

Create Date: 2024-8-30 12:03:23|Source: APT/Siemens Shanghai Ergong

1. Choose the right relay: When choosing a high and low voltage relay, you should choose the right product according to your needs, such as selecting according to the rated voltage, current and other information

2. Installation location: The high and low voltage relay should be installed in a dry, ventilated, non-corrosive gas, and dusty area, and the ventilation performance of the relay should be ensured during installation, so as not to affect its working temperature and life. At the same time, it should also be avoided to install the relay in the area of mechanical vibration, so as not to affect the contact state and life of its contacts.

3. Connecting line: When connecting the high and low voltage relay lines, attention should be paid to the correct and standardized wiring, and the positive and negative electrodes of the high and low voltage relays should be connected with the power supply and the controller. When connecting the line, attention should also be paid to the overload protection of the line and the isolation of strong and weak current lines to avoid the danger of electric shock.

4. Temperature: High and low voltage relays will generate a lot of heat when working, in order to avoid excessive heating, it is necessary to carry out appropriate heat dissipation measures or install fans for cooling.

5. Maintenance: Regularly inspect and maintain the relay, such as checking the contact status of the relay, refueling and other problems, and solve the problems in time if they are found.

Siemens APT Relays - Installation Precautions for High and Low Voltage Relays

More on that

	Introduction to the characteristics of Siemens APT relays - solid state relays Solid state relay is a non-contact electronic switch with isolation function, no mechanical contact parts in the switching process, so in addition to having the same function as electromagnetic relay, solid state relay also has logic circuit compatibility, vibration resistance and mechanical impact resistance, unlimited installation position, and good anti-...
	Siemens APT - AD16 series indicator frequently asked questions 1. Why does the indicator light still glow after the control power supply has been disconnected? This situation is caused by the presence of interference voltage, and this problem can be solved by ordering our anti-interference indicator light 2. What are the operating hours of the AD16 series indicators? More than 30000 small ...
	Siemens APT current transformer – the basis for whether the current transformer is damaged or the measurement is inaccurate 1. The inspection basis for whether the current transformer is damaged: 1. The basis for checking whether the polarity is damaged: The primary winding of the current transformer is marked P1 and P2, and the secondary winding is marked as S1 and S2. If P1 and S1 are the same name, then this sign is called reduced polarity. Primary current from P1 ...
	Introduction to the features of the full range of Siemens APT metal button FM products Seeking advanced, perfect and excellent Xijia APT to concentrate on research and development, and constantly change customs, the launch of the metal flat button indicator FM series is to complete the perfect integration of appearance and performance. Ultra-thin flat round device, metal shell and buttons, high-value appearance Product ...
	TL series police lights frequently asked questions 1. How many light sources are there for the TL-70 police light? There are 3 types, namely LED, incandescent and xenon. 2. What are the colors of the TL-70 police light? There are 5 types, which are red, yellow, green, blue, and white. 3. What are the types of TL-70 police lights? 3 ...
	Siemens APT - ALS series limit switch FAQ 1. What are the installation methods of ALS limit switches? Usually the limit switch is divided into front of the board installation or board back installation, all of which are installed by screws. 2. What are the different modes of limit switch action? According to the action mode of the limit switch head, it is divided into ...
	Siemens APT Relays – The working principle of zero-crossing AC solid state relays 1. Working process: AC zero-crossing solid state relays have the characteristic of turning on when the voltage crosses zero and turns off when the load current crosses zero. Circuit diagrams, dimensions and drawings of zero-crossing AC solid state relays When the optocoupler OPT is turned off (i.e. there is no input signal at the control end of the OPT ...
	Siemens APT Relays - Selection Method for Solid State Relays 1. When selecting the solid-state relay used in the printed circuit board with small current specifications, because the lead terminal is made of high thermal conductivity material, the soldering should be carried out under the condition that the temperature is less than 250 °C and the time is less than 10S.
	Siemens APT Relays – What are the forms of protection relays? Rail protection relays A protective relay that works mainly as a result of accidents that occur in transmission lines. When this method works, the circuit breakers at both ends of the faulty line will be disconnected. Busbar protection relays A protective relay, mainly due to the power plant or transformer...
	Siemens APT Relays – Components of Solid State Relays Solid state relays consist of three parts: the input circuit, the isolation (coupling), and the output circuit. Input circuitry According to the different categories of input voltage, the input circuit can be divided into three types: DC input circuit, AC input circuit and AC and DC input circuit. Some input control circuits are also ...
	Siemens APT Relays - Common Problems and Solutions of Relays First, the contact is loose and cracks The contact is the electrical contact part of the relay to complete the switching load, and the contact of some products is riveted and pressed, and its main drawbacks are loose contacts, cracked contacts or excessive dimensional position deviation. This will affect the contact reliability of the relay. Shovel appears ...
	Siemens APT Relays – Principles and characteristics of photorelays When the input quantity (such as voltage, current, temperature, etc.) reaches the specified value, the controlled output circuit is turned on or off an electrical appliance. It can be divided into two categories: electrical (such as current, voltage, frequency, power, etc.) relays and non-electrical (such as temperature, pressure, speed, etc.) relays. With action ...
	Siemens APT Relays – The difference between signal relays and power relays Signal relays are used more in secondary maintenance circuit circuits. It tells the right people exactly what is wrong with the maintenance. The power relay is a bit like a discriminant sentence in mathematics. When a constant is entered, the satisfactory and unsatisfactory conditions will output different results. Merit...
	Siemens APT current transformer - working principle and characteristics of current transformer How a current transformer works The principle of current transformer is based on the principle of electromagnetic induction. A current transformer is composed of a closed core and windings. It has a small number of turns on the primary side winding, stringed in the line where the current needs to be measured, so it often has the full current of the line ...
	Siemens APT Current Transformers – How to view current transformers 1. Standardize current transformer: the top of the transformer verification is used as a standardizer, and the accuracy is usually more than two grades higher than that of the tested. 2. Load box: imitate the practice operation status of the tested transformer. 3. Transformer ...
	Siemens APT current transformer – a common form of current transformer ratio 1. Multi-tap current transformer. The primary winding remains unchanged, and when winding the secondary winding, several taps are added to obtain a plurality of different transformation ratios. For example, two taps are added to the secondary winding, K1 and K4 are 800/1A, K1 and K3 are 600/1A, and K1 and K2 are 400/1A, that is, the transformation ratio is 400-600-800/1A...
	Siemens APT relay - the use of solid state relay pay attention to five major matters 1. The resistive load should not exceed 60% of the rated current; 2. Overcurrent and load short circuit may cause permanent failure of the internal thyristor in SSR, so it is necessary to install a fuse or air switch, and a fuse can be used if the capacity is small; 3、 ...
	Siemens apt - TL series police lights frequently asked questions 1. How many light sources are there for the TL-70 police light? There are 3 types, namely LED, incandescent and xenon. 2. What are the colors of the TL-70 police light? There are 5 types, which are red, yellow, green, blue, and white. 3. What are the types of TL-70 police lights? 3 ...
	Siemens APT relay - common faults and solutions for high-voltage relays 1. Poor contact Poor contact is one of the most common faults in high-voltage relays, which can lead to problems such as hot terminals ® and burned contacts. Workarounds include regularly checking terminals and set screws for loose and cleaning contact surfaces. 2. Excessive wear At...
	Siemens APT Relays - What are the classifications of high and low voltage relays? 1) Electromagnetic relay: an electrical relay that works by using the suction force generated by the circuit in the input circuit between the electromagnet core and the armature. 2) Solid relay: refers to a kind of relay in which electronic components perform their functions without mechanical motion components, and the input and output are isolated. ...