CHINT/CHINT CJ20 Series AC Contactor CJ20-10

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

Product Overview NXCQ series contactor emergency start device is a product specially designed and developed for fire water supply system, with the function of manual mechanical emergency start fire pump, in line with GB/T50974-2014 "Technical Specification for Fire Water Supply and Fire Hydrant System" for manual mechanical emergency starting.

● CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching on and off circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

CJ20 series AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz (or 60Hz), rated working voltage to 660V, rated working current to 630A, for long-distance switching and breaking circuits, and can be combined with appropriate thermal overload relays.

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

NHH-125 disconnector is suitable for AC 50Hz, rated voltage 230V/400V, rated current to 125A in the power distribution and control circuit, mainly as the main switch in the terminal combination appliances, can also be used to control all kinds of low-power electrical appliances and lighting, can be widely used in commercial and home and other places. ...

DZ20 series plastic shell circuit breaker (hereinafter referred to as circuit breaker), its rated insulation voltage is 800V, AC 50Hz, rated working voltage 400V and below, and its rated current is from 32A to 225A. It is generally used for power distribution, and can also be used as a protective motor. Under normal circumstances, the circuit breaker ...

CHINT/CHINT Terminal Appliances —NXU-III. Surge Protective Device Basic parameters and technical performance indicators (Table 1) Design types and protection mode combinations for different models of surge protective devices (see Table 2) SPECIAL FEATURES The surge protective device has a deterioration indication, as shown in sequence 3 in the figure ...

JF5 series base enclosed terminal block is suitable for the frequency of 50Hz or 60Hz, the rated voltage to 660V, the rated cross-sectional area of 1.5-25mm2 round copper wire for connection. This series of products is connected by screw crimping, and the wire end needs to be crimped before it can be connected to the terminal block. ...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

NM8N series plastic case circuit breaker is suitable for AC 50/60Hz, rated voltage AC690V and below, and DC system rated voltage of DC1000V and below, rated current of 16A to 1600A circuit for switching, breaking and carrying rated current, and can be used in the line and electrical equipment...

CJ20 series AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz (or 60Hz), rated working voltage to 660V, rated working current to 630A, for long-distance switching and breaking circuits, and can be combined with appropriate thermal overload relays.

LAY39 series button is suitable for AC 50Hz or 60Hz, rated working voltage 380V and below or DC working voltage 220V in industrial control circuits, as electromagnetic starters, contactors, relays and other electrical circuit control, with indicator light button is also suitable for light signal ...

Introduction: NVF3M series mini inverter is a high-performance vector control inverter independently developed by our company, which adopts advanced control strategy to achieve high-precision magnetic flux vector torque control, with high control accuracy, wide speed range, large starting torque, high reliability, overload capacity...

HZ5 series combination switch is mainly used for AC 50Hz or 60Hz, voltage 380V and below electrical circuits as power switch and cage induction motor starting, commutation, variable speed switch, can also be used for control line switching. Comply with standards: GB/T 14048.3, IEC 60947-3. ...

The NXHB-125 disconnector complies with IEC60898 and GB10963 standards. It is suitable for AC 50Hz or 60Hz, rated voltage 250V and below residential single-phase lines, to protect the overload and short circuit of electrical lines. The product has high breaking capacity, small size and a width of only 18mm. Zero, fire ...

The TD series is suitable for connecting wires in power and control circuits with AC 50Hz or 60Hz, rated voltage up to 660V, and rated current up to 200A. This series of terminal blocks are connected by screw crimping, and the wire end must be crimped with the TU type or TO type end before it can be connected with the terminal block. Pick up...

NB1L residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230V, rated current to 40A line, when the person is electrocuted or the leakage current of the power grid exceeds the specified value, the residual current action circuit breaker can quickly cut off the fault power supply in a very short time, protect people and electrical equipment...

CKJ5 series vacuum AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz, rated working voltage to 1140V, rated working current to 630A circuit, for long-distance connection and breaking of circuits, and can be used with appropriate thermal overload relay or electronic protection ...

The XF9 auxiliary contact is suitable for the line with the agreed heating current to 6A, the AC rated voltage to 415V or the DC rated voltage to 130V, and it is assembled with NB1 or NBH8 miniature circuit breaker for the signal indication of the long-distance circuit breaker. Standards: GB/T 14048.5, IEC 6094 ...