Honeywell S87B1016 modules

honeywell SR-1C-AD48V-S Slim Intermediate Relay with spring-terminal receptacle Features: Thin, with a width of only 6mm 6A of contact switching capability The socket comes with overvoltage protection Control coil supports AC & DC universal ( Relay set ) ...

Digital manometer. High pressure grade ranging from 15,000 psi to 60,000 psi. Accuracy: 0.2% FS. 15-5 PH stainless steel wetted material The JH series digital manometer with autoclave fitting with 0.2% full-scale accuracy with sensor technology is made up of 15-5 PH ...

Ultra-compact. MIPI interface is available. Excellent motion tolerances. White light illumination. Choice of LED or laser aiming. Enhance flexibility Take a closer look at the ultra-compact N660X Series scan engine, a patented imaging sensor designed to read professional barcodes. This ...

Honeywell Contactor HCS-50-A48 AC Contactor Coil Voltage: 48V, One Normally Open, One Normally Closed HCS-09-95&AC-3/AC-4 has the same rated current and can be used without descaling &Snap-on dust cover, easy to remove, but not easy to fall off, good dust-proof effect, prevent man-made ...

Honeywell CN Series non-spring-return damper actuators CN Series Non-Spring Return Damper Actuator Features and Benefits Electrical parameters Electrical connection: The allowable cable specification of the terminal block is 0.344 - 2.0mm2 (22 - 14AWG) Power supply voltage: AC230V-15%/+20%, 50/...

The CT60 XP is designed for on-the-go frontline workers and managers in scan-intensive workflows that require mobile data capture and processing. The CT60 XP is part of the CT60 product family, the most touch-only rugged mobile device in the Honeywell portfolio.

All-in-one solution. Enhanced barcode reading performance. Support USB/RS232/TTL multiple interfaces. IP54. SR and ER optics The Honeywell HF561 Series 2D Imager Module is a powerful 2D barcode scanner that delivers exceptional scanning performance for easy ...

High-resolution magnetostrictive displacement. SOIC-8 package. The dual analog voltage output responds to changes in the angle of the magnetic field Honeywell's APS00B high-resolution angular position sensor IC (integrated circuit) is a miniature surface-mount electronic component designed to saturate the ...

The omnipolar sensor IC detects a permanent magnet or electromagnetic magnetic field and responds to either pole (north and south). Omnipolar magnetoresistive sensor. U-Pack, SOT-89B package. The maximum operating value is 25 G This article introduces the Honeywell/Honeywell omnipolar position sensor IC 2SS52 ...

Overload protection is achieved by monitoring the current of each phase, and under-phase and out-of-phase protection are achieved by differential push plate device It has the function of -5°C-40°C ambient temperature compensation The current rating of the protection covers the range of 0.1 A to 95 A It has two types of safety ...

Honeywell Contactor HCS-12-10-A380 AC Contactor Coil voltage: 380V, normally open HCS-09-95&AC-3/AC-4 has the same rated current and can be used without descaling &Snap-on dust cover, easy to remove, but not easy to fall off, good dust-proof effect, prevent man-made ...

Two-wire MR toroidal magnetic macro sensor IC. Flat TO-92 style package. Enhanced sensitivity, typically ±7 G. Digital source current output The VF401 is a high-performance digital two-wire MR (magnetoresistive) sensor in a small, low-profile TO-92 plastic package ...

Digital force indicator, 4 1/2" digital display. Accuracy: ±0.7% FS. Range: 5 lb to 50,000 lb. Only the pressure is measured. Stainless steel diaphragm design The Model LC Digital Force Indicator is a highly portable force measurement device. It is powered by a 9 V battery and has a compact size.

Honeywell Valve CN7510A2001 Damper Actuator Non-Spring Return Electrical parameters Electrical connection: The allowable cable specification of the terminal block is 0.344 - 2.0mm2 (22 - 14AWG) Power supply voltage: AC230V-15%/+20%, 50/60Hz AC/DC24V--15 ...

EA30 2D scan engine The EA30 high-performance 2D imager is ideal for scanning barcodes on the move. Thanks to its ability to read codes at speeds of up to 12.7 m/s (500 ips), the EA30 reads barcodes with ease, even under dynamic conditions. The EA30 imager is also extremely rugged. Symbol...

HRN series of high-load general-purpose intermediate relays Features: Small size, high sensitivity It can be equipped with an LED indicator device for a reliable indication of the contact status RoHS compliant, CE certified Comes with a variety of sockets to choose from This article introduces the Honeywell/Honeywell ...

Introduction: SZR-MY General Purpose Relays: Standard Relays; Plug-in/solder terminals; DPDT; 110/120 Vac。 The SZR MY and LY series universal power relays are suitable for a wide range of applications, including power and logic control of plant equipment and control panels. ...

Honeywell HD660-T-05 universal inverter Three-phase AC380V Power 55KW Current 110A This article introduces Honeywell HD660-T-05 products, if you are interested in Honeywell products, please also contact our customer service ...

Dolphin™: The CT60 is rugged and ideal for businesses that need anytime, anywhere connectivity and fast data capture for maximum uptime and productivity. The Dolphin CT60 is built on the Mobility Edge™: platform with a common software and hardware-based ...

Digital manometer. General Purpose, 1 psi to 10000 psi. Accuracy: 0.2% FS. Stainless steel wetted material The JK series of digital pressure testers use sensor technology to have 0.2% full-scale accuracy and are available in two finishing materials, one of which is Ha C276/316 stainless steel wetted material.