IDEC/Izumi HE1G-L Handheld Enabling Switch HE1G-L20MB

Create Date: 2024-8-30 12:03:23|Source: IDEC/Izumi

Product Description
3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance.
IDEC/Izumi HE1G-L Handheld Enabling Switch HE1G-L20MB
Press OFF (position 3) ⇒ release OFF (position 1) to create an ON structure. (IEC60204-1:2005, item 10.9, IEC60947-5-8:2007, item 7.1.9), built-in 2-contact 3-position switch realizes a safer dual structure.

The auxiliary switch has a direct disconnect function.

By pressing the pressure sense, the action of switching from position 1 to position 2 and position 2 to position 3 is clearly confirmed.

By reducing the load on hand handling, the burden on the user during long-term use is reduced.

The wiring method can be selected as a screw terminal table type or an internal connector type.

There are also types with an emergency stop switch and a type with an instantaneous pushbutton switch.

Achieve IP66 waterproof rating. (HE1G-L21SM only) corresponds to the ANSI robotics standard.

Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.

This article introduces IDEC/Hequan HE1G-L Handheld Enabling Switch HE1G-L20MB product, if you are interested in IDEC/Hequan, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.

More on that
IDEC/Izumi Safety Interlock HS5E-K Micro Lock Safety switch with key lock HS5E-KVA003-2C502 IDEC/Izumi Safety Interlock HS5E-K Micro Lock Safety switch with key lock HS5E-KVA003-2C502

Introduction: VA circuit, unplug the key at the LOCK position, key 502, 3m cable Product Category Safety Interlocks Key Removal Position Removed in the locked position Degree of protection IP65 Cable length 3 meters Our customer-centric service concept: a full range of services are pursued ...

IDEC/Izumi HE3B enabling switch HE9Z-D3B IDEC/Izumi HE3B enabling switch HE9Z-D3B

Ergonomic, 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance. Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation. Reduction of operating force in position 2 ...

IDEC/Izumi Safety Interlock HS5L Micro Lock HS9Z-DH5RH Door Handle Actuator (Right) IDEC/Izumi Safety Interlock HS5L Micro Lock HS9Z-DH5RH Door Handle Actuator (Right)

IDEC/Izumi Safety Interlock HS5L Micro Lock HS9Z-DH5RH Door Handle Actuator (Right) Doorknob Actuator Handle Unit, Right Side Door Product Category: Door Handle Actuators The company has always been customer-centric, the concept of creating value for customers, and winning the market with quality and service.

IDEC/Izumi HS1E-K Type Solenoid Safety Switch 3 Circuit Type HS1E-K844MSR-R-T001 IDEC/Izumi HS1E-K Type Solenoid Safety Switch 3 Circuit Type HS1E-K844MSR-R-T001

All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...

IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-DQ44KMSRP-G IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-DQ44KMSRP-G

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

IDEC/Izumi HS5D Safety Switch HS9Z-A51 IDEC/Izumi HS5D Safety Switch HS9Z-A51

It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off. It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...

IDEC/Izumi HS5E-KVD003-2A502 Safety switch with key lock IDEC/Izumi HS5E-KVD003-2A502 Safety switch with key lock

VD circuit, key detachable in all positions, key 502,3m cable Mechanical Specifications: Product Category Safety Interlocks Key removal location for all positions Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length 3 meters Our customer-centric approach ...

IDEC/Izumi Safety Interlock HS5L-XH44M-G Interlock 2 CNT Spring Lock IDEC/Izumi Safety Interlock HS5L-XH44M-G Interlock 2 CNT Spring Lock

2 contacts, 2NC lock monitoring circuit, spring lock Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: EN ISO14119 GS-ET-19

IDEC/Izumi HS5E-KVD003-2A Safety switch with key lock IDEC/Izumi HS5E-KVD003-2A Safety switch with key lock

VD circuit, key removable in all positions, 3m cable Mechanical Specifications: Product Category Safety Interlocks Key removal location for all positions Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length 3 meters Our customer-centric service concept: all-round ...

IDEC/Hequan Safety Interlock HS5L-XG7Y4M-G Interlock 2 CNT Solenoid Lock IDEC/Hequan Safety Interlock HS5L-XG7Y4M-G Interlock 2 CNT Solenoid Lock

2 contacts, 1NC 1NO access control monitoring circuit, electromagnetic lock Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: EN ISO14119 GS-ET-19( ...

IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-R7Y4KMSRP-G IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-R7Y4KMSRP-G

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

IDEC/Izumi HS5D Safety Switch HS5D-11ZRNM IDEC/Izumi HS5D Safety Switch HS5D-11ZRNM

It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off. It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...

IDEC/Izumi HE1G-L Handheld Enabling Switch HE1G-L21SM-1N IDEC/Izumi HE1G-L Handheld Enabling Switch HE1G-L21SM-1N

3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance. Press OFF (position 3) ⇒ release OFF (position 1) to create an ON structure. (IEC60204-1:2005, 10.9, IEC60947-5-8:2007, 7.1.9), built-in 2 ...

IDEC/Izumi HE1G-L Hand-held Enabling Switch IDEC/Izumi HE1G-L Hand-held Enabling Switch

With a clear feeling of pressure, the 3-position action can be reliably distinguished. By reducing the load on hand handling, the burden on the user during long-term use is reduced. Key features: 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance. Press OFF (position 3)⇒ Release OFF...

IDEC/Izumi HS5B Safety Switch HS5B-02B IDEC/Izumi HS5B Safety Switch HS5B-02B

Small size: 30mm× 30mm×90mm, by changing the mounting direction of the top, the actuator can be inserted from 8 positions, so as to meet different installation needs. IP67 (IEC60529) protection structure is used for the contact parts. The NC contact has a direct disconnect operation structure. (IEC/EN60947 ...

IDEC/Izumi HS3A Non-contact Safety Switch HS3A-H21U4 IDEC/Izumi HS3A Non-contact Safety Switch HS3A-H21U4

The non-contact safety switch with RFID technology improves the safety performance. Built-in safety features make the construction of a safety system independent of the combination with specific modules. Thanks to the RFID method, there is no error even if the door closes slowly. Even when installed on swing doors, sliding ...

IDEC/Izumi HS6E Submersible Locking HS6E-P7Y4B03-G Safety Switch Solenoid Lock IDEC/Izumi HS6E Submersible Locking HS6E-P7Y4B03-G Safety Switch Solenoid Lock

IDEC/Izumi HS6E Submersible Locking HS6E-P7Y4B03-G The world's thinnest solenoid interlock switch 15mm wide Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions Energy saving - 24V DC/110 mA Three sides can be manually unlocked LED Indicator ...

IDEC/Izumi HE1G-L Handheld Enabling Switch HE9Z-GP15 IDEC/Izumi HE1G-L Handheld Enabling Switch HE9Z-GP15

The resin-based actuator for HS5 series safety switches can be easily mounted to the hand-held enabling switch with the two screws included. By combining a resin-based actuator with an HS5 series safety switch fixed to a mechanical device, it is easy to maintain the hand ...

IDEC/Izumi HE1G Handheld Enabling Switch HE9Z-GBK1-1N IDEC/Izumi HE1G Handheld Enabling Switch HE9Z-GBK1-1N

3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. Pressing ON ⇒ OFF is a direct open-circuit action function. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. (IEC60204-1; 9.2.5.8 ...

IDEC/Hequan Safety Interlock HS5L-XD7Y4M-G Interlock 2 CNT Solenoid Lock IDEC/Hequan Safety Interlock HS5L-XD7Y4M-G Interlock 2 CNT Solenoid Lock

2 Contacts, 1NC Gate, 1NC Monitor, Electromagnetic Lock Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: EN ISO14119 GS- ...

CATEGORIES BYPASS
Customer Service Center

Online Consultation:QQ


ContactContact

Contact: Manager Huang

Contact QQ: 3271883383

Contact number: 13522565663


Scan the code to add WeChat (please save the picture first on the mobile phone)

working hoursworking hours

Weekdays: 9:00-17:00

Holidays: Only emergencies are handled

Contact us

Contact us

Contact number QQ consultation
QQ consultation

3271883383

Company address
Back to top