|
IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP7005
By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored.
Ideal for installation on protective doors where positioning is difficult.
With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.
|
|
IDEC/Izumi HS1T HS1T-VD44ZLM-G solenoid safety switch
IDEC/Izumi HS1T Electromagnetic Safety Switch A high-locking strength solenoid safety switch suitable for large doors and large equipment.
Key features:
Locking strength of 5,000N or more, small size.
Rear locking release mechanical finger that can be confirmed on both the front and side ...
|
|
IDEC/Izumi HS1E-K Type Solenoid Safety Switch 3 Circuit Type HS1E-K844MSR-R-T004
All M3.5 wiring screws are used to improve the connection line.
The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit.
There is also a key with a portable key as standard for hostage control ...
|
|
IDEC/Izumi HS5E-K Series Miniature Lock
The HS5E series safety interlock switches provide a cost-effective solenoid door interlock in a compact housing. The standard 3 meter cable is available in 8 circuit configurations for both spring and solenoid lock types. The HS5E has a highly versatile metal head that can be rotated to allow for 8 different ...
|
|
IDEC/Izumi HS5E Electromagnetic Safety Switch HS9Z-FL53
The dimensions are 35×40×146mm.
This is a backside lock release button type that can be used for emergency evacuation, etc. A back-locking release button unit that can be mounted on an aluminum frame is also available.
4. The independent circuit type and the safety circuit are dualized, so that the circuit variety is more complete. , which can cope with small loads ...
|
|
IDEC/Izumi HS5D Safety Switch HS5D-02ZRN
It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.
It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...
|
|
IDEC/Izumi HE2B Enabling Switch HE2B-M211PN1
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 2 ⇒ 3 requires force and a clear sense of operation.
Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1(2005) ...
|
|
IDEC/Izumi HS5E-KVD003-2B501 Safety switch with key lock
VD circuit, key removal at unlock position, key 501, 3m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the unlocked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length 3 meters
Our customer-centric approach ...
|
|
IDEC/Izumi HE3B enabling switch
Vertical operating unit with ø16 mounting holes for easy installation. 2-contact 3-position switch for small teach pendants.
Key features:
Ergonomic, 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance.
Position 1 ⇒ 2, built-in snap-action switch with light ...
|
|
IDEC/Izumi HE3B Enabling Switch HE3B-M2PY
Ergonomic, 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance.
Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation.
Reduction of operating force in position 2 ...
|
|
IDEC/Izumi Safety Switch HS1B-024R-G
64x40x125 mm housing, direct opening action: If the doors are forcibly opened, the contacts will be disconnected even if they are welded or stuck, with or without indicator (red or green), available in 2 contact configurations (1NO/1NC or 2NC ), in accordance with ISO14119 ...
|
|
IDEC/Izumi HS7A-DMC non-contact safety switch HS7A-DMC5912
Small size (external dimensions: 7mm× 16mm×51mm).
Simple alignment during installation.
Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type).
IP67 protection structure.
Contact structure 1NC+1NO
Functional Specifications:
Yes or no indicator Yes
Environment...
|
|
IDEC/Izumi HS6E Submersible Locking HS6E-L44B03-G Safety Switch Snap Lock
IDEC/Izumi HS6E Submersible Locking HS6E-L44B03-G Safety Switch Spring Lock The world's thinnest electromagnetic interlock switch 15mm wide
Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions
Energy saving - 24V DC/110 mA
Three sides can be manually solved ...
|
|
IDEC/Hequan Safety Interlock HS5L Micro Lock HS5L-VD7Y4M-G Interlock 4 CNT Solenoid Lock
4 Contacts, 2NC Gate, 2NC Lock, Monitoring Circuit, Electromagnetic Lock
Compact body: 35x40x127mm
1400N locking strength
Gold-plated contacts for small loads
The head direction can be rotated
8 different actuator entries are allowed
Applicable standard: EN ISO14119
GS-ET-19 ...
|
|
IDEC/Izumi HS5E-KVA005-2B502 Safety switch with key lock
VA circuit, key removal at unlock position, key 502,5m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the unlocked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length: 5 meters
Our customer-centric approach ...
|
|
IDEC/Izumi HS6B Subminiature HS6B-03B05 Safety Interlock Switch 3NC
IDEC/Izumi HS6B Subminiature HS6B-03B05 Safety Interlock Switch 3NC 3NC Contact, 3m Cable
30x15x78mm enclosure
One-piece cables reduce wiring time
IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage)
Direct door opening action: ...
|
|
IDEC/Izumi Safety Interlock HS5L Micro Lock HS5L-VA44LM-G
4 Contacts, 1NC 1NO Door 1NC 1NO Lock Supervisory Circuit, Spring Lock, Rear Unlock Button
Compact body: 35x40x127mm
1400N locking strength
Gold-plated contacts for small loads
The head direction can be rotated
8 different actuator entries are allowed
Applicable standard: EN ...
|
|
IDEC/Hequan Safety Interlock HS5L Micro Lock HS5L-XF7Y4M-G Interlock 2 CNT Solenoid Lock
2 contacts, 2NC door monitoring circuitry, electromagnetic lock
Compact body: 35x40x127mm
1400N locking strength
Gold-plated contacts for small loads
The head direction can be rotated
8 different actuator entries are allowed
Applicable standard: EN ISO14119
GS-ET-19
|
|
IDEC/Izumi HS6E Submersible Locking HS6E-M7Y4B03-G Safety Switch Solenoid Lock
The world's thinnest solenoid interlock switch is 15mm wide
Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions
Energy saving - 24V DC/110 mA
Three sides can be manually unlocked
The LED indicator shows solenoid valve operation
Standard 3m cable (available on request)
|
|
IDEC/Izumi HS7A-DMC non-contact safety switch HS7A-DMC7912
Small size (external dimensions: 7mm× 16mm×51mm).
Simple alignment during installation.
Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type).
IP67 protection structure.
Mechanical Specifications:
Contact structure 2NO
Functional Specifications:
Yes or no indicator Yes
...
|