|
IDEC/Izumi HS5D Safety Switch HS5D-03ZRN
It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.
It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...
|
|
IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP5005
By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored.
Ideal for installation on protective doors where positioning is difficult.
With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.
|
|
IDEC/Izumi HS1L Electromagnetic Safety Switch HS1L-DQ7Y4KMSRM-G
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing status of the door and the ...
|
|
IDEC/Izumi HS6B Safety Switch HS9Z-A61
IDEC/Izumi HS6B type safety switch HS9Z-A61 Main features: 30mm×15mm×78mm small safety switch. 3 contacts of dual contact + auxiliary contact for applications with high safety requirements. (ISO13849-1, EN954-1)
Plugged in from 2 actuators on request
|
|
IDEC/Izumi HE1G Handheld Enabling Switch HE1G-21SMB
3 position action of OFF ⇒ ON ⇒ OFF to avoid danger.
Pressing ON ⇒ OFF is a direct open-circuit action function.
By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state.
(IEC60204-1; 9.2.5.8 ...
|
|
IDEC/Izumi HS3A Non-Contact Safety Switch HS9Z-H3F5M05
The non-contact safety switch with RFID technology improves the safety performance.
Built-in safety features make the construction of a safety system independent of the combination with specific modules.
Thanks to the RFID method, there is no error even if the door closes slowly.
Even when installed on swing doors, sliding ...
|
|
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VG44ZSM-G
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VG44ZSM-G 4 contacts 2NC, 1NO and 1NC, spring lock, side wires
5000N locking force is the smallest in the industry
Spring-loaded terminals prevent loose wires
Energy saving 200mA solenoid consumption
Electromagnetic locks and snap locks are available ...
|
|
IDEC/Izumi HS5E-KVA005-2C501 Safety switch with keylock
VA circuit, unplug the key in the LOCK position, key 501,5m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the locked position
Degree of protection IP65
Cable length: 5 meters
Our customer-centric service concept: the pursuit of a full range of services ...
|
|
IDEC/Izumi HS7A-DMC non-contact safety switch HS7A-DMC59110
Small size (external dimensions: 7mm× 16mm×51mm).
Simple alignment during installation.
Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type).
IP67 protection structure.
Mechanical Specifications:
Contact structure 1NC+1NO
Functional Specifications:
Detection distance ...
|
|
IDEC/Izumi HS5B Safety Switch HS5B-02B
Small size: 30mm× 30mm×90mm, by changing the mounting direction of the top, the actuator can be inserted from 8 positions, so as to meet different installation needs.
IP67 (IEC60529) protection structure is used for the contact parts.
The NC contact has a direct disconnect operation structure. (IEC/EN60947 ...
|
|
IDEC/Izumi HS6B type safety switch HS9Z-A62
IDEC/Izumi HS6B Safety Switch HS9Z-A6230mm×15mm×78mm Miniature Safety Switch. 3 contacts of dual contact + auxiliary contact for applications with high safety requirements. (ISO13849-1, EN954-1)
Depending on your needs, you can choose from 2 actuator inserts.
|
|
IDEC/Izumi HS5D Safety Switch HS9Z-A51
It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.
It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...
|
|
IDEC/Izumi HS5D Safety Switch HS5D-11ZRNM
It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.
It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...
|
|
IDEC/Izumi HE2B enabling switch
Multi-contact 3 position switch for large teach pendants. (max. 6 contacts)
Key features:
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 2 ⇒ 3 requires force and a clear sense of operation.
Press OFF (position 3) → ...
|
|
IDEC/Izumi HS1L Solenoid Safety Switch HS1L-R7Y4KMSRM-G
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HS5E-KVA0L03-2B Safety switch with keylock
VA circuit, key removal for unlock position, 3m cable, rear unlock button
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the unlocked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length 3 meters
Our customer-centric ...
|
|
IDEC/Izumi HS3A Non-Contact Safety Switch HS9Z-ZH31
The non-contact safety switch with RFID technology improves the safety performance.
Built-in safety features make the construction of a safety system independent of the combination with specific modules.
Thanks to the RFID method, there is no error even if the door closes slowly.
Even when installed on swing doors, sliding ...
|
|
IDEC/Izumi HS5D Safety Switch HS5D-02ZRNM
It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.
It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...
|
|
IDEC/Izumi HS6E Submersible Locking HS6E-M44B01-G Safety Switch Spring Lock
The world's thinnest solenoid interlock switch is 15mm wide
Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions
Energy saving - 24V DC/110 mA
Three sides can be manually unlocked
The LED indicator shows solenoid valve operation
Standard 3m cable (available on request ...
|
|
IDEC/Izumi HS5E-KVA0L03-2A safety switch with key lock
VA circuit, key removable in all positions, 3m cable, rear unlock button
Mechanical Specifications:
Product Category Safety Interlocks
Key removal location for all positions
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length 3 meters
Our customer-centric ...
|