All M3.5 wiring screws are used to improve the connection line.
The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit.
In addition, there is a key interlock type with a standard portable key that can realize hostage control, so you can carry the portable key into large equipment to ensure safety.
The actuator is mounted on the safety gate, the safety switch is installed on the mechanical body, and the gate can be automatically locked mechanically.
When the inertial operation of the machine is stopped, the electromagnetic coil is unlocked by an electronic signal from the controller, etc., for greater safety.
This is a resin safety switch with a locking strength of 3000N∗ by strengthening the locking mechanism and actuator.
The actuator insertion port of the main body has been enlarged to improve the ability to cope with the shaking of the door.
The key interlock type is available with 10 keys to choose from, eliminating the need for key swapping between adjacent devices.
There are two directions in which the actuator is inserted.
Double-insulated structure without grounding wire.
∗ Notation is a lock strength value in the horizontal direction (parallel to the panel).
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces IDEC/Hequan HS1E-K type electromagnetic safety switch 3 circuit type HS1E-K844MSR-R-T001 products, if you are interested in IDEC/Hequan, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
IDEC/Izumi HS1E-K Type Solenoid Safety Switch 3 Circuit Type HS1E-K844MSRP-G-T001
All M3.5 wiring screws are used to improve the connection line.
The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit.
There is also a key with a portable key as standard for hostage control ...
|
|
IDEC/Izumi HS5B Safety Switch HS5B-02B
Small size: 30mm× 30mm×90mm, by changing the mounting direction of the top, the actuator can be inserted from 8 positions, so as to meet different installation needs.
IP67 (IEC60529) protection structure is used for the contact parts.
The NC contact has a direct disconnect operation structure. （IEC/EN60947 ...
|
|
IDEC/Izumi HS5 series plug-type actuator
There is no need to perform the angle adjustment of the component end, and the position determination is simple and convenient. It can be installed horizontally and vertically, and can be easily mounted on various doors.
Key features:
There is no need to perform the angle adjustment of the component end, and the position determination is simple and convenient.
It can be installed horizontally and vertically, and can be easily installed ...
|
|
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-XH7Y4ZM-G
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-XH7Y4ZM-G 2 contacts 2NC, solenoid lock
5000N locking force is the smallest in the industry
Spring-loaded terminals prevent loose wires
Energy saving 200mA solenoid consumption
Electromagnetic lock and snaplock models are available
Mechanical Specifications:
Catheter open ...
|
|
IDEC/Izumi HS3A Non-Contact Safety Switch HS9Z-ZH31
The non-contact safety switch with RFID technology improves the safety performance.
Built-in safety features make the construction of a safety system independent of the combination with specific modules.
Thanks to the RFID method, there is no error even if the door closes slowly.
Even when installed on swing doors, sliding ...
|
|
IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP5002
By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored.
Ideal for installation on protective doors where positioning is difficult.
With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.
|
|
IDEC/Izumi HS6E Submersible Locking HS6E-N7Y4B03-G Safety Switch Solenoid Lock
IDEC/Izumi HS6E Submersible Locking HS6E-N7Y4B03-G Safety Switch Solenoid LockThe World's Thinnest Solenoid Interlock Switch 15mm wide
Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions
Energy saving - 24V DC/110 mA
Three sides can be manually solved ...
|
|
IDEC/Izumi HE6B enabling switch
Compact 3-position enable switch with auxiliary contact.
Key features:
Compact 3-position enable switch with auxiliary contacts.
Ergonomic OFF→ ON → OFF 3-position action for hazard avoidance.
Press OFF (position 3) → release OFF (position 1) ...
|
|
IDEC/Izumi Safety Interlock HS5L-XH44M-G Interlock 2 CNT Spring Lock
2 contacts, 2NC lock monitoring circuit, spring lock
Compact body: 35x40x127mm
1400N locking strength
Gold-plated contacts for small loads
The head direction can be rotated
8 different actuator entries are allowed
Applicable standard: EN ISO14119
GS-ET-19
|
|
IDEC/Izumi HS5E-KVD005-2C Safety switch with key lock
VD circuit, key removal at LOCK position, 5m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the locked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length: 5 meters
Our customer-centric service concept: ...
|
|
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS9Z-A15T HS1T Angle Adjustable Actuator
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS9Z-A15T HS1T Angle Adjustable Actuator
Product Category Actuators
The company has always been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all walks of life ...
|
|
IDEC/Izumi HS1E-K Type Solenoid Safety Switch 3 Circuit Type HS9Z-A1S
All M3.5 wiring screws are used to improve the connection line.
The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit.
There is also a key with a portable key as standard for hostage control ...
|
|
IDEC/Izumi HE3B Enabling Switch HE3B-M2
Ergonomic, 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance.
Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation.
Reduction of operating force in position 2 ...
|
|
IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP5015
By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored.
Ideal for installation on protective doors where positioning is difficult.
With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.
|
|
IDEC/Izumi HS5E-KVA003-2B501 Safety switch with key lock
VA circuit, key removal at unlock position, key 501, 3m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the unlocked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length 3 meters
Our customer-centric approach ...
|
|
IDEC/Izumi HS5E-KVA005-2B502 Safety switch with key lock
VA circuit, key removal at unlock position, key 502,5m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the unlocked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length: 5 meters
Our customer-centric approach ...
|
|
IDEC/Izumi Safety Interlock HS5L Micro Lock HS5L-VB44LM-G
4 Contacts, 1NC 1NO Door, 2NC Lock, Supervisory Circuit, Spring Lock, Rear Unlock Button
Compact body: 35x40x127mm
1400N locking strength
Gold-plated contacts for small loads
The head direction can be rotated
8 different actuator entries are allowed
Applicable standard: EN IS ...
|
|
IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-DQ7Y4KMSRP-R
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HS6E Submersible Locking HS6E-M7Y4B05-G Safety Switch Solenoid Lock
IDEC/Izumi HS6E Submersible Locking HS6E-M7Y4B05-G Safety Switch Solenoid LockThe World's Thinnest Solenoid Interlock Switch 15mm Wide
Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions
Energy saving - 24V DC/110 mA
Three sides can be manually solved ...
|
|
IDEC/Izumi HE2B Enabling Switch HE2B-M211PN1
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 2 ⇒ 3 requires force and a clear sense of operation.
Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...
|
|
Contact
working hours
