|
IDEC/Izumi HS5B type safety switch HS5B-11BM
Small size: 30mm× 30mm×90mm, by changing the mounting direction of the top, the actuator can be inserted from 8 positions, so as to meet different installation needs.
IP67 (IEC60529) protection structure is used for the contact parts.
The NC contact has a direct disconnect operation structure. (IEC/EN60947 ...
|
|
IDEC/Izumi HE6B enabling switch
Compact 3-position enable switch with auxiliary contact.
Key features:
Compact 3-position enable switch with auxiliary contacts.
Ergonomic OFF→ ON → OFF 3-position action for hazard avoidance.
Press OFF (position 3) → release OFF (position 1) ...
|
|
IDEC/Izumi Safety Interlock HS5E-K Micro Lock Safety switch with key lock HS5E-KVA003-2A502
Introduction: VA circuit, key detachable in all positions, key 502, 3m cable
Product Category Safety Interlocks
Key removal location for all positions
Degree of protection IP65
Cable length 3 meters
Our customer-centric service concept: a full range of services are pursued as a high...
|
|
IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-DQ7Y4KMSRP-R
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HE1G Handheld Enabling Switch HE1G-20ME-1N
Achieve an ergonomic grip. Built-in two hand-held enable switches with 3 positions.
3 position action of OFF ⇒ ON ⇒ OFF to avoid danger.
Pressing ON ⇒ OFF is a direct open-circuit action function.
Use OFF (position 3) ⇒ release ...
|
|
IDEC/Izumi HS5D Safety Switch HS5D-02ZRNM
It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.
It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...
|
|
IDEC/Izumi HS1E-K Type Solenoid Safety Switch 3 Circuit Type HS1E-K844MSR-R-T003
All M3.5 wiring screws are used to improve the connection line.
The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit.
There is also a key with a portable key as standard for hostage control ...
|
|
IDEC/Izumi HS6B Safety Switch HS9Z-A61
IDEC/Izumi HS6B type safety switch HS9Z-A61 Main features: 30mm×15mm×78mm small safety switch. 3 contacts of dual contact + auxiliary contact for applications with high safety requirements. (ISO13849-1, EN954-1)
Plugged in from 2 actuators on request
|
|
IDEC/Izumi Safety Interlock HS5L Micro Lock HS9Z-DH5LH Door Handle Actuator (Left.)
IDEC/Izumi Safety Interlock HS5L Micro Lock HS9Z-DH5LH Door Handle Actuator (Left.)
Doorknob Actuator Handle Unit, Left Hand Door
Product Category: Door Handle Actuators
The company has always been customer-centric, the concept of creating value for customers, winning the market with quality and service, ...
|
|
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VJ7Y4ZM-G
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VJ7Y4ZM-G 4 contacts 1NC & 2NC, 1NO, solenoid lock
5000N locking force is the smallest in the industry
Spring-loaded terminals prevent loose wires
Energy saving 200mA solenoid consumption
Electromagnetic lock and snaplock models are available
Rules...
|
|
IDEC/Izumi HS1C type electromagnetic safety switch
Locks the guards until the machinery stops and the danger of inertia disappears.
Key features:
The actuator is mounted on the guard, the safety switch is mounted on the mechanical body, and the mechanical locking guard is installed.
After the inertial action of the machine is stopped, the electrical signal of the controller ...
|
|
IDEC/Hequan Safety Interlock HS5L-XD7Y4M-G Interlock 2 CNT Solenoid Lock
2 Contacts, 1NC Gate, 1NC Monitor, Electromagnetic Lock
Compact body: 35x40x127mm
1400N locking strength
Gold-plated contacts for small loads
The head direction can be rotated
8 different actuator entries are allowed
Applicable standard: EN ISO14119
GS- ...
|
|
IDEC/Izumi Safety Interlock HS5L Micro Lock HS9Z-A53 Safety Switch Actuator Key
IDEC/Izumi Safety Interlock HS5L Micro Lock HS9Z-A53 Safety Switch Actuator Key
Key features:
Angle-adjustable (vertical) actuators
Product Category Actuators
The company has always been customer-centric, the concept of creating value for customers, and winning with quality and service.
|
|
IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP7015
By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored.
Ideal for installation on protective doors where positioning is difficult.
With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.
|
|
IDEC/Izumi HS3A non-contact safety switch
The product unit has obtained safety category 4 certification, and it is a non-contact safety switch with RFID method.
Key features:
The non-contact safety switch with RFID technology improves the safety performance.
Built-in safety features make the construction of a safety system independent of the combination with specific modules.
Due to the ...
|
|
IDEC/Izumi HS5E-KVA0L03-2A501 Safety switch with keylock
VA circuit, key detachable in all positions, key 501, 3m cable, rear unlock button
Mechanical Specifications:
Product Category Safety Interlocks
Key removal location for all positions
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length 3 meters
We take the guest ...
|
|
IDEC/Izumi HE2B Enabling Switch HE2B-M211PB
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 2 ⇒ 3 requires force and a clear sense of operation.
Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1(2005) ...
|
|
IDEC/Izumi HS7A-DMC non-contact safety switch HS7A-DMC79110
Small size (external dimensions: 7mm× 16mm×51mm).
Simple alignment during installation.
Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type).
IP67 protection structure.
Mechanical Specifications:
Contact structure 2NO
Functional Specifications:
The detection distance is 10m
...
|
|
IDEC/Izumi HE6B enabling switch HE6B-M200Y
Compact 3-position enable switch with auxiliary contacts.
Ergonomic OFF→ ON → OFF 3-position action for hazard avoidance.
Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed.
IEC60204-1(2005) ...
|
|
IDEC/Izumi HS5E-K Series Key-Locking Safety Switch HS5E-KVD0L05-2B502
The operating head detachment detection function is standard.
The key is made of a high-security bullet lock. There are 16 key numbers to choose from.
There is a rear unlock button type for emergency evacuation and other purposes, and it can be attached to the rear lock release button unit attached to the aluminum frame.
Adopt a small negative ...
|