IDEC/Izumi HS6E Submersible Locking HS6E-P7Y4B03-G Safety Switch Solenoid Lock

Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance. Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation. Reduction of operating force in position 2 ...

All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...

The actuator is mounted on the guard, the safety switch is mounted on the mechanical body, and the mechanical locking guard is installed. When the inertial action of the machine stops, the electromagnetic coil excitation is unlocked by an electrical signal from the controller, etc., for greater safety. In the event of a power outage and maintenance, special tools can be used ...

4 contacts, 3NC door, 1NC lock, monitoring circuit, spring lock, rear unlock button Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: EN ISO1411 ...

Vertical operating unit with ø16 mounting holes for easy installation. 2-contact 3-position switch for small teach pendants. Key features: Ergonomic, 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance. Position 1 ⇒ 2, built-in snap-action switch with light ...

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

The non-contact safety switch with RFID technology improves the safety performance. Built-in safety features make the construction of a safety system independent of the combination with specific modules. Thanks to the RFID method, there is no error even if the door closes slowly. Even when installed on swing doors, sliding ...

By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored. Ideal for installation on protective doors where positioning is difficult. With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.

Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance. Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation. Reduction of operating force in position 2 ...

Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance. Position 2 ⇒ 3 requires force and a clear sense of operation. Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...

All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...

4 Contacts, 2NC Door, 1NC 1NO Lock Monitoring Circuit, Spring Lock, Rear Unlock Button Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: EN ISO ...

Compact 3-position enable switch with auxiliary contacts. Ergonomic OFF→ ON → OFF 3-position action for hazard avoidance. Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...

VD circuit, key detachable in all positions, 5m cable Mechanical Specifications: Product Category Safety Interlocks Key removal location for all positions Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length: 5 meters Our customer-centric service concept: all-round ...

IDEC/Izumi HS6E Submersible Locking HS6E-L44B03-G Safety Switch Spring Lock The world's thinnest electromagnetic interlock switch 15mm wide Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions Energy saving - 24V DC/110 mA Three sides can be manually solved ...

All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...

The HS1B is a full-size interlock switch in a more rugged industrial die-cast aluminum housing. Options include red or green LED indicators, as well as two different circuit configurations. The HS2B comes with an optional red or green LED indicator and features the same ...

3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. (IEC60204-1:2005, 10.9 terms, IEC60947-5-8:2007, 7.1.9 terms),

IDEC/Izumi HS6E-P44B01-G Safety Switch Springlock The world's thinnest solenoid interlock switch 15mm wide Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions Energy saving - 24V DC/110 mA Three sides can be manually unlocked LED indicator ...

IDEC/Izumi HS6E Submersible Locking HS6E-N44B01-G Safety Switch Springlock The World's Thinnest Solenoid Interlock Switch 15mm Wide Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions Energy saving - 24V DC/110 mA Manually unlockable on three sides ...