Introduction: BD-C series communication converter is used for RS232C/RS485 communication of BD series laser displacement sensor. By connecting the sensor amplifier unit with a side connector, the communication converter can be powered. The atDisplacement laser displacement sensor software allows the user to process parameter settings in batches without connecting to a host device, monitor measurements and outputs in real time, and set communication speeds and addresses.
Product Details
Simultaneous support of RS232C/RS485 communication in one communication converter:
RS232C/RS485 port to meet the user's convenience needs
Up to 8 amplifier units can be connected
Power is supplied via the amplifier unit, no additional wiring is required
Dedicated device management program (atDisplacement) support
Set batch parameters via the save/load function
Real-time monitoring of measured values and output status
The communication speed/station number can be set via the side DIP S/W switch without connecting to the host device
The supply voltage uses the power supply of the amplifier unit.
Ambient temperature -10 - 50 °C, storage: -15 - 60 °C
Degree of protection IP40 (IEC standard)
The ambient humidity is 85%RH or less, and when stored: 85%RH or less
Material Housing: PC
Accessory side connector, RS485 connector
Weight: approx. 91 g (approx. 49 g)
Communication speed: 9600, 19200, 38400, 115200bps (default)
Power consumption Max. 2.3W
Separately sold communication converters (SCM-38I, SCM-US48I, SCM-WF48)
Features• Real-time monitoring
• Performs all BD Series functions and sets parameters via an external device (master device).
Vibration resistance: 10-55Hz (cycle 1 minute), amplitude 1.5mm, X, Y, Z directions for 2 hours
Impact resistance 300 m/s² (approx. 30 G) X, Y, Z 3 times in each direction
Communication function: RS-232C, RS-485
표시부 4 LED status indicators
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the Autonics/Autonics displacement sensor BD-CRS 91g products, if you are interested in Autonics/Autonics displacement sensor, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Autonics/Autonics Photoelectric Sensor BYD100-DDT Infrared LED
Introduction: The BYD series of small amplifier built-in photoelectric sensors are extremely cost-effective, and their compact size and various detection methods (through-beam, diffuse, and limited distance reflection) make them ideal for a wide range of user applications. In addition, BYD30-DDT-you and BYD50-DDT-U...
|
|
Autonics/Autonics photoelectric sensor BJ10M-TDT detects 10m
Introduction: BJ series high-performance photoelectric sensors have excellent anti-interference performance, effectively prevent the influence of external light, and achieve ideal detection performance. Light ON/Dark ON action mode switch and sensitivity adjuster for easy setup (except BJG-DDT). BJ series has a variety of detection modes ...
|
|
Autonics BTS series of ultra-miniature photoelectric sensors
Description: The BTS series of ultra-miniature photoelectric sensors is ideal for installation in limited spaces and compact applications. With a size of only 7.2 mm and a built-in amplifier, the sensor is capable of detecting tiny objects, including metal wires and semiconductor chips. The BTS series also adopts IP67 protective structure and stainless ...
|
|
Autonics/Autonics Photoelectric Sensor BJX1M-DDT Diffuse Reflective Type
Description: The BJX series of small photoelectric sensors has a high-performance lens with a detection distance of up to 30 m. The sensor also has excellent immunity to interference and has little impact on ambient light, allowing for accurate and reliable detection and presence. Anti-mutual interference function, allowing close ...
|
|
Autonics/Autonics pressure sensor PSK2-C1CNV-R1/8
Introduction: Autonics/Autonics PSK2 series 2-segment display pressure transducer can display the current value (PV) and set value (SV) at the same time, and can also switch between red and green colors according to the setting and status. Not only can the setting status be displayed, but also the power-saving mode and fine-tuning function are provided to ...
|
|
Autonics photoelectric sensor BJX100-DDT-C-P 60g
Description: The BJX series of small photoelectric sensors has a high-performance lens with a detection distance of up to 30 m. The sensor also has excellent immunity to interference and has little impact on ambient light, allowing for accurate and reliable detection and presence. Anti-mutual interference function, allowing close ...
|
|
Autonics/Autonics photoelectric sensor BTF1M-TDTD detects 1m
Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also adopts IP67 protective structure and stainless steel safety ...
|
|
Autonics/Autonics Pressure Sensor PSS-01V-R1/8 Compact
Introduction: PSS series analog pressure sensor is small in size, compact in structure (W11.8 X H29.3 XD24.8mm, including pressure interface), adopts analog voltage/current output, can be directly connected with HMI, PC, PLC, and has a wide rated pressure range, suitable for various working environments.
...
|
|
Autonics/Autonics Displacement Sensor BD-065 Diffuse Reflectance
Introduction: BD series laser displacement sensor can measure the thickness, width, horizontal difference, parallax, bending, flatness of the target object by detecting the amount of displacement. Regardless of the target color or material, the sensor provides accurate and stable measurement results. Sensor head and amplifier unit ...
|
|
Autonics displacement sensor BD-100 approx. 233g
Introduction: BD series laser displacement sensor can measure the thickness, width, horizontal difference, parallax, bending, flatness of the target object by detecting the amount of displacement. Regardless of the target color or material, the sensor provides accurate and stable measurement results. Sensor head and amplifier unit ...
|
|
Autonics photoelectric sensor BRQT5M-TDTA-C-P
Introduction: Ø18mm cylindrical photoelectric sensor BRQ series products are divided into front and side detection types according to the detection method, and are divided into plastic, metal (brass nickel plated), and SUS316L materials according to the material, which can meet the needs of users in a variety of environments. The maximum detection distance of this product can reach 30m, with ...
|
|
Autonics Photoelectric Sensor BS5-P1ML Pushbutton Type
Introduction: Regardless of the material, color or reflectivity of the target object, the BS5-P series pushbutton photoelectric sensors are capable of precise detection. Optical inspection with push-button operation ensures a higher mechanical life than traditional mechanical switches, up to 5 million operations. Contains 4 ...
|
|
Autonics Sensor BD-030 30mm pluggable type
Introduction: BD series laser displacement sensor can measure the thickness, width, horizontal difference, parallax, bending, flatness of the target object by detecting the amount of displacement. Regardless of the target color or material, the sensor provides accurate and stable measurement results. Sensor head and amplifier unit ...
|
|
The Autonics/Autonics photoelectric sensor BC15-LDT-C has a response of 500μs
Introduction: The BC series of color scale sensors provide excellent color matching accuracy for highly reliable and stable color detection. The sensor uses a 12-bit RGB 3-color LED light source to determine the presence or absence of an object by comparing the set color with the detected color. Contains 2 detection modes, each with 3 ...
|
|
Autonicx/Autonics Fiber Optic Sensor BF5R-D1-N Dual Display
Introduction: BF5 Series Single/Dual Display Fiber Optic Amplifier BF5 Series has 5 different response speed settings to achieve a high resolution of 1/10,000, which can easily realize the function of detecting high-speed moving objects as well as small objects. In addition, the product can achieve 8 ...
|
|
Autonics photoelectric sensor BR20M-TDTD Ø15mm
Introduction: Cylindrical (Ø18mm) photoelectric sensor BR series, to achieve long-distance detection (20m), high-speed response time (less than 1ms). Advanced digital signal processing is adopted, and the anti-interference performance is stronger. The BR series has 4 different detection methods, increasing the user's choice of application ...
|
|
Autonics/Autonics Photoelectric Sensor BR400-DDT Diffuse Reflective Type
Introduction: Cylindrical (Ø18mm) photoelectric sensor BR series, to achieve long-distance detection (20m), high-speed response time (less than 1ms). Advanced digital signal processing is adopted, and the anti-interference performance is stronger. The BR series has 4 different detection methods, increasing the user's choice of application ...
|
|
Autonics BUP-30 U-shaped photoelectric sensor
BUP Series: The U-shaped photoelectric sensor BUP series is available in 30 mm and 50 mm sensing distance models with adjustable sensitivity, extending the flexibility of various applications.
Details:
Detection Type: Thru-beam type
Detection channel: 1 channel
Detection distance: 30mm
Detect: Opaque object Min ...
|
|
Autonics photoelectric sensor BTF1M-TDTD-P ultra-low profile
Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also adopts IP67 protective structure and stainless steel safety ...
|
|
The Autonics photoelectric sensor BJ100-DDT weighs approximately 45 g
Introduction: BJ series high-performance photoelectric sensors have excellent anti-interference performance, effectively prevent the influence of external light, and achieve ideal detection performance. Light ON/Dark ON action mode switch and sensitivity adjuster for easy setup (except BJG-DDT). BJ series has a variety of detection modes ...
|
|
Contact
working hours
