Introduction: The BYD series of small amplifier built-in photoelectric sensors are extremely cost-effective, and their compact size and various detection methods (through-beam, diffuse, and limited distance reflection) make them ideal for a wide range of user applications. In addition, the action indicator of the BYD30-DDT-you and BYD50-DDT-U models is located on the top of the product so that users can better identify the operating status.
Features:
Ultra-small dimensions: W 12 × H 32 × L 18 mm
Superior detection capability independent of the color of the detected object (limited distance reflection type)
Action Indicator (Red LED) :
(BYD30-DDT-U, BYD50-DDT-U: Indicator at the top)
There is a delay function, and the delay time can be adjusted (OFF delay time: 0.1 - 2 seconds adjustable)
Built-in reverse polarity protection circuit and output overcurrent (short circuit) protection circuit
Product parameters
Detection type: diffuse reflection type
Detection distance: 100mm
Detection: Opaque objects, translucent objects
Light source: infrared LED
Response time:
Action: Max. 3ms,
Reset: Max. 100ms
Power supply voltage: 12-24VDC±10% (ripple P-P: Max.10%)
Current consumption: Max.35mA
Sensitivity Adjustment: Sensitivity Adjuster
Action Mode: Light ON
Control Output: NPN Open Collector
Connection Cable Type: Wiring Lead-out Type (Ø3.5, 2m)
Environment: Illuminance: Sunlight: Max.11,000lx, Incandescent Lamp: Max.3,000lx (Receiving surface illumination)
Ambient temperature: -20-65°C, storage: -25-70°C
Degree of protection: IP50
Ambient humidity: 35-85%RH, storage: 35-85%RH
Differential distance: 25% of the maximum detection distance
Material: Shell: ABS, Lens: Acrylic, Bracket: Cold Heading Steel Plate, Bolt: SCM, Nut: SCM, Sleeve: Nickel Plated Brass
Weight: Approximately 70 g
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
This article introduces the Autonics/Autonics photoelectric sensor BYD100-DDT infrared LED products, if you are interested in Autonics/Autonics photoelectric sensor, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Autonics Photoelectric Sensor BJ3M-PDT 12-24VDC
Introduction: BJ series high-performance photoelectric sensors have excellent anti-interference performance, effectively prevent the influence of external light, and achieve ideal detection performance. Light ON/Dark ON action mode switch and sensitivity adjuster for easy setup (except BJG-DDT). BJ series has a variety of detection modes ...
|
|
The Autonics pressure sensor PSB-01-M5 weighs approximately 160g
Description: The PSB series of compact digital pressure sensors features high display resolution and fast response times for optimal performance. It also has a variety of output modes and features, making it ideal for a wide range of pressure-related applications. The bright LED display enables users to quickly and easily ...
|
|
Autonics photoelectric sensor BTF1M-TDTD-P ultra-low profile
Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also adopts IP67 protective structure and stainless steel safety ...
|
|
Autonics/Autonics Photoelectric Sensor BR400-DDT Diffuse Reflective Type
Introduction: Cylindrical (Ø18mm) photoelectric sensor BR series, to achieve long-distance detection (20m), high-speed response time (less than 1ms). Advanced digital signal processing is adopted, and the anti-interference performance is stronger. The BR series has 4 different detection methods, increasing the user's choice of application ...
|
|
Autonics miniature photoelectric sensor BS5-F1R-P 50kg
Description: The BS5 series of miniature photoelectric sensors are available in 8 different form factors (K, T, V, L, Y, F, R, TA) to provide maximum flexibility for a wide range of user applications and installation setups. The sensor is designed to minimize malfunction caused by foreign objects. The sensor has a high visual ...
|
|
Autonics/Autonics photoelectric sensor BTF1M-TDTD detects 1m
Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also adopts IP67 protective structure and stainless steel safety ...
|
|
Autonics photoelectric sensor BTF1M-TDTL Ø2 mm
Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also adopts IP67 protective structure and stainless steel safety ...
|
|
Autonics BJX3M-PDT-P photoelectric sensor
Product introduction: The BJX series of small photoelectric sensors has a high-performance lens with a detection distance of up to 30 m. The sensor also has excellent immunity to interference and has little impact on ambient light, allowing for accurate and reliable detection and presence. Anti-mutual interference function, allowing ...
|
|
Autonics Photoelectric Sensor BX700-DDT Diffuse Reflective Type
Introduction: The built-in photoelectric sensor of BEN series amplifier can be divided into AC/DC general type and DC type. Built-in timer for ON delay, OFF delay and one-shot delay. Users can also switch between Light ON and Dark ON modes using the control cable, and sensitivity ...
|
|
Autonics pressure sensor PSK1-C1C-R1/8 approx. 62 g
Introduction: Autonicx/Autonics PSK1 series two-stage display pressure transducers that display both the current value (PV) and the set value (SV). In addition to displaying the setting status, it also provides a power-saving mode and a fine-tuning function to improve the user's convenience.
...
|
|
Autonics photoelectric sensor BRQP400-DDTA is about 60 g
Introduction: Ø18mm cylindrical photoelectric sensor BRQ series products are divided into front and side detection types according to the detection method, and are divided into plastic, metal (brass nickel plated), and SUS316L materials according to the material, which can meet the needs of users in a variety of environments. The maximum detection distance of this product can reach 30m, with ...
|
|
Autonics Photoelectric Sensor BJP100-BDT BGS Reflective Type
Introduction: The BJP series photoelectric sensors are optimized for printed circuit board (PCB) inspection with a 30 mm x 3 mm rectangular beam and background suppression (BGS) detection method. The sensor can be stably detected without being affected by holes, grooves, incomplete machining or protrusions on the PCB.
|
|
Autonics/Autonics pressure sensor PSK2-C1CNV-R1/8
Introduction: Autonics/Autonics PSK2 series 2-segment display pressure transducer can display the current value (PV) and set value (SV) at the same time, and can also switch between red and green colors according to the setting and status. Not only can the setting status be displayed, but also the power-saving mode and fine-tuning function are provided to ...
|
|
Autonics Sensor BD-030 30mm pluggable type
Introduction: BD series laser displacement sensor can measure the thickness, width, horizontal difference, parallax, bending, flatness of the target object by detecting the amount of displacement. Regardless of the target color or material, the sensor provides accurate and stable measurement results. Sensor head and amplifier unit ...
|
|
Autonics Photoelectric Sensor BJR3M-PDT Red LED
Introduction: The BJR series is an oil-resistant/oil-proof photoelectric sensor, which is suitable for various environments such as cutting oil and lubricating oil, such as the automotive and machine tool industries. The maximum detection distance is up to 15 m (through-beam type), and various functions such as M.S.R (mirror suppression) and anti-mutual interference are available to achieve stable and error-free ...
|
|
The Autonics photoelectric sensor BJ10M-TDT-C weighs 20g
Introduction: The BJ series of multi-functional photoelectric sensors uses high-performance lenses to achieve long-distance detection, excellent anti-interference characteristics and external light reduction functions, and achieve the world's highest detection performance. There is also a built-in anti-mutual interference function for tight installation, compact design, ...
|
|
Autonics Photoelectric Sensor BS5-P1ML Pushbutton Type
Introduction: Regardless of the material, color or reflectivity of the target object, the BS5-P series pushbutton photoelectric sensors are capable of precise detection. Optical inspection with push-button operation ensures a higher mechanical life than traditional mechanical switches, up to 5 million operations. Contains 4 ...
|
|
Autonics/Photoelectric Sensor BEN3M-PDT Current 50mA
Introduction: The built-in photoelectric sensor of BEN series amplifier can be divided into AC/DC general type and DC type. The user can also switch between Light ON and Dark ON modes using the control cable, and a sensitivity adjuster (except for thru-beam types) is included for easy setup. The use of dedicated IC to improve the anti-...
|
|
Autonics photoelectric sensor BRQT5M-TDTA-C-P
Introduction: Ø18mm cylindrical photoelectric sensor BRQ series products are divided into front and side detection types according to the detection method, and are divided into plastic, metal (brass nickel plated), and SUS316L materials according to the material, which can meet the needs of users in a variety of environments. The maximum detection distance of this product can reach 30m, with ...
|
|
Autonics/Autonics photoelectric sensor BTF30-DDTL responds 1ms
Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also adopts IP67 protective structure and stainless steel safety ...
|
|
Contact
working hours
