Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also features an IP67 protective structure and stainless steel mounting bracket to provide a durable and reliable sensing solution in a variety of environments.
Features:
Ultra-thin size, only 3.7mm thick
- W 13 x H 19 x L 3.7 mm (through-beam type)
- W 13 x H 24 x L 3.7 mm (diffuse, BGS)
Detection method and minimum assay size
- Thru-beam type (BTF1M): Ø2 mm
- Diffuse reflective type (BTF30): Ø0.2 mm (detection distance 10mm)
- BGS reflective type (BTF15): Ø0.2 mm (detection distance 10mm)
The detection distance may vary depending on environmental factors
Maximum detection distance: 1 m (through-beam type)
Stability indicator (green LED) and action indicator (red LED)
Stainless steel 304 mounting bracket
IP67 protection (IEC standard)
Product parameters
Detection Type: Thru-beam type
Detection distance: 1m
Detection object: Opaque object Min.Ø2mm
Light source: Red LED (650nm)
Response time: Max.1ms
Power supply voltage: 12-24VDC±10% (ripple P-P: Max.10%)
Current consumption: Luminaire/receiver: Max.20mA
Action Mode: Dark ON
Control Output: NPN Open Collector
Connection cable type: Wiring lead type (Ø2.5, 2m)
Environment: Illuminance: Sunlight: Max.10,000lx, Incandescent Lamp: Max.3,000lx (Receiving Surface Illumination)
Ambient temperature: -25-55°C, Storage: -40-70°C
Degree of protection: IP67
Ambient humidity: 35-85%RH, storage: 35-85%RH
Material:
Housing: PMMA, Inspection Department: PMMA,
Bracket: SUS304 (304 stainless steel), Bolt: Carbon steel, Nut: SUS304 (304 stainless steel)
Weight: Approx. 98 g (approx. 40 g)
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
This article introduces the Autonics/Autonics photoelectric sensor BTF1M-TDTD detection distance 1m product, if you are interested in Autonics/Autonics photoelectric sensor, also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Autonics photoelectric sensor BR20M-TDTD Ø15mm
Introduction: Cylindrical (Ø18mm) photoelectric sensor BR series, to achieve long-distance detection (20m), high-speed response time (less than 1ms). Advanced digital signal processing is adopted, and the anti-interference performance is stronger. The BR series has 4 different detection methods, increasing the user's choice of application ...
|
|
Autonics photoelectric sensor BRQP400-DDTA is about 60 g
Introduction: Ø18mm cylindrical photoelectric sensor BRQ series products are divided into front and side detection types according to the detection method, and are divided into plastic, metal (brass nickel plated), and SUS316L materials according to the material, which can meet the needs of users in a variety of environments. The maximum detection distance of this product can reach 30m, with ...
|
|
Autonics sensor BRQM5M-TDTA-P through-beam type
Introduction: Ø18mm cylindrical photoelectric sensor BRQ series products are divided into front and side detection types according to the detection method, and are divided into plastic, metal (brass nickel plated), and SUS316L materials according to the material, which can meet the needs of users in a variety of environments. The maximum detection distance of this product can reach 30m, with ...
|
|
Autonics photoelectric sensor BRQT5M-TDTA-C-P
Introduction: Ø18mm cylindrical photoelectric sensor BRQ series products are divided into front and side detection types according to the detection method, and are divided into plastic, metal (brass nickel plated), and SUS316L materials according to the material, which can meet the needs of users in a variety of environments. The maximum detection distance of this product can reach 30m, with ...
|
|
Autonics/Autonics photoelectric sensor BRQPS700-DDTA-P
Introduction: Ø18mm cylindrical photoelectric sensor BRQ series products are divided into front and side detection types according to the detection method, and are divided into plastic, metal (brass nickel plated), and SUS316L materials according to the material, which can meet the needs of users in a variety of environments. The maximum detection distance of this product can reach 30m, with ...
|
|
Autonics level detection sensor BL13-TDT through-beam type
Introduction: BL series liquid level detection sensor can detect liquid level through transparent/translucent tubes with an outer diameter of Ø6-13mm and a thickness of 1mm. The Light ON/Dark ON action mode can be selected by pressing the button, and the LED indicator (red/green) on the back of the product can be used to easily confirm the product.
|
|
Autonics/Autonics photoelectric sensor BYD3M-TDT through-beam type
Introduction: The BYD series of small amplifier built-in photoelectric sensors are extremely cost-effective, and their compact size and various detection methods (through-beam, diffuse, and limited distance reflection) make them ideal for a wide range of user applications. In addition, BYD30-DDT-you and BYD50-DDT-U...
|
|
Autonics Photoelectric Sensor BJP100-BDT-P Reflective Type
Introduction: The BJP series photoelectric sensors are optimized for printed circuit board (PCB) inspection with a 30 mm x 3 mm rectangular beam and background suppression (BGS) detection method. The sensor can be stably detected and is not affected by holes, grooves, incomplete machining or protrusions on the PCB board. ...
|
|
The Autonics/Autonics photoelectric sensor BA2M-DDT weighs approximately 50 g
Introduction: BA series diffuse reflective photoelectric sensors use specially designed optical components with a detection distance of up to 2 meters. The sensor can be used in both Light ON and Dark ON modes and comes with a built-in sensitivity adjuster. The action/stability indicator light allows the user to easily identify the operating status ...
|
|
Autonics Photoelectric Sensor BX700-DDT Diffuse Reflective Type
Introduction: The built-in photoelectric sensor of BEN series amplifier can be divided into AC/DC general type and DC type. Built-in timer for ON delay, OFF delay and one-shot delay. Users can also switch between Light ON and Dark ON modes using the control cable, and sensitivity ...
|
|
Autonics/Autonics BD Series Laser Displacement Sensors
Introduction: BD series laser displacement sensor can measure the thickness, width, horizontal difference, parallax, bending, flatness of the target object by detecting the amount of displacement. Regardless of the target color or material, the sensor provides accurate and stable measurement results. Sensor head and amplifier single ...
|
|
Autonics Photoelectric Sensor BJX15M-TDT-P approx. 145g
Introduction: The BJX series of small photoelectric sensors have a high-performance lens with a detection distance of up to 30m. The sensor is also highly resistant to interference and has a low impact on ambient light**, allowing for accurate and reliable detection and presence. Anti-mutual interference function allows close proximity to each other.
|
|
Autonics photoelectric sensor BYD3M-TDT-P through-beam type
Introduction: The BYD series of small amplifier built-in photoelectric sensors are extremely cost-effective, and their compact size and various detection methods (through-beam, diffuse, and limited distance reflection) make them ideal for a wide range of user applications. In addition, BYD30-DDT-you and BYD50-DDT-U...
|
|
Autonics Photoelectric Sensor BUP-50-P Thru-Beam Type
Introduction: The U-shaped photoelectric sensor BUP series is available in 30mm, 50mm detection distance models, adjustable sensitivity, expanding the flexibility of various applications, Light ON/Dark ON (control line setting) operation mode.
Product parameters
...
|
|
Autonics BTS series of ultra-miniature photoelectric sensors
Description: The BTS series of ultra-miniature photoelectric sensors is ideal for installation in limited spaces and compact applications. With a size of only 7.2 mm and a built-in amplifier, the sensor is capable of detecting tiny objects, including metal wires and semiconductor chips. The BTS series also adopts IP67 protective structure and stainless ...
|
|
Autonics BJX3M-PDT-P photoelectric sensor
Product introduction: The BJX series of small photoelectric sensors has a high-performance lens with a detection distance of up to 30 m. The sensor also has excellent immunity to interference and has little impact on ambient light, allowing for accurate and reliable detection and presence. Anti-mutual interference function, allowing ...
|
|
Autonics/Autonics photoelectric sensor BJ10M-TDT detects 10m
Introduction: BJ series high-performance photoelectric sensors have excellent anti-interference performance, effectively prevent the influence of external light, and achieve ideal detection performance. Light ON/Dark ON action mode switch and sensitivity adjuster for easy setup (except BJG-DDT). BJ series has a variety of detection modes ...
|
|
Autonics/Autonics photoelectric sensor BS5-L1M-P through-beam type
Introduction: The BS5 series of miniature photoelectric sensors are available in 8 different form factors (K, T, V, L, Y, F, R, TA) to provide maximum flexibility for a wide range of user applications and installation settings. The sensor is designed to minimize malfunction caused by foreign objects. The sensor has the highest visibility ...
|
|
Autonics Photoelectric Sensor BS5-P1ML Pushbutton Type
Introduction: Regardless of the material, color or reflectivity of the target object, the BS5-P series pushbutton photoelectric sensors are capable of precise detection. Optical inspection with push-button operation ensures a higher mechanical life than traditional mechanical switches, up to 5 million operations. Contains 4 ...
|
|
Autonics Photoelectric Sensor BJP100-BDT BGS Reflective Type
Introduction: The BJP series photoelectric sensors are optimized for printed circuit board (PCB) inspection with a 30 mm x 3 mm rectangular beam and background suppression (BGS) detection method. The sensor can be stably detected without being affected by holes, grooves, incomplete machining or protrusions on the PCB.
|
|
Contact
working hours
