Introduction: The BC series of color scale sensors provide excellent color matching accuracy for highly reliable and stable color detection. The sensor uses a 12-bit RGB 3-color LED light source to determine the presence or absence of an object by comparing the set color with the detected color. It includes two detection modes, each with three sensitivity settings, to achieve the industry's highest level of color recognition. This product can recognize the color of small objects and labels through the W1.24 X L6.7mm rectangular light spot. IP67 protection level, waterproof and dustproof, can be used in spray and cleaning environments with peace of mind.
Features:
Excellent color matching accuracy
- RGB 3-color light-emitting LED light source with 12-bit resolution
- Support color ratio recognition (C), color ratio + light and dark recognition (C+I) detection modes
- 3 adjustable sensitivity settings for each detection mode (high sensitivity, normal, low sensitivity)
Reduces external light interference, minimizes errors, and achieves stable detection
You can check the setting color by using the teaching indicator
Operation Indicator (Red LED), Stability Indicator (Green LED), Time Delay Indicator (Orange LED)
Product functions can be set by using an external wiring input
W 1.24 x L 6.7 mm rectangular spot for detecting tiny objects and the color of labels
IP67 protection (IEC standard)
Product parameters
Detection type: Limited-distance reflection type
Detection distance: 15mm
Detection object: Color (opaque, translucent)
Light source: Full color LED (red, green, blue)
Response time: 500μs
Power supply voltage: 12-24VDC±10% (ripple P-P: Max.10%)
Current consumption: Max. 30mA
Sensitivity adjustment: 3 steps
Action Modes: Color, Color + Light and Dark
Control Output: NPN Open Collector
Timer Function: Timer function
Connection Cable Type: Pluggable Type (M12)
Environment: Illuminance Incandescent Lamp: Max. 3,000lx
Ambient temperature: -10-55°C, Storage: -25-75°C
Degree of protection: IP67
Ambient humidity: 35-85%RH, storage: 35-85%RH
Differential distance: 20% of the maximum detection distance (depending on detection mode or sensitivity)
Spot size: 1.24×6.7mm (rectangular)
Detection mode: C (color) mode, C+I (color + light and dark) mode
Output Mode: Color Match Output, Color Mismatch Output
External Input: Externally set the cable input
Material: Shell: PC, Detection Department: Acrylic, Bracket: 304 Stainless Steel, Bolt: Carbon Steel
Weight: Approximately 80 g (approximately 14 g)
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
This article introduces the Autonics/Autonics photoelectric sensor BC15-LDT-C response 500μs product, if you are interested in Autonics/Autonics photoelectric sensor, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Autonics Photoelectric Sensor BJP100-BDT BGS Reflective Type
Introduction: The BJP series photoelectric sensors are optimized for printed circuit board (PCB) inspection with a 30 mm x 3 mm rectangular beam and background suppression (BGS) detection method. The sensor can be stably detected without being affected by holes, grooves, incomplete machining or protrusions on the PCB.
|
|
Autotonix/Autonics sensor PSK1-C01CP-R1/8 combined pressure
Introduction: The PSK1 series is a two-stage display pressure sensor that can display both the current value (PV) and the set value (SV). In addition to displaying the setting status, it also provides a power-saving mode and a fine-tuning function to improve the user's convenience.
Give birth...
|
|
Autonics/Autonics photoelectric sensor BJ10M-TDT detects 10m
Introduction: BJ series high-performance photoelectric sensors have excellent anti-interference performance, effectively prevent the influence of external light, and achieve ideal detection performance. Light ON/Dark ON action mode switch and sensitivity adjuster for easy setup (except BJG-DDT). BJ series has a variety of detection modes ...
|
|
Autonics Photoelectric Sensor BH300-DDT 12-24VDC
Introduction: The BH series photoelectric sensors can be front-mounted with M18 fixing nuts and caps, or side-mounted with M3 bolts and nuts. Flexible mounting options allow for easy application in a variety of industrial environments. Sensors can be generated individually or in the same form with a simple wire configuration.
|
|
Autonics Photoelectric Sensor BPS3M-TDT Ultra-Slim
Introduction: Autonics ultra-thin long-distance detection photoelectric sensor BPS series, flat design for easy installation, small size, detection distance up to 3m, to achieve IP67 protection level.
Features:
Flat square ...
|
|
Autonics miniature photoelectric sensor BS5-V2R-P approx. 30g
Description: The BS5 series of miniature photoelectric sensors are available in 8 different form factors (K, T, V, L, Y, F, R, TA) to provide maximum flexibility for a wide range of user applications and installation setups. The sensor is designed to minimize malfunction caused by foreign objects. The sensor has a high visual ...
|
|
Autonics/Autonics BD Series Laser Displacement Sensors
Introduction: BD series laser displacement sensor can measure the thickness, width, horizontal difference, parallax, bending, flatness of the target object by detecting the amount of displacement. Regardless of the target color or material, the sensor provides accurate and stable measurement results. Sensor head and amplifier single ...
|
|
Autonics Displacement Sensor BD-CRS 91g
Introduction: BD-C series communication converter is used for RS232C/RS485 communication of BD series laser displacement sensor. By connecting the sensor amplifier unit with a side connector, the communication converter can be powered. atDisplacement laser displacement sensor software allows users to switch without connecting ...
|
|
Autonics photoelectric sensor BTF1M-TDTL Ø2 mm
Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also adopts IP67 protective structure and stainless steel safety ...
|
|
Autonics Pressure Sensor PSS-V01V-R1/8 weighs 60g
Introduction: PSS series analog pressure sensor is small in size, compact in structure (W11.8 X H29.3 XD24.8mm, including pressure interface), adopts analog voltage/current output, can be directly connected with HMI, PC, PLC, and has a wide rated pressure range, suitable for various working environments.
...
|
|
The Autonics/Autonics photoelectric sensor BA2M-DDT weighs approximately 50 g
Introduction: BA series diffuse reflective photoelectric sensors use specially designed optical components with a detection distance of up to 2 meters. The sensor can be used in both Light ON and Dark ON modes and comes with a built-in sensitivity adjuster. The action/stability indicator light allows the user to easily identify the operating status ...
|
|
Autonics photoelectric sensor BR20M-TDTD Ø15mm
Introduction: Cylindrical (Ø18mm) photoelectric sensor BR series, to achieve long-distance detection (20m), high-speed response time (less than 1ms). Advanced digital signal processing is adopted, and the anti-interference performance is stronger. The BR series has 4 different detection methods, increasing the user's choice of application ...
|
|
Autonics Photoelectric Sensor BUP-30 U-Type Ø4mm
Introduction: Reinforced plastic shell U-shaped photoelectric sensor BUP series, effectively prevent external light interference, improve detection performance, fast response speed (less than 1ms), through the mounting bracket can achieve multi-directional installation, increase the user's choice space.
...
|
|
Autonics photoelectric sensor BRQP400-DDTA is about 60 g
Introduction: Ø18mm cylindrical photoelectric sensor BRQ series products are divided into front and side detection types according to the detection method, and are divided into plastic, metal (brass nickel plated), and SUS316L materials according to the material, which can meet the needs of users in a variety of environments. The maximum detection distance of this product can reach 30m, with ...
|
|
Autonics photoelectric sensor BTF30-DDTD diffuse reflective type
Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also adopts IP67 protective structure and stainless steel safety ...
|
|
Autonics photoelectric sensor BJX10M-TDT-C-P 65g
Introduction: The BJX series of small photoelectric sensors have a high-performance lens with a detection distance of up to 30m. The sensor also has excellent immunity to interference and has little impact on ambient light, allowing for accurate and reliable detection and presence. Anti-mutual interference function allows close proximity to each other.
|
|
Autonics/Autonics photoelectric sensor BTF30-DDTL responds 1ms
Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also adopts IP67 protective structure and stainless steel safety ...
|
|
Autonics BJX3M-PDT-P photoelectric sensor
Product introduction: The BJX series of small photoelectric sensors has a high-performance lens with a detection distance of up to 30 m. The sensor also has excellent immunity to interference and has little impact on ambient light, allowing for accurate and reliable detection and presence. Anti-mutual interference function, allowing ...
|
|
Autonics photoelectric sensor BRQT5M-TDTA-C-P
Introduction: Ø18mm cylindrical photoelectric sensor BRQ series products are divided into front and side detection types according to the detection method, and are divided into plastic, metal (brass nickel plated), and SUS316L materials according to the material, which can meet the needs of users in a variety of environments. The maximum detection distance of this product can reach 30m, with ...
|
|
Autonics/Autonics Pressure Transducer PSS-C01V-R04
Introduction: PSS series analog pressure sensor is small in size, compact in structure (W11.8 X H29.3 XD24.8mm, including pressure interface), adopts analog voltage/current output, can be directly connected with HMI, PC, PLC, and has a wide rated pressure range, suitable for various working environments.
...
|
|
Contact
working hours
