Introduction: BD series laser displacement sensor can measure the thickness, width, horizontal difference, parallax, bending, flatness of the target object by detecting the amount of displacement. Regardless of the target color or material, the sensor provides accurate and stable measurement results. The sensor head and amplifier unit are detachable for easy maintenance, up to 8 sensor amplifier units can be interconnected, and they are protected from mutual interference.
Product parameters
Supply voltage: The power supply of the amplifier unit is used.
Light source: Red diode laser (wavelength: 660nm, IEC 60825-1:2014)
Ambient illumination: 10,000 lx or less for incandescent lamps
Ambient temperature: -10 - 50 °C, storage: -15 - 60 °C
Degree of protection: IP67 (IEC specification, except for connectors for extension cables)
Ambient Humidity:
85%RH or less, when stored: 85%RH or less
Material shell: PC, inspection department: glass, cable: PVC
Weight: Approximately 233 g (Approximately 68 g)
Resolution: 2 μm
Connection: plugging type
Withstand voltage: 1,000VAC 50/60Hz for 1 minute
Action Indicator:
Power Indicator: Red LED, Laser Light Indicator: Green LED,
Measuring range indicator: Green LED
Insulation resistance: 20MΩ or more (based on 500VDC)
Vibration resistance: 10-50Hz (cycle 1 minute) amplitude 1.5mm X, Y, Z direction for 2 hours
Impact resistance: 300 m/s² (about 30G) X, Y, Z 3 times in each direction
Linearity: 0.1% F.S. (in 55 —— 75mm)
Anti-interference: square wave interference generated by the interference simulator (pulse width: 1μs, voltage: ±500V, cycle: 10ms)
Standard distance: 65mm
Maximum measuring range: 50 - 80mm
Light source_Optical method: diffuse reflection
Light source_Laser class: Class 2 (IEC/EN), Class II (FDA(CDRH) CFR Part 1002)
Spot Diameter:
Short range (55mm): approx. 360×1590 μm
Standard distance (65mm): approx. 290×1180 μm
Long range (75 mm): approx. 210×830 μm
Amplifier Unit Compatibility: BD Series Amplifier Unit: 1
Temperature characteristics: 0.06% F.S./°C
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the Autonics/Autonics displacement sensor BD-065 diffuse reflection products, if you are interested in the Autonics/Autonics displacement sensor, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Autonics/Autonics Pressure Sensor PSS-01V-R1/8 Compact
Introduction: PSS series analog pressure sensor is small in size, compact in structure (W11.8 X H29.3 XD24.8mm, including pressure interface), adopts analog voltage/current output, can be directly connected with HMI, PC, PLC, and has a wide rated pressure range, suitable for various working environments.
...
|
|
Autonics Photoelectric Sensor BJR3M-PDT Red LED
Introduction: The BJR series is an oil-resistant/oil-proof photoelectric sensor, which is suitable for various environments such as cutting oil and lubricating oil, such as the automotive and machine tool industries. The maximum detection distance is up to 15 m (through-beam type), and various functions such as M.S.R (mirror suppression) and anti-mutual interference are available to achieve stable and error-free ...
|
|
Autonics level detection sensor BL13-TDT through-beam type
Introduction: BL series liquid level detection sensor can detect liquid level through transparent/translucent tubes with an outer diameter of Ø6-13mm and a thickness of 1mm. The Light ON/Dark ON action mode can be selected by pressing the button, and the LED indicator (red/green) on the back of the product can be used to easily confirm the product.
|
|
Autonics Sensor BD-030 30mm pluggable type
Introduction: BD series laser displacement sensor can measure the thickness, width, horizontal difference, parallax, bending, flatness of the target object by detecting the amount of displacement. Regardless of the target color or material, the sensor provides accurate and stable measurement results. Sensor head and amplifier unit ...
|
|
Autonics/Autonics BD Series Laser Displacement Sensors
Introduction: BD series laser displacement sensor can measure the thickness, width, horizontal difference, parallax, bending, flatness of the target object by detecting the amount of displacement. Regardless of the target color or material, the sensor provides accurate and stable measurement results. Sensor head and amplifier single ...
|
|
Autonics Photoelectric Sensor BTF15-BDTD BGS Reflective Type
Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also adopts IP67 protective structure and stainless steel safety ...
|
|
Autonics displacement sensor BD-100 approx. 233g
Introduction: BD series laser displacement sensor can measure the thickness, width, horizontal difference, parallax, bending, flatness of the target object by detecting the amount of displacement. Regardless of the target color or material, the sensor provides accurate and stable measurement results. Sensor head and amplifier unit ...
|
|
Autonics miniature photoelectric sensor BS5-P1MD 50g
Introduction: Regardless of the material, color or reflectivity of the target object, the BS5-P series pushbutton photoelectric sensors are capable of precise detection. Optical inspection with push-button operation ensures a higher mechanical life than traditional mechanical switches, up to 5 million operations. Contains 4 ...
|
|
Autonics Photoelectric Sensor BS5-P1ML Pushbutton Type
Introduction: Regardless of the material, color or reflectivity of the target object, the BS5-P series pushbutton photoelectric sensors are capable of precise detection. Optical inspection with push-button operation ensures a higher mechanical life than traditional mechanical switches, up to 5 million operations. Contains 4 ...
|
|
Autonics/Autonics Pressure Transducer PSS-C01V-R04
Introduction: PSS series analog pressure sensor is small in size, compact in structure (W11.8 X H29.3 XD24.8mm, including pressure interface), adopts analog voltage/current output, can be directly connected with HMI, PC, PLC, and has a wide rated pressure range, suitable for various working environments.
...
|
|
Autonics BUP-30 U-shaped photoelectric sensor
BUP Series: The U-shaped photoelectric sensor BUP series is available in 30 mm and 50 mm sensing distance models with adjustable sensitivity, extending the flexibility of various applications.
Details:
Detection Type: Thru-beam type
Detection channel: 1 channel
Detection distance: 30mm
Detect: Opaque object Min ...
|
|
The Autonics photoelectric sensor BJ10M-TDT-C weighs 20g
Introduction: The BJ series of multi-functional photoelectric sensors uses high-performance lenses to achieve long-distance detection, excellent anti-interference characteristics and external light reduction functions, and achieve the world's highest detection performance. There is also a built-in anti-mutual interference function for tight installation, compact design, ...
|
|
Autonics photoelectric sensor BJ300-DDT weighs about 45g
Introduction: BJ series high-performance photoelectric sensors have excellent anti-interference performance, effectively prevent the influence of external light, and achieve ideal detection performance. Light ON/Dark ON action mode switch and sensitivity adjuster for easy setup (except BJG-DDT). BJ series has a variety of detection modes ...
|
|
Autonics Pressure Sensor PSS-V01V-R1/8 weighs 60g
Introduction: PSS series analog pressure sensor is small in size, compact in structure (W11.8 X H29.3 XD24.8mm, including pressure interface), adopts analog voltage/current output, can be directly connected with HMI, PC, PLC, and has a wide rated pressure range, suitable for various working environments.
...
|
|
Autonics pressure sensor PSK1-C1C-R1/8 approx. 62 g
Introduction: Autonicx/Autonics PSK1 series two-stage display pressure transducers that display both the current value (PV) and the set value (SV). In addition to displaying the setting status, it also provides a power-saving mode and a fine-tuning function to improve the user's convenience.
...
|
|
Autonics photoelectric sensor BR20M-TDTD Ø15mm
Introduction: Cylindrical (Ø18mm) photoelectric sensor BR series, to achieve long-distance detection (20m), high-speed response time (less than 1ms). Advanced digital signal processing is adopted, and the anti-interference performance is stronger. The BR series has 4 different detection methods, increasing the user's choice of application ...
|
|
Autonics/Autonics Photoelectric Sensor BYD100-DDT Infrared LED
Introduction: The BYD series of small amplifier built-in photoelectric sensors are extremely cost-effective, and their compact size and various detection methods (through-beam, diffuse, and limited distance reflection) make them ideal for a wide range of user applications. In addition, BYD30-DDT-you and BYD50-DDT-U...
|
|
Autonics photoelectric sensor BRQP400-DDTA is about 60 g
Introduction: Ø18mm cylindrical photoelectric sensor BRQ series products are divided into front and side detection types according to the detection method, and are divided into plastic, metal (brass nickel plated), and SUS316L materials according to the material, which can meet the needs of users in a variety of environments. The maximum detection distance of this product can reach 30m, with ...
|
|
Autonics U-type photoelectric sensor BUM4-40D-W-4M
Introduction: BUM series U-shaped photoelectric sensor has 4 independent outputs, high-speed response time of less than 1ms, which can be used for highly reliable and stable state detection. Each output channel can be controlled independently and can be set up as multiple sensors. The BUM series offers excellent performance in moving parts inspection, ...
|
|
Autonics/Autonics photoelectric sensor BJX3M-PDT-P detects 3m
Description: The BJX series of small photoelectric sensors has a high-performance lens with a detection distance of up to 30 m. The sensor also has excellent immunity to interference and has little impact on ambient light, allowing for accurate and reliable detection and presence. Anti-mutual interference function, allowing close ...
|
|
Contact
working hours
