The driving mode of the knife gate valve - Wuzhong instrument

The process of shell experiments and seal experiments done by turbine fixed ball valves in some artificial environments is as follows. Double blocking and discharge function of turbine fixed ball valve: the turbine ball valve is fixed by using tension spring preload floating valve seat, when the valve is in two different states, fully open and fully closed, the fluid is ...

The process of shell experiments and seal experiments done by turbine fixed ball valves in some artificial environments is as follows. 1. The double blocking and discharge function of the turbine fixed ball valve: the turbine ball valve is fixed by using the tension spring preload floating valve seat, when the valve is in two different states of full open and fully closed, the flow ...

1. According to the requirements of different flow characteristics, the electric sleeve control valve can be easily replaced with a linear flow characteristic sleeve or an equal percentage of flow characteristic sleeve, and can replace the sleeve with different flow capacity according to the different requirements of flow size. 2. Electric sleeve simple control valve in high temperature ...

Load the organization The role of the loading tissue is to apply a downward loading force from the top of the pressure reducing valve. The loading structure of the FITOK pressure reducing valve is mainly the loading of tension springs. Tension spring loading has the advantage of reliability and low cost, and is the most versatile loading device in pressure reducing valves.

　　First, the effect of pipeline identification Why do you need to do pipeline identification? Intent: To facilitate the identification of substances in industrial pipelines, ensure safe production, and avoid misjudgment in operation and equipment maintenance. Carry out ...

The mechanical deflection angle of the movable part of the surface can be measured and converted, and the size to be measured is directly indicated by the indicator, so it is also called the direct-reading appearance. According to the working principle, the indication appearance can be divided into magnetoelectric ...

In the process of use, several problems are usually presented in the direction of (FO, FC, FL), and the "fault" in the valve fault closing/obstacle opening refers to: the action of the valve when the gas source is gone. For the fault location of pneumatic valves, it is mainly divided into several situations: ...

(1) The sealing pair is spherical, disc eccentricity rotation planning The valve sealing pair is spherical planning, and the sealing effect is good. Together with the disc rotation center is planned to have a bias with the center of the valve seat, so the valve disc and the valve seat form a bias cam wedge sealing effect when closed, the valve ...

The flow rate and velocity of the valve mainly depend on the diameter of the valve, and are also related to the resistance of the structure of the valve to the medium, and at the same time have an intrinsic relationship with the pressure, temperature and concentration of the medium of the valve. Two...

Wuzhong is a leading enterprise in China's process industry automatic control valve industry, founded in 1959, a national third-line construction enterprise. The company has always adhered to the concept of professionalism, dedication, innovation and transcendence.

Valve is a kind of commonly used hardware products, the valve in the assembly and installation process also has a certain skill requirements, otherwise the assembled valve may not show its own excellent performance, what are the skill requirements of the valve in the assembly process? ...

1. Before the equipment, you should carefully read the operation manual of the product, check whether the product can fully meet the application needs, understand the key to the equipment, and prepare for the operation. 2. Check whether the parameters marked on the nameplate can be the parameters of the selected product and whether they can be consistent with the instructions. 3. Acceptance ...

1. The valve core is pressure balanced, even if the large-diameter valve is under the high pressure drop parts, it can also be operated with a smaller actuator. 2. The inner cavity of the valve is straight-through streamlined, which greatly reduces the activity resistance. 3. The concentric movement method of the valve core and the valve body is greatly ...

The actuator of the control valve has pneumatic type, electric type and electro-hydraulic linkage type, and the pneumatic equipment is divided into barrier type and cylinder type. Depending on the action when the operating signal and the drive source disappear, the actuator has a forward type, a reverse type, a non-directional type, and a persistent type. The positive type is used in the operation signal and drive ...

(1) Under normal circumstances, the valve is not tested for strength, but after repair, the valve body and bonnet or the valve body and bonnet damaged by corrosion should be tested for strength. For safety valves, their constant pressure and return pressure and other experiments should be in accordance with their instructions and the rules of the relevant procedures. ...

First, there is a leak in the safety valve. The industry said that when there is a small leakage in the safety valve, it is generally not easy to find, but even a small leakage point will expand in the erosion. The test method is to test ...

Classified by role and use (1) Shut-off valve: The shut-off valve, also known as the closed-circuit valve, has the effect of turning on or cutting off the medium in the pipeline. Shut-off valves include gate valves, globe valves, plug valves, ball valves, butterfly valves and diaphragms. (2) Check valve: Check valve is also known as check valve or check valve.

1. The corrosion of the valve is usually understood as the damage to the metal material of the valve under the chemical or electrochemical environmental effect. Because the corrosion phenomenon is presented in the spontaneous interaction between the metal and the surrounding environment, therefore, how to isolate the metal from the surrounding environment or more use non-...

Valve application requirements (1) General gate valves, ball valves, and globe valves are prohibited from regulating according to their structural characteristics. However, in process design, it is widely used for mediation. Due to the conditioning application, the valve seal is in a throttling state for a long time, and the impurities in the oil wash the seal, damaging the seal.

1. The safety valve should have the equipment to prevent the hammer from moving by itself and the guide frame to restrain the lever from deviating, and the tension spring safety valve should have the equipment to improve the handle and prevent the adjustment screws from being twisted at will. 2. It should be installed straight in the pot merchant, the container ...