XINJE/XINJE XC Series SD Card Expansion BD Board 2MΩ 500V DC

Product introduction: flat appearance structure design, convenient wiring, saving installation space; Support gantry synchronization to achieve dual-axis precise synchronization; Support Modbus RTU, EtherCAT (under development, stay tuned), CANopen (under development, stay tuned) multiple communication protocols; Built-in ...

Introduction: XL5E series basic unit Ethernet thin PLC, small and practical, saving installation space; Support 2-6 high-speed pulse output (T-type support), 3-6 AB phase high-speed counting. Support X-NET fieldbus, PID, external interrupt, C function block, MODBUS communication, etc.

Introduction: XC5 series enhanced PLC, including 24, 32 point specifications. It has all the functions of the XC3 series and can meet the various needs of users. Support external expansion module and external expansion BD board. Products...

Introduction: ZG3/ZGM series all-in-one special expansion BD board supports 1-channel RS232 or 1-channel RS485 communication, supports 10-bit analog output, current mode; Mounted directly on the back of the integral controller, it does not take up extra space. Give birth...

Introduction: XD3 series special model, set logic control, thermocouple input in one. The switching input is 8 points (NPN type optocoupler isolation), and the switching output is 14 points (transistor type). The thermocouple signal input is 4 points, which is cost-effective and saves space. ...

Introduction: XL series PLC adapts to analog input and output right expansion module, including 4-point input and 2-point output specifications. XL series PLCs can generally be expanded with 10-16 modules. Product Details XL Series PLC Adaptation Analog Input ...

Introduction: XD5 series differential model PLC, support differential input and output signals. Up to 12 times faster than the XC series, with more internal resource space. It supports special functions such as high-speed counting (up to 80KHz), 4-axis pulse output (up to 100KHz), frequency measurement, etc. ...

Introduction: XINJE/XINJE VH3 series inverter non-inductive vector control, which can smoothly drive large loads at low frequency; The output frequency is 500Hz, which can control high-speed motors. Using SMT full patch production and conformal coating treatment process, the product performance is stable. ...

Introduction: DM5F-2A servo drive flat appearance structure design, convenient wiring, saving installation space; Support gantry synchronization to achieve dual-axis precise synchronization; Support Modbus RTU, EtherCAT, CANopen communication protocols; Built-in electronic cam, dual-axis simultaneous interpolation function, ...

Introduction: CCSG-MT/UT/ET universal touch screen has passed the certification of 16.77 million colors by classification society - the picture quality is delicate and traceless, and the display effect is comparable to that of LCD display. Support C language scripting function, operation, free protocol writing, drawing, improve the degree of programming freedom. With data collection and saving function, support ...

Introduction: A2000 axial flow control valve is a pressure balanced sleeve control valve. The valve can be widely used in natural gas, petrochemical and other occasions that require small pressure drop loss, large flow rate, good dynamic stability, low noise and low cavitation corrosion. ...

Introduction: Xinjie XD series PLC adaptation analog right expansion module; XD series PLC can generally be expanded with 10-16 modules; 16 (14) bits of high-precision analog input, 10 bits of high-precision analog output. Product Details ...

Introduction: XINJE/XINJE XG series PLC adapts to the right expansion module of switching input and output, including 8-64 point specifications. The XG series PLC can generally be expanded with 16 modules. Features: XG Series PLC Adaptation Switching Input ...

Introduction: XINJE/XINJE Servo Driver DF3E Non-Brake Version: 4 DI Inputs/3 DO Outputs; Brake type: 3 DI inputs/3 DO outputs. Input Patterns: Pulse + Direction, AB Phase Pulse, CW/CCW Signal. Features: Input frequency: open collector 200kp...

Introduction: XC2 series basic PLC, including 14, 16, 24, 32, 42, 48, 60 point specifications. It has general data processing functions and can meet the needs of most occasions. Expansion modules are not supported, and external expansion BD boards are supported (except for 14, 16, and 42 points). ...

Introduction: Non-inductive vector control, which can smoothly drive large loads at low frequency; The output frequency is up to 500Hz, and it can control high-speed motors. 　　peculiarity Inductive vector control can smoothly drive large loads at low frequencies The output frequency is up to 500Hz, and it can control high-speed motors ...

Introduction: XINJE/XINJE inverter VH3 series 0.75-30KW, non-inductive vector control, can smoothly drive large loads at low frequency; The output frequency is up to 500Hz, and it can control high-speed motors. Features: Inductive ...

Introduction: XC3 series standard PLC, including 14, 24, 32, 42, 48, 60 point specifications. It has complete functions and can meet the various needs of users. It supports external expansion modules (except 14 points) and external expansion BD boards (except 14 and 42 points). ...

Introduction: The new control algorithm, the drive performance is significantly improved, and the medium and high-speed torque is increased by 10%-50% compared with the original product; The motor runs more smoothly and the vibration degree is reduced, which can reduce the temperature rise of the motor by about 10%. 　　peculiarity Optimized appearance, saving installation space Brand new ...

Introduction: XINJEXCM series sports PLC, including 60 points specification. It has all the functions of the XC3 series and can meet the various needs of users. External expansion modules are not supported, but BD boards can be connected externally. ...