Introduction: DM5F-2A servo drive flat appearance structure design, convenient wiring, saving installation space; Support gantry synchronization to achieve dual-axis precise synchronization; Support Modbus RTU, EtherCAT, CANopen communication protocols; Built-in electronic cam and dual-axis simultaneous interpolation function, more accurate positioning and faster response; Support position, speed, torque mode, multi-mode seamless switching.
Product Details
Three control modes, seamless switching: position control, speed control, torque control
6 SI inputs, 6 SO outputs
Input Patterns: Pulse + Direction, AB Phase Pulse, CW/CCW Signal
Input frequency: 200kpps open collector, 500kpps differential
Interface circuits: collector (+24V level), differential (+5V level)
Communication port: RS232, RS485 standard
Power range: 0.4-0.75KW
Input power: single-phase AC200-240V; Three-phase AC200 - 240V, use 50/60Hz;
Encoder feedback: 17Bit/23Bit communication encoder
Control mode: three-phase full-wave rectification IPM PWM control, sine wave current driving mode
Ambient temperature
Operating: -10 – +40°C (non-condensing)
Storage: −20 to +60°C (no condensation)
Ambient humidity
Run/Storage: 90% RH or less (no condensation)
Vibration/shock resistance: 4.9m/s2/ 19.6m/s2
function
Protection functions: overvoltage, undervoltage, overheating, overcurrent, overload, overspeed, analog input abnormality, excessive position deviation, output short circuit, encoder abnormality, regeneration abnormality protection, overtravel protection, oscillation protection, operation disconnection protection, etc
Dynamic brake: None
Communication function: RS232/RS485: standard MODBUS RTU protocol
Braking resistor: built-in braking resistor, external braking resistor
Display and operation: 5-digit LED indicator, power indicator, 2 running indicators, 4 button operation
Load fluctuation rate: 0-100% load: ±0.01% or less (at rated speed)
Voltage fluctuation rate: Rated voltage±10%: 0.01% (at rated speed)
Temperature fluctuation rate: 20±25°C: ±0.1% or less (at rated speed)
Input and output signal: position output, output form: ABZ phase 5V differential
Crossover Function: Yes
Collector Z-phase output: Yes
Analog Input: None
Digital inputs: 6 SI inputs
Servo Enable, Alarm Clear, Forward Rotation Prohibited, Reverse Rotation Disabled, Torque Limit Selection, Internal Speed Selection, Gear Ratio Switching, Mode Switching, Pulse Input Disabled, Zero-Speed Locking, Position Deviation Clearing, Internal Position Changing Signal, Internal Control Mode Direction Switching
Digital output: 6 SO inputs
Positioning Complete, Servo Ready, Alarm Output, Torque Limit Output, Same Speed Detection, Rotation Detection, Speed Arrival, Brake Release Output, Warning Output
Position control mode
Maximum input pulse frequency
Open collector: 200kpps
Differential: 500kpps
Pulse command mode: 3.3-5V, 18-24V pulse + direction, AB phase pulse, CW/CCW signal can be accepted
Control mode: external pulse/built-in position
Feedforward compensation: 0-100% (set resolution to 1%)
Positioning completion width setting: 0 - 65535 instruction units (set resolution to 1 instruction unit)
Electronic gear ratio: 1/10000≤B/A≤10000
Speed control mode
Control mode: internal three-speed mode, external speed mode
Command smoothing mode: low-pass filter, smoothing filter
Torque Limit: Internal parameter
Speed change rate: when the rated change of external load is 0-100% load: ±0.01% or less (at rated speed)
Rated voltage±10%: 0.01% (at rated speed)
Ambient temperature 20±25°C: ±0.1% or less (at rated speed)
Torque control mode
Control mode: internal torque
Command smoothing mode: low-pass filter, smoothing filter
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
This article introduces the Xinjie/XINJE servo drive DM5F-2A 0.4-0.75KW products, if you are interested in Xinjie/XINJE servo drive, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
XINJE/XINJE XL Series AD/DA Expansion Module DC24V±10%
Introduction: XL series PLC adapts to analog input and output right expansion module, including 4-point input and 2-point output specifications. XL series PLCs can generally be expanded with 10-16 modules.
Product Details
XL Series PLC Adaptation Analog Input ...
|
|
Xinjie/XINJE integral controller XP-4AD-BD resolution 0.15mV
Introduction: XP-18, XMP2-32 series integral controller special expansion BD board; Support 14bit analog voltage input, 0-10V, 0-5V; Support PT100 platinum thermal resistance (2-wire system) input, accuracy 0.1°C, support 10bit analog voltage output, 0-10V, 0-5V...
|
|
XINJE touch screen TGM series memory 128MB
Introduction: TGM series network touch screen new ultra-thin design, with a variety of download methods (Ethernet, USB port, U disk import); With the penetration function, the SS.J.D/XL/XG series PLC program can be downloaded/downloaded through the touch screen. 16.77 million colors, delicate and traceless picture quality, display effect ...
|
|
Xinjie/XINJE inverter VH3 series 0.5KHz-16KHz
Introduction: XINJE/XINJE VH3 series inverter non-inductive vector control, which can smoothly drive large loads at low frequency; The output frequency is 500Hz, which can control high-speed motors. Using SMT full patch production and conformal coating treatment process, the product performance is stable.
...
|
|
XINJE touch screen TGA63-NT 10.1 inch LED backlight
Introduction: TG-NT bus communication touch screen X-NET bus function special model 16.77 million colors, delicate picture quality without traces, display effect comparable to LCD display. Download, start, run, trinity of ultra-high-speed response; Support C language scripting function, arithmetic, free protocol writing, drawing ...
|
|
XINJE/XINJE HMI TGMA63D-ET Ultra-thin metal with wide temperature
Introduction: The new structural design and new color matching of the Xinjie TGMA63D-ET machine is a metal shell, which has the outstanding advantages of ultra-thin body, centralized interface and wide temperature operation. In addition, it also has USB-A, USB-B, RS232, RS485 interfaces, which can flexibly realize the download of programs, ...
|
|
XINJE/XINJE OP Series Text Display 3.7 inches
Introduction: A2000 axial flow control valve is a pressure balanced sleeve control valve. The valve can be widely used in natural gas, petrochemical and other occasions that require small pressure drop loss, large flow rate, good dynamic stability, low noise and low cavitation corrosion.
...
|
|
XINJE touch screen TE765-MT/UT/ET 7" LED backlight
Introduction: TE765-MT/UT/ET touch screen 16.77 million colors - delicate picture quality, touch screen display effect comparable to LCD monitor, support C language script function, operation, free protocol writing, drawing, improve programming freedom.
Give birth...
|
|
XINJE/XINJE low-voltage inverter VH3-40P7 0.75KW
Introduction: XINJE/XINJE inverter VH3 series 0.75-30KW, non-inductive vector control, can smoothly drive large loads at low frequency; The output frequency is up to 500Hz, and it can control high-speed motors.
Features:
Inductive ...
|
|
XINJE standard PLC XC3 series user program capacity 128KB
Introduction: XC3 series standard PLC, including 14, 24, 32, 42, 48, 60 point specifications. It has complete functions and can meet the various needs of users. It supports external expansion modules (except 14 points) and external expansion BD boards (except 14 and 42 points).
...
|
|
XINJE/XINJE Ethernet Thin PLC XL5E Series DC 500V
Introduction: XL5E series basic unit Ethernet thin PLC, small and practical, saving installation space; Support 2-6 high-speed pulse output (T-type support), 3-6 AB phase high-speed counting. Support X-NET fieldbus, PID, external interrupt, C function block, MODBUS communication, etc.
|
|
XINJE/XINJE PLC expansion module XD-E3AD4PT2DA DC24V
Introduction: Xinjie XD series PLC adaptation analog right expansion module; XD series PLC can generally be expanded with 10-16 modules; 16 (14) bits of high-precision analog input, 10 bits of high-precision analog output.
Product Details
...
|
|
XINJE/XINJE integral controller ZG series Vibration resistance 10~25Hz
Introduction: ZG series integral controller integrates PLC and HMI functions (TG touch screen & XD series PLC); Switching input: 16 or 10 points, optocoupler isolation; Switching output: 14 or 10 points, transistor output/relay output/transistor relay hybrid output.
...
|
|
XINJE Standard PLC XC3 Series DC500V 128KB
Introduction: XC3 series standard PLC, including 14, 24, 32, 42, 48, 60 point specifications. It has complete functions and can meet the various needs of users. It supports external expansion modules (except 14 points) and external expansion BD boards (except 14 and 42 points).
...
|
|
XINJE PLC XD3-22T4TC-E switch input 8 points
Introduction: XD3 series special model, set logic control, thermocouple input in one. The switching input is 8 points (NPN type optocoupler isolation), and the switching output is 14 points (transistor type). The thermocouple signal input is 4 points, which is cost-effective and saves space.
...
|
|
The XINJE/XINJE servo drive DS3L-PFA has a built-in braking resistor
Introduction: XINJE/XINJE servo drive DS3L-PFA contains the most intelligent control system, which can significantly resist external disturbances, improve system rigidity, and shorten the positioning time (the positioning time is about 1/2 of the company's previous products). Smoother and faster speed response: DS3 has a built-in state observer, ...
|
|
XINJE MA Series Temperature Module 6PT-P DC24V±10%
Introduction: Xinjie MA series module adopts RS485 communication port, based on the standard Modbus communication protocol, which has wide use significance. Its models include input and output modules, analog input modules, analog output modules, etc., so that PLC, touch screen, all-in-one machine and other phases that support Modbus protocol ...
|
|
XINJE/XINJE DP3F series closed-loop stepper driver The maximum voltage is 80VDC
Introduction: Closed-loop control technology, using encoder as position feedback, can compensate for position deviation in real time, and fundamentally solve the problem of missing steps of traditional stepper motors. The current size can be adjusted in real time according to the load and speed, the operation is more stable, and the motor heats up less.
peculiarity
...
|
|
Xinjie/XINJE temperature module MA series conversion speed 20ms
Introduction: Xinjie MA series module adopts RS485 communication port, based on the standard Modbus communication protocol, which has wide use significance. Its models include input and output modules, analog input modules, analog output modules, etc., so that PLC, touch screen, all-in-one machine and other phases that support Modbus protocol ...
|
|
XINJE/XINJE PLC XD-E4DA 2ms/1 channel
Introduction: XINJE/XINJE PLC XD-E4DA 4-channel analog output: you can choose two modes of voltage output and current output, of which the voltage output is 0-5V, 0-10V, and the current output is 0-20mA, 4-20mA.
...
|
|
Contact
working hours
