IDEC/Izumi HE2B Enabling Switch HE2B-M222

Create Date: 2024-8-30 12:03:23|Source: IDEC/Izumi

Previous
Next
Brand:
IDEC/Izumi

Origin:
Japan

Price:
Please contact customer service

Delivery time:
Please contact customer service

Model:
HE2B-M222

Product Introduction
Even at the end of the operation button, a clear and stable sense of operation is achieved.

quality assurance

Attentive service

Secure transactions

Product Description

Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.

Position 2 ⇒ 3 requires force and a clear sense of operation.

Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1 (2005): 10.9 items, IEC60947-5-8 (2006): 7.1.9 items, reduce the operating force of position 2 and enable long-term operation.

IDEC/Izumi HE2B Enabling Switch HE2B-M222

Even at the end of the operation button, a clear and stable sense of operation is achieved.

When OFF (position 1) is released, the ON state structure is not formed. （IEC60204-1 ； 9.2.5.8, IEC60947-5-8; 7.1.9), the auxiliary switch can distinguish between OFF (position 1) in the reset state of the button and OFF (position 3) in the pressing state. (The auxiliary switch has a direct open-circuit operation function) and has a built-in 2-contact that supports loop redundancy. (3 position switches, 2 contacts + push buttons, reset auxiliary switches, 2 contacts + push buttons, auxiliary switches, 2 contacts, maximum 6 contacts).

Waterproof structure (IP65) with rubber sleeve.

Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.

This article introduces IDEC/Hequan HE2B Enabling Switch HE2B-M222 products, if you are interested in IDEC/Hequan, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.

More on that

	IDEC/Izumi HS1C-K Solenoid Safety Switch HS1C-K244R-G-T012 During mechanical operation, the guards/keys are securely locked. Remove the key to unlock the safety gate, and keep the load circuit and auxiliary circuit open. Ideal for applications where the key needs to be taken into a hazardous location to avoid accidental start-up of the device. Key interlock type ...
	IDEC/Izumi HE2B Enabling Switch HE2B-M222PN1 Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance. Position 2 ⇒ 3 requires force and a clear sense of operation. Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...
	IDEC/Izumi HE1G-L Handheld Enabling Switch HE1G-L21SM 3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. (IEC60204-1:2005, 10.9 terms, IEC60947-5-8:2007, 7.1.9 terms),
	IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-R44KMSRM-G Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
	IDEC/Izumi HS1L Solenoid Safety Switch HS1L-DT44KMSRP-R Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
	IDEC/Izumi HS5D Safety Switch HS5D-12RNP It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off. It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...
	IDEC/Izumi HS1C-K Solenoid Safety Switch HS1C-K244R-G-T005 During mechanical operation, the guards/keys are securely locked. Remove the key to unlock the safety gate, and keep the load circuit and auxiliary circuit open. Ideal for applications where the key needs to be taken into a hazardous location to avoid accidental start-up of the device. Key interlock type ...
	IDEC/Izumi HE1G-L Handheld Enabling Switch HE1G-L21SMC-1N 3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. (IEC60204-1:2005, 10.9 terms, IEC60947-5-8:2007, 7.1.9 terms),
	IDEC/Izumi HS5E-KVA0L03-2B Safety switch with keylock VA circuit, key removal for unlock position, 3m cable, rear unlock button Mechanical Specifications: Product Category Safety Interlocks Key Removal Position Removed in the unlocked position Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length 3 meters Our customer-centric ...
	IDEC/Izumi HS6E Submersible Locking HS6E-L7Y4B01-G Safety Switch Solenoid Lock The world's thinnest solenoid interlock switch is 15mm wide Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions Energy saving - 24V DC/110 mA Three sides can be manually unlocked The LED indicator shows solenoid valve operation Standard 3m cable (available on request)
	IDEC/Izumi HS1L Electromagnetic Safety Switch HS1L-R44KMSR-R Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
	IDEC/Izumi Safety Interlock HS6B Subminiature Switch The HS6B is the smallest three-contact enable switch on the market today and can be installed in even the tightest areas, so you can be sure of safety in every necessary location. The design consists of a total of 3 contacts, a double load contact and a monitoring contact (according to ISO13849-1, EN954-1 ...
	IDEC/Izumi HS6B Subminiature HS6B-03B05 Safety Interlock Switch 3NC IDEC/Izumi HS6B Subminiature HS6B-03B05 Safety Interlock Switch 3NC 3NC Contact, 3m Cable 30x15x78mm enclosure One-piece cables reduce wiring time IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage) Direct door opening action: ...
	IDEC/Izumi HS3A Non-Contact Safety Switch HS3A-H21M4 The non-contact safety switch with RFID technology improves the safety performance. Built-in safety features make the construction of a safety system independent of the combination with specific modules. Thanks to the RFID method, there is no error even if the door closes slowly. Even when installed on swing doors, sliding ...
	IDEC/Izumi HW Series Rocker Switch HW1M-2222-22N9 It adopts a key selector switch with direct open-circuit action function and a high-security pin lock structure. Key features: The direct open-circuit action function does block the NC contacts. It is possible to easily build a system that ensures safety by switching modes, etc. In combination with the HS5E-K key-locking safety switch, ...
	IDEC/Izumi HS5D Safety Switch HS5D-12ZRNP It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off. It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...
	IDEC/Izumi HS6E Submersible Locking HS6E-P44B03-G Safety Switch Spring Lock Key features: The world's thinnest solenoid interlock switch is 15mm wide Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions Energy saving - 24V DC/110 mA Three sides can be manually unlocked The LED indicator shows solenoid valve operation Standard 3m cable (can be ...
	IDEC/Izumi HS6B Subminiature HS6B-11B05 Safety Interlock Switch 1NC1NO IDEC/Izumi HS6B Subminiature HS6B-11B05 Safety Interlock Switch 1NC1NO 1NC 1NO Contact, 3m Cable 30x15x78mm enclosure One-piece cables reduce wiring time IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage) Open directly ...
	IDEC/Izumi HE2B enabling switch Multi-contact 3 position switch for large teach pendants. (max. 6 contacts) Key features: Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance. Position 2 ⇒ 3 requires force and a clear sense of operation. Press OFF (position 3) → ...
	IDEC/Izumi HS1L Type Electromagnetic Safety Switch HS1L-DT7Y4KMSRM-R Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.