IDEC/Izumi Safety Interlock HS6B Subminiature Switch

It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off. It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...

It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off. It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...

IDEC/Izumi HS6B Subminiature HS6B-03B01 Safety Interlock Switch 3NC 3NC Contact, 1m Cable 30x15x78mm enclosure One-piece cables reduce wiring time IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage) Direct door opening action ...

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

It has a metal frame with high impact resistance. A 2-step operation to prevent malfunction. The rear lever can be unlocked from the inside of the safety barrier, ensuring that in the event of a danger, the padlock is equipped with a lock to prevent unintentional start-up. Sliding door double door, left door / right door ...

Small size (external dimensions: 7mm× 16mm×51mm). Simple alignment during installation. Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type). IP67 protection structure. Contact structure 1NC+1NO Our customer-centric service concept: ...

By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored. Ideal for installation on protective doors where positioning is difficult. With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.

Small size (external dimensions: 7mm× 16mm×51mm). Simple alignment during installation. Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type). IP67 protection structure. Mechanical Specifications: Contact structure 2NO Functional Specifications: The detection distance is 10m ...

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

Most safety interlocks on the market typically have up to 6 contacts, which exceeds the requirements of many applications. The revised EN ISO 14119 standard requires two interlocking devices to achieve PLe when using Class 2 interlocked devices. For one of the two interlocks, the 2 contacts ...

IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VF7Y4ZSM-G 4 contacts 3NC and 1NC, solenoid lock, side wires 5000N locking force is the smallest in the industry Spring-loaded terminals prevent loose wires Energy saving 200mA solenoid consumption Electromagnetic lock and snaplock models are available ...

During mechanical operation, the guards/keys are securely locked. Remove the key to unlock the safety gate, and keep the load circuit and auxiliary circuit open. Ideal for applications where the key needs to be taken into a hazardous location to avoid accidental start-up of the device. Key interlock type ...

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

VD circuit, unplug the key at the LOCK position, key 502, 3m cable Mechanical Specifications: Product Category Safety Interlocks Key Removal Position Removed in the locked position Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length 3 meters Our customer-centric ...

2 Contacts, 1NC Gate, 1NC Monitor, Monitor Circuit, Spring Lock Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: EN ISO14119 GS ...

Small size (external dimensions: 7mm× 16mm×51mm). Simple alignment during installation. Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type). IP67 protection structure. Mechanical Specifications: Contact structure 2NO Functional Specifications: Yes or no indicator Yes ...

It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off. It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...

Small size (external dimensions: 7mm× 16mm×51mm). Simple alignment during installation. Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type). IP67 protection structure. Mechanical Specifications: Contact structure 2NO Functional Specifications: The detection distance is 10m ...

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

IDEC/Izumi Safety Interlock HS5L Micro Lock HS9Z-DH5LH Door Handle Actuator (Left.) Doorknob Actuator Handle Unit, Left Hand Door Product Category: Door Handle Actuators The company has always been customer-centric, the concept of creating value for customers, winning the market with quality and service, ...