IDEC/Izumi HE1G-L Handheld Enabling Switch HE1G-L21SM

Create Date: 2024-8-30 12:03:23|Source: IDEC/Izumi

Previous
Next
Brand:
IDEC/Izumi

Origin:
Japan

Price:
Please contact customer service

Delivery time:
Please contact customer service

Model:
HE1G-L21SM

Product Introduction
The wiring method can be selected as a screw terminal table type or an internal connector type.

quality assurance

Attentive service

Secure transactions

Product Description

3 position action of OFF ⇒ ON ⇒ OFF to avoid danger.

IDEC/Izumi HE1G-L Handheld Enabling Switch HE1G-L21SM

By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state.

(IEC60204-1:2005, item 10.9, IEC60947-5-8:2007, item 7.1.9), built-in 2-contact 3-position switch realizes a safer dual structure.

The auxiliary switch has a direct open-circuit function. , the action of switching from position 1 to position 2 and position 2 to position 3 is clearly confirmed by pressing the pressure sense.

By reducing the load on hand handling, the burden on the user during long-term use is reduced.

The wiring method can be selected as a screw terminal table type or an internal connector type.

There are also types with emergency stop switch and type with instantaneous pushbutton switch. to achieve IP66 waterproof level. (HE1G-L21SM only), corresponding to the ANSI robot standard.

Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.

This article introduces IDEC/Hequan HE1G-L Hand-held Enabling Switch HE1G-L21SM products, if you are interested in IDEC/Hequan, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.

More on that

	IDEC/Izumi HS5E-KVA0L05-2C501 Safety switch with key lock VA circuit, LOCK position key removal, key 501,5m cable, rear unlock button Mechanical Specifications: Product Category Safety Interlocks Key Removal Position Removed in the locked position Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length: 5 meters We take the guest ...
	IDEC/Hequan Safety Interlock HS5L-XG7Y4M-G Interlock 2 CNT Solenoid Lock 2 contacts, 1NC 1NO access control monitoring circuit, electromagnetic lock Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: EN ISO14119 GS-ET-19（ ...
	IDEC/Izumi HS1C-K Solenoid Safety Switch HS1C-K244R-G-T025 During mechanical operation, the guards/keys are securely locked. Remove the key to unlock the safety gate, and keep the load circuit and auxiliary circuit open. Ideal for applications where the key needs to be taken into a hazardous location to avoid accidental start-up of the device. Key interlock type ...
	IDEC/Izumi HE5B Enabling Switch HE9Z-D5Y Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance. Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation. Reduction of operating force in position 2 ...
	IDEC/Izumi HE1G-L Handheld Enabling Switch HE1G-L20ME 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance. Press OFF (position 3) ⇒ release OFF (position 1) to create an ON structure. (IEC60204-1:2005, 10.9, IEC60947-5-8:2007, 7.1.9), built-in 2 ...
	IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-R7Y4KMSRP-G Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
	IDEC/Izumi HS7A-DMC non-contact safety switch HS7A-DMC59110 Small size (external dimensions: 7mm× 16mm×51mm). Simple alignment during installation. Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type). IP67 protection structure. Mechanical Specifications: Contact structure 1NC+1NO Functional Specifications: Detection distance ...
	IDEC/Izumi HS5E-KVD005-2A501 Safety switch with key lock VD circuit, key detachable in all positions, Key 501, 5m cable Mechanical Specifications: Product Category Safety Interlocks Key removal location for all positions Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length: 5 meters Our customer-centric approach ...
	IDEC/Izumi HE1G Handheld Enabling Switch HE1G-20MB 3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. Pressing ON ⇒ OFF is a direct open-circuit action function. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. （IEC60204-1； 9.2.5.8 ...
	IDEC/Izumi HS1L Solenoid Safety Switch HS1L-DQ7Y4KMSR-G Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
	IDEC/Izumi HS1E-K Type Solenoid Safety Switch 3 Circuit Type HS1E-K844MSRP-R-T001 All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...
	IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP7015 By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored. Ideal for installation on protective doors where positioning is difficult. With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.
	IDEC/Izumi HS5E-KVD005-2C Safety switch with key lock VD circuit, key removal at LOCK position, 5m cable Mechanical Specifications: Product Category Safety Interlocks Key Removal Position Removed in the locked position Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length: 5 meters Our customer-centric service concept: ...
	IDEC/Hequan Safety Interlock HS5L-VC7Y4M-G Interlock 4 Cnt Solenoid Lock 4 Contacts, 2NC Door 1NC 1NO Lock Monitoring Circuit, Electromagnetic Lock Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: EN ISO14119 GS-ET ...
	IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP5002 By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored. Ideal for installation on protective doors where positioning is difficult. With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.
	IDEC/Izumi HS1E-K Type Solenoid Safety Switch 3 Circuit Type HS1E-K844MSR-R-T003 All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...
	IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP7012 By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored. Ideal for installation on protective doors where positioning is difficult. With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.
	IDEC/Izumi HS1L Solenoid Safety Switch HS1L-DT44KMSR-G Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
	IDEC/Izumi HS6E Submersible Locking HS6E-M44B03-G Safety Switch Spring Lock The world's thinnest solenoid interlock switch is 15mm wide Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions Energy saving - 24V DC/110 mA Three sides can be manually unlocked The LED indicator shows solenoid valve operation Standard 3m cable (available on request)
	IDEC/Izumi HS6E Submersible Locking HS6E-L44B01-G Safety Switch Snap Lock The world's thinnest solenoid interlock switch is 15mm wide Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions Energy saving - 24V DC/110 mA Three sides can be manually unlocked The LED indicator shows solenoid valve operation Standard 3m cable (available on request)