IDEC/Izumi HS1L Type Electromagnetic Safety Switch HS1L-DT7Y4KMSRM-R

4 Contacts, 1NC1NO Door, 1NC1NO Lock, Monitoring Circuit, Spring Lock Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: ENISO14119 GS-ET-19（T ...

All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...

IDEC/Izumi HS6B Subminiature HS6B-02B05 Safety Interlock Switch 2NC Contact, 3m Cable 30x15x78mm enclosure One-piece cables reduce wiring time IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage) Direct door opening action: even if ...

Small size (external dimensions: 7mm× 16mm×51mm). Simple alignment during installation. Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type). IP67 protection structure. Environmental Specifications Degree of protection IP66 Our customer-centric approach ...

3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance. Press OFF (position 3) ⇒ release OFF (position 1) to create an ON structure. (IEC60204-1:2005, 10.9, IEC60947-5-8:2007, 7.1.9), built-in 2 ...

Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance. Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation. Reduction of operating force in position 2 ...

Small size (external dimensions: 7mm× 16mm×51mm). Simple alignment during installation. Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type). IP67 protection structure. Mechanical Specifications: Contact structure 1NC+1NO Functional Specifications: Detection distance ...

The world's thinnest solenoid interlock switch is 15mm wide Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions Energy saving - 24V DC/110 mA Three sides can be manually unlocked The LED indicator shows solenoid valve operation Standard 3m cable (available on request)

Compact 3-position enable switch with auxiliary contacts. Ergonomic OFF→ ON → OFF 3-position action for hazard avoidance. Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...

3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. Pressing ON ⇒ OFF is a direct open-circuit action function. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. （IEC60204-1； 9.2.5.8 ...

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking Limit Switches 5000N INTLOCK SW 2CON SPR – HS1T-XH7Y4ZSM-G 2 contacts 2NC, solenoid lock, side conduit 5000N locking force is the smallest in the industry Spring-loaded terminals prevent loose wires Energy saving 200mA screw ...

The HS1B is a full-size interlock switch in a more rugged industrial die-cast aluminum housing. Options include red or green LED indicators, as well as two different circuit configurations. The HS2B comes with an optional red or green LED indicator and features the same ...

The world's thinnest solenoid interlock switch is 15mm wide Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions Energy saving - 24V DC/110 mA Three sides can be manually unlocked The LED indicator shows solenoid valve operation Standard 3m cable (available on request)

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

Ergonomic, 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance. Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation. Reduction of operating force in position 2 ...

Key features: The world's thinnest solenoid interlock switch is 15mm wide Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions Energy saving - 24V DC/110 mA Three sides can be manually unlocked The LED indicator shows solenoid valve operation Standard 3m cable (can be ...

2 contacts 2NC, spring lock, rear unlock button, side conduit 5000N locking force is the smallest in the industry Spring-loaded terminals prevent loose wires Energy saving 200mA solenoid consumption Electromagnetic lock and snaplock models are available Mechanical Specifications: Catheter opening M20 Catheter size M20 The main ...

Small size (external dimensions: 7mm× 16mm×51mm). Simple alignment during installation. Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type). IP67 protection structure. Mechanical Specifications: Contact structure 2NO Functional Specifications: The detection distance is 10m ...

Lightweight design with excellent grip. The ergonomic grip design provides comfortable operation with its compact and comfortable grip shape. Lightweight (approx. 140g for HE2G-21SH type) and compact size, it can be easily held even by users with small palms.