It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.
It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. The small form factor allows it to be installed in confined places. (30mm×30mm×91mm), supporting HS5 series universal actuators.
Double-insulated construction without grounding. By changing the mounting direction of the operating head, the actuator can be inserted in 8 directions, which can be adapted to various mounting needs.
The contacts are IP67 (IEC60529) protected.
The NC contact is a direct disconnect function. (IEC/EN60947-5-1), dedicated actuators reduce the risk of obsolescence. (ISO14119, EN1088), M3 wiring screws improve wiring efficiency.
Gold-plated contacts are available for small loads.
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces IDEC/Hequan HS5D type safety switch HS5D-12RNP products, if you are interested in IDEC/Hequan, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
IDEC/Izumi HS3A Non-Contact Safety Switch HS9Z-ZH31
The non-contact safety switch with RFID technology improves the safety performance.
Built-in safety features make the construction of a safety system independent of the combination with specific modules.
Thanks to the RFID method, there is no error even if the door closes slowly.
Even when installed on swing doors, sliding ...
|
|
IDEC/Izumi HS1L Type Electromagnetic Safety Switch HS1L-DT7Y4KMSRM-R
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HE2G Handheld Enabling Switch HE2G-21SC
Lightweight design with excellent grip.
The ergonomic grip design provides comfortable operation with its compact and comfortable grip shape. Lightweight (approx. 140g for HE2G-21SH type) and compact size, it can be easily held even by users with small palms.
|
|
IDEC/Izumi Safety Interlock HS5L Micro Lock HS5L-VC44LM-G
4 Contacts, 2NC Door, 1NC 1NO Lock Monitoring Circuit, Spring Lock, Rear Unlock Button
Compact body: 35x40x127mm
1400N locking strength
Gold-plated contacts for small loads
The head direction can be rotated
8 different actuator entries are allowed
Applicable standard: EN ISO ...
|
|
IDEC/Izumi Safety Interlock HS5E-K Micro Lock Safety switch with key lock HS5E-KVA003-2C502
Introduction: VA circuit, unplug the key at the LOCK position, key 502, 3m cable
Product Category Safety Interlocks
Key Removal Position Removed in the locked position
Degree of protection IP65
Cable length 3 meters
Our customer-centric service concept: a full range of services are pursued ...
|
|
IDEC/Izumi HS5E-KVD005-2C Safety switch with key lock
VD circuit, key removal at LOCK position, 5m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the locked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length: 5 meters
Our customer-centric service concept: ...
|
|
IDEC/Izumi HS5D Safety Switch HS5D-12RNM
It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.
It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...
|
|
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VB44ZLM-G
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VB44ZLM-G 4 contacts 1NC, 1NO and 2NC, spring lock, rear unlock button
5000N locking force is the smallest in the industry
Spring-loaded terminals prevent loose wires
Energy saving 200mA solenoid consumption
Provide electromagnetic locks and pop ...
|
|
IDEC/Izumi Safety Interlock HS5L Micro Lock HS5L-VD44LM-G
4 Contacts, 2NC Door, 2NC Lock, Monitoring Circuit, Spring Lock, Rear Unlock Button
Compact body: 35x40x127mm
1400N locking strength
Gold-plated contacts for small loads
The head direction can be rotated
8 different actuator entries are allowed
Applicable standard: EN ISO1411 ...
|
|
IDEC/Izumi HS1L Solenoid Safety Switch HS1L-R7Y4KMSRM-R
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HE2G Hand-held enabling switch
Small, lightweight, hand-held enabling switch with superior grip.
Key features:
Lightweight design with excellent grip.
The ergonomic grip design provides comfortable operation with its compact and comfortable grip shape. Lightweight (HE2G-21SH type approx. 140g...)
|
|
IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP7005
By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored.
Ideal for installation on protective doors where positioning is difficult.
With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.
|
|
IDEC/Izumi HS1L Solenoid Safety Switch HS1L-DT44KMSR-G
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HS6E Submersible Locking HS6E-L44B01-G Safety Switch Snap Lock
The world's thinnest solenoid interlock switch is 15mm wide
Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions
Energy saving - 24V DC/110 mA
Three sides can be manually unlocked
The LED indicator shows solenoid valve operation
Standard 3m cable (available on request)
|
|
IDEC/Izumi HS3A non-contact safety switch HS9Z-H3TP
The non-contact safety switch with RFID technology improves the safety performance.
Built-in safety features make the construction of a safety system independent of the combination with specific modules.
Thanks to the RFID method, there is no error even if the door closes slowly.
Even when installed on swing doors, sliding ...
|
|
IDEC/Izumi HS3A Non-contact Safety Switch HS3A-H21U4
The non-contact safety switch with RFID technology improves the safety performance.
Built-in safety features make the construction of a safety system independent of the combination with specific modules.
Thanks to the RFID method, there is no error even if the door closes slowly.
Even when installed on swing doors, sliding ...
|
|
IDEC/Izumi HS5E-KVD003-2C501 Safety switch with key lock
VD circuit, unplug the key at the LOCK position, key 501, 3m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the locked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length 3 meters
Our customer-centric ...
|
|
IDEC/Izumi HS3A Non-Contact Safety Switch HS3A-H21M4
The non-contact safety switch with RFID technology improves the safety performance.
Built-in safety features make the construction of a safety system independent of the combination with specific modules.
Thanks to the RFID method, there is no error even if the door closes slowly.
Even when installed on swing doors, sliding ...
|
|
IDEC/Izumi HS7A-DMC non-contact safety switch HS7A-DMC7902
Small size (external dimensions: 7mm× 16mm×51mm).
Simple alignment during installation.
Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type).
IP67 protection structure.
Mechanical Specifications:
Contact structure 2NO
Environmental Specifications
Degree of protection IP66
...
|
|
IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP5005
By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored.
Ideal for installation on protective doors where positioning is difficult.
With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.
|
|
Contact
working hours
