Multi-contact 3 position switch for large teach pendants. (max. 6 contacts)
Key features:
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 2 ⇒ 3 requires force and a clear sense of operation.
Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1 (2005): 10.9 items, IEC60947-5-8 (2006): 7.1.9 items, reduce the operating force of position 2 and enable long-term operation.
Even at the end of the operation button, a clear and stable sense of operation is achieved.
When OFF (position 1) is released, the ON state structure is not formed. （IEC60204-1 ； 9.2.5.8, IEC60947-5-8; 7.1.9), the auxiliary switch can distinguish between OFF (position 1) in the reset state of the button and OFF (position 3) in the pressing state. (The auxiliary switch has a direct open-circuit operation function) and has a built-in 2-contact that supports loop redundancy. (3 position switches, 2 contacts + push buttons, reset auxiliary switches, 2 contacts + push buttons, auxiliary switches, 2 contacts, maximum 6 contacts).
Waterproof structure (IP65) with rubber sleeve.
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces IDEC/Izumi HE2B enabling switch products, if you are interested in IDEC/Hequan, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
IDEC/Izumi HE3B enabling switch HE9Z-D3B
Ergonomic, 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance.
Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation.
Reduction of operating force in position 2 ...
|
|
IDEC/Izumi HE5B Enabling Switch HE9Z-D5Y
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation.
Reduction of operating force in position 2 ...
|
|
IDEC/Izumi HS1E-K Type Solenoid Safety Switch 3 Circuit Type HS1E-K844MSRP-R-T001
All M3.5 wiring screws are used to improve the connection line.
The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit.
There is also a key with a portable key as standard for hostage control ...
|
|
IDEC/Izumi HE1G Hand-held Enabling Switch
Achieve an ergonomic grip. Built-in two hand-held enable switches with 3 positions.
3 position action of OFF ⇒ ON ⇒ OFF to avoid danger.
Pressing ON ⇒ OFF is a direct open-circuit action function.
Use OFF (position 3) ⇒ release ...
|
|
IDEC/Izumi HS5 series slip-in door handle type actuator
Impact-resistant metal slip-on doorknob-type actuators ensure a safe working environment.
Key features:
It has a metal frame with high impact resistance.
A 2-step operation to prevent malfunction.
The rear lever unlocks from inside the safety barrier to ensure that in the event of a hazard ...
|
|
IDEC/Izumi HE1G Handheld Enabling Switch HE1G-20MB
3 position action of OFF ⇒ ON ⇒ OFF to avoid danger.
Pressing ON ⇒ OFF is a direct open-circuit action function.
By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state.
（IEC60204-1； 9.2.5.8 ...
|
|
IDEC/Izumi HE2B Enabling Switch HE2B-M200PY
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 2 ⇒ 3 requires force and a clear sense of operation.
Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...
|
|
IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP7012
By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored.
Ideal for installation on protective doors where positioning is difficult.
With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.
|
|
IDEC/Izumi HS5E-KVA0L05-2C safety switch with keylock
VA circuit, LOCK position key removal, 5m cable, rear unlock button
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the locked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length: 5 meters
Our customer-centric ...
|
|
IDEC/Izumi HS5E-KVA0L03-2A501 Safety switch with keylock
VA circuit, key detachable in all positions, key 501, 3m cable, rear unlock button
Mechanical Specifications:
Product Category Safety Interlocks
Key removal location for all positions
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length 3 meters
We take the guest ...
|
|
IDEC/Izumi HS1L Electromagnetic Safety Switch HS1L-DT7Y4KMSRP-G
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HE1G-L Hand-held Enabling Switch
With a clear feeling of pressure, the 3-position action can be reliably distinguished. By reducing the load on hand handling, the burden on the user during long-term use is reduced.
Key features:
3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance.
Press OFF (position 3)⇒ Release OFF...
|
|
IDEC/Izumi HE1G-L Handheld Enabling Switch HE1G-L20MCB-1N
3 position action of OFF ⇒ ON ⇒ OFF to avoid danger.
By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state.
(IEC60204-1:2005, 10.9 terms, IEC60947-5-8:2007, 7.1.9 terms),
|
|
IDEC/Izumi HS1E-K Electromagnetic Safety Switch 3 Circuit Type HS1E-K840MSR-T002
All M3.5 wiring screws are used to improve the connection line.
The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit.
There is also a key with a portable key as standard for hostage control ...
|
|
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking Limit Switch HS1T-XH44ZSM-G
Key features:
2 contacts 2NC, spring lock, side conduits
5000N locking force is the smallest in the industry
Spring-loaded terminals prevent loose wires
Energy saving 200mA solenoid consumption
Electromagnetic lock and snaplock models are available
Mechanical Specifications:
Catheter opening M20
Catheter size M20
The main contact ...
|
|
IDEC/Izumi HS1C type electromagnetic safety switch
Locks the guards until the machinery stops and the danger of inertia disappears.
Key features:
The actuator is mounted on the guard, the safety switch is mounted on the mechanical body, and the mechanical locking guard is installed.
After the inertial action of the machine is stopped, the electrical signal of the controller ...
|
|
IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-DT44KMSRM-R
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HS6E Submersible Locking HS6E-N44B05-G Safety Switch Spring Lock
Key features:
The world's thinnest solenoid interlock switch is 15mm wide
Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions
Energy saving - 24V DC/110 mA
Three sides can be manually unlocked
The LED indicator shows solenoid valve operation
Standard 3m cable (can be ...
|
|
IDEC/Izumi HS1L Solenoid Safety Switch HS1L-DT7Y4KMSR-G
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP5015
By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored.
Ideal for installation on protective doors where positioning is difficult.
With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.
|
|
Contact
working hours
