CHINT/CHINT CJ40 Series AC Contactor CJ40-400

POWGRID-M intelligent AC low-voltage complete set of equipment is a new generation of low-voltage switching system designed and developed by CHINT Low-voltage Intelligent Electrical Appliance Research Institute with completely independent intellectual property rights. It integrates many advantages of similar products at home and abroad, adopts standardized and modular design, and has the ability to measure the advantages of intelligent measurement.

OVT-X1H overvoltage tripper is suitable for AC 50Hz, rated voltage 230V line, and NBH-63, NBH-40 series circuit breaker matching, when the tripper terminal voltage rises to the voltage protection range, the tripper action and drive the circuit breaker to automatically break, so as to achieve the overvoltage of the line...

The UVT-7 undervoltage tripper is mainly used for under-voltage protection in the line with AC 50Hz (60Hz) and rated working voltage of 230V. Main parameters and technical performance Rated operating voltage: 230V AC life span Mechanical life: ≤4000 times This article introduces ...

UVT-X3H under-voltage tripper is suitable for AC 50Hz, rated voltage 230V line, and NBH-125 series circuit breaker is used together, when the terminal voltage of the tripper is reduced to the under-voltage protection range, the tripper acts and drives the circuit breaker to automatically break, so as to realize the under-voltage protection of the line. ...

Introduction: CHINT/CHINT contactor NC11 is mainly used in the meter box to control the power supply system of the meter: under normal circumstances, the main contact of the contactor is kept on (that is, the main contact is normally closed at four poles, and one of the poles is used for the protection of the user's neutral line short circuit), only when the user owes ...

HZ5 series combination switch is mainly used for AC 50Hz or 60Hz, voltage 380V and below electrical circuits as power switch and cage induction motor starting, commutation, variable speed switch, can also be used for control line switching. Comply with standards: GB/T 14048.3, IEC 60947-3. ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

The molded case circuit breaker provides protection for the lines and equipment when overload, short circuit and undervoltage occur in the lines and equipment in the distribution line, and can also provide overload, short circuit and undervoltage protection for the infrequent start of the motor. ● Shell Frame Grade NXM Series Molded Case Circuit Breaker: 63A, 125A, 160A ...

Introduction: CHINT/CHINT miniature circuit breaker NXB-63H is a new type of leakage circuit breaker integrating leakage relay, leakage circuit breaker, AC contactor, undervoltage and other functions. It can automatically distinguish between slowly variable leakage and abrupt leakage (electric shock) for protection Product parameters Forehead...

Introduction: CHINT/CHINT Plastic Housing Circuit Breaker NXB-125 is a new type of leakage circuit breaker integrating leakage relay, leakage circuit breaker, AC contactor, undervoltage and other functions. It can automatically distinguish between slowly variable leakage and abrupt leakage (electric shock) for protection Product parameters ...

LW6 series universal transfer switch is mainly suitable for control and conversion circuits in machine tool control circuits with AC 50Hz or 60Hz, voltage to 380V and DC voltage to 220V. It can also be used for the conversion of control circuits in other occasions, such as electromagnetic coils, electrical measuring instruments, etc. Standards: GB ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

TC is suitable for connecting wires in circuits with AC 50Hz or 60Hz, rated voltage to 600V, and rated current to 600A. This series of products is connected by screw crimping, and the wire end needs to be crimped before it can be connected to the terminal block. Screw mounting. Standards: ...

NBHLE-32 residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230V/400V, rated current to 32A in the line, play the role of overload, short circuit and leakage protection, can also be used as infrequent on-off of the line under normal circumstances. The product conforms to IEC61009-1, GB/T...

YBLX-HL travel switch is mainly used in the control circuit of AC 50Hz or 60Hz, voltage 380V, DC voltage 220V, for the travel control of the moving mechanism, the transformation of the direction or speed of the movement, the automatic control of the machine tool, the limit action of the moving mechanism and the control of the stroke or program. Comply with the standard ...

HY23 series instead of HZ3 series combination switch is suitable for AC 50Hz or 60Hz, voltage 380V circuit, as a power supply introduction switch, or as a three-phase squirrel cage induction motor with a control operation frequency of no more than 300 times per hour. Rated voltage: 380 Rated current: 30 Control Electricity ...

Introduction: NVF3G-QZ series products are the company's special inverter specially designed for the application characteristics and control requirements of the lifting industry, using advanced vector control technology and torque control technology, with fast load dynamic response, large low-frequency torque, strong overload capacity and other characteristics, and integration ...

NU210-40 is a surge protective device with short circuit protection. Connect to circuits and devices with an AC rated voltage of 230/400V, 50Hz. Able to protect terminal electrical equipment from the impact of induced lightning, it has the ability to protect against indirect lightning and direct lightning effects or other transient overvoltage surges.

AX-X1H auxiliary contact is mainly used in lines with AC rated voltage to 415V or DC rated voltage to 130V, and is assembled with NBH-40 and NBH-63 series miniature circuit breakers for signal indication of long-distance circuit breakers. The auxiliary contact is an accessory product.