It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.
It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. The small form factor allows it to be installed in confined places. (30mm×30mm×91mm), supporting HS5 series universal actuators.
Double-insulated construction without grounding. By changing the mounting direction of the operating head, the actuator can be inserted in 8 directions, which can be adapted to various mounting needs.
The contacts are IP67 (IEC60529) protected.
The NC contact is a direct disconnect function. (IEC/EN60947-5-1), dedicated actuators reduce the risk of obsolescence. (ISO14119, EN1088), M3 wiring screws improve wiring efficiency.
Gold-plated contacts are available for small loads.
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces IDEC/Hequan HS5D type safety switch HS5D-12ZRNM products, if you are interested in IDEC/Hequan, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
IDEC/Izumi HS5E-KVD005-2A502 Safety switch with key lock
VD circuit, key detachable in all positions, key 502,5m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key removal location for all positions
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length: 5 meters
Our customer-centric approach ...
|
|
IDEC/Izumi Safety Interlock HS6E Submersible Locking HS9Z-A62S Actuator Key Right Angle Type
IDEC/Izumi Safety Interlock HS6E Submersible Locking HS9Z-A62S Actuator Key Right Angle Type The world's thinnest electromagnetic interlock switch 15mm wide
Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions
Energy saving - 24V DC/110 mA
Three-sided handsome ...
|
|
IDEC/Izumi HS1E-K Solenoid Safety Switch 3 Circuit Type HS1E-K844MSR-G-T004
All M3.5 wiring screws are used to improve the connection line.
The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit.
There is also a key with a portable key as standard for hostage control ...
|
|
IDEC/Izumi HS3A non-contact safety switch HS9Z-H3TP
The non-contact safety switch with RFID technology improves the safety performance.
Built-in safety features make the construction of a safety system independent of the combination with specific modules.
Thanks to the RFID method, there is no error even if the door closes slowly.
Even when installed on swing doors, sliding ...
|
|
IDEC/Izumi HE6B Enabling Switch HE6B-M211B
Compact 3-position enable switch with auxiliary contacts.
Ergonomic OFF→ ON → OFF 3-position action for hazard avoidance.
Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed.
IEC60204-1（2005） ...
|
|
IDEC/Izumi HS1C type solenoid safety switch HS1C-L144R-G
The actuator is mounted on the guard, the safety switch is mounted on the mechanical body, and the mechanical locking guard is installed.
When the inertial action of the machine stops, the electromagnetic coil excitation is unlocked by an electrical signal from the controller, etc., for greater safety.
In the event of a power outage and maintenance, special tools can be used ...
|
|
IDEC/Izumi HE1G-L Handheld Enabling Switch HE1G-L20MB-1N
3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance.
Press OFF (position 3) ⇒ release OFF (position 1) to create an ON structure. (IEC60204-1:2005, 10.9, IEC60947-5-8:2007, 7.1.9), built-in 2 ...
|
|
IDEC/Izumi HS1E-K Type Solenoid Safety Switch 3 Circuit Type HS1E-K844MSR-R-T003
All M3.5 wiring screws are used to improve the connection line.
The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit.
There is also a key with a portable key as standard for hostage control ...
|
|
IDEC/Izumi HS7A-DMC non-contact safety switch HS7A-DMC7905
Small size (external dimensions: 7mm× 16mm×51mm).
Simple alignment during installation.
Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type).
IP67 protection structure.
Product Specifications:
Mechanical Specifications:
Contact structure 2NO
Environmental Specifications
Protection...
|
|
IDEC/Izumi HS5E-KVA003-2B501 Safety switch with key lock
VA circuit, key removal at unlock position, key 501, 3m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the unlocked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length 3 meters
Our customer-centric approach ...
|
|
IDEC/Izumi HS5E-KVA0L05-2A501 Safety switch with keylock
VA circuit, key removable in all positions, key 501, 5m cable, rear unlock button
Mechanical Specifications:
Product Category Safety Interlocks
Key removal location for all positions
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length: 5 meters
We take our customers as the ...
|
|
IDEC/Izumi HS5D Safety Switch HS5D-11ZRNM
It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.
It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...
|
|
IDEC/Izumi HS5E-KVA0L03-2B501 Safety switch with keylock
VA circuit, key removal for unlock position, key 501, 3m cable, rear unlock button
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the unlocked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length 3 meters
We take the guest ...
|
|
IDEC/Izumi HS5D Safety Switch HS5D-12RNP
It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.
It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...
|
|
IDEC/Izumi Safety Interlock HS5L-VC44M-G Interlock 4 CNT Spring Lock
4 Contacts, 2NC Door, 1NC 1NO Lock, Monitoring Circuit, Spring Lock
Compact body: 35x40x127mm
1400N locking strength
Gold-plated contacts for small loads
The head direction can be rotated
8 different actuator entries are allowed
Applicable standard: EN ISO14119
GS-E ...
|
|
IDEC/Izumi HS5D Safety Switch HS5D-02ZRNM
It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.
It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...
|
|
IDEC/Izumi HE2B Enabling Switch HE2B-M222PB
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 2 ⇒ 3 requires force and a clear sense of operation.
Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...
|
|
IDEC/Izumi HE3B enabling switch HE9Z-D3B
Ergonomic, 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance.
Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation.
Reduction of operating force in position 2 ...
|
|
IDEC/Izumi HE1G Handheld Enabling Switch HE1G-20MB-1N
3 position action of OFF ⇒ ON ⇒ OFF to avoid danger.
Pressing ON ⇒ OFF is a direct open-circuit action function.
By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state.
（IEC60204-1； 9.2.5.8 ...
|
|
IDEC/Izumi safety switch HS1B-114R-R
64x40x125 mm housing, direct opening action: If the doors are forcibly opened, the contacts will be disconnected even if they are welded or stuck, with or without indicator (red or green), available in 2 contact configurations (1NO/1NC or 2NC ), in accordance with ISO14119 ...
|
|
Contact
working hours
