|
IDEC/Izumi Safety Interlock HS6B Subminiature Switch
The HS6B is the smallest three-contact enable switch on the market today and can be installed in even the tightest areas, so you can be sure of safety in every necessary location. The design consists of a total of 3 contacts, a double load contact and a monitoring contact (according to ISO13849-1, EN954-1 ...
|
|
IDEC/Izumi HS1E-K Solenoid Safety Switch 3 Circuit Type HS1E-K844MSR-G-T004
All M3.5 wiring screws are used to improve the connection line.
The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit.
There is also a key with a portable key as standard for hostage control ...
|
|
IDEC/Izumi HE2B Enabling Switch HE2B-M211
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 2 ⇒ 3 requires force and a clear sense of operation.
Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1(2005) ...
|
|
IDEC/Izumi HS1C-K Solenoid Safety Switch HS1C-K244R-G-T012
During mechanical operation, the guards/keys are securely locked.
Remove the key to unlock the safety gate, and keep the load circuit and auxiliary circuit open.
Ideal for applications where the key needs to be taken into a hazardous location to avoid accidental start-up of the device.
Key interlock type ...
|
|
IDEC/Izumi HS5E-KVA0L05-2B Safety switch with keylock
VA circuit, key removal for unlock position, 5m cable, rear unlock button
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the unlocked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length: 5 meters
Our customer-centric ...
|
|
IDEC/Izumi HS5B Safety Switch HS5B-11ZBM
Small size: 30mm× 30mm×90mm, by changing the mounting direction of the top, the actuator can be inserted from 8 positions, so as to meet different installation needs.
IP67 (IEC60529) protection structure is used for the contact parts.
The NC contact has a direct disconnect operation structure. (IEC/EN60947 ...
|
|
IDEC/Izumi HE2B Enabling Switch HE2B-M222PN1
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 2 ⇒ 3 requires force and a clear sense of operation.
Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1(2005) ...
|
|
IDEC/Izumi HS6B Subminiature HS6B-11B03 Safety Interlock Switch 1NC1NO
IDEC/Izumi HS6B Subminiature HS6B-11B03 Safety Interlock Switch 1NC1NO 1NC 1NO Contact, 3m Cable
30x15x78mm enclosure
One-piece cables reduce wiring time
IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage)
Open directly ...
|
|
IDEC/Izumi HS1E-K Type Solenoid Safety Switch 3 Circuit Type HS1E-K844MSR-R-T005
All M3.5 wiring screws are used to improve the connection line.
The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit.
There is also a key with a portable key as standard for hostage control ...
|
|
IDEC/Izumi HS5E-KVD005-2B501 Safety switch with key lock
VD circuit, key removal in unlock position, key 501,5m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the unlocked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length: 5 meters
Our customer-centric approach ...
|
|
IDEC/Izumi HS1E-K Solenoid Safety Switch 3 Circuit Type HS1E-K844MSR-G-T001
All M3.5 wiring screws are used to improve the connection line.
The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit.
There is also a key with a portable key as standard for hostage control ...
|
|
IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-R7Y4KMSRP-G
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HS1C-K Solenoid Safety Switch HS1C-K244R-G-T007
During mechanical operation, the guards/keys are securely locked.
Remove the key to unlock the safety gate, and keep the load circuit and auxiliary circuit open.
Ideal for applications where the key needs to be taken into a hazardous location to avoid accidental start-up of the device.
Key interlock type ...
|
|
IDEC/Izumi HS6B Subminiature HS6B-12B05 Safety Interlock Switch 2NC1NO
IDEC/Izumi HS6B Subminiature HS6B-12B05 Safety Interlock Switch 2NC1NO 2NC 1NO Contact, 3m Cable
30x15x78mm enclosure
One-piece cables reduce wiring time
IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage)
Open directly ...
|
|
IDEC/Izumi HE1G-L Handheld Enabling Switch HE1G-L21SM
3 position action of OFF ⇒ ON ⇒ OFF to avoid danger.
By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state.
(IEC60204-1:2005, 10.9 terms, IEC60947-5-8:2007, 7.1.9 terms),
|
|
IDEC/Hequan Safety Interlock HS5L Micro Lock HS5L-DD44M-G Interlock 4 Cnt Spring Lock
4 contacts, dual safety circuits, 1NC+1NC 1NC+1NC circuits, spring locks
Compact body: 35x40x127mm
1400N locking strength
Gold-plated contacts for small loads
The head direction can be rotated
8 different actuator entries are allowed
Applicable standard: EN ISO14119 ...
|
|
IDEC/Izumi Safety Switch HS1B-11R
64x40x125 mm housing, direct opening action: If the doors are forcibly opened, the contacts will be disconnected even if they are welded or stuck, with or without indicator (red or green), available in 2 contact configurations (1NO/1NC or 2NC ), in accordance with ISO14119 ...
|
|
IDEC/Hequan Safety Interlock HS5L Micro Lock HS5L-VD7Y4M-G Interlock 4 CNT Solenoid Lock
4 Contacts, 2NC Gate, 2NC Lock, Monitoring Circuit, Electromagnetic Lock
Compact body: 35x40x127mm
1400N locking strength
Gold-plated contacts for small loads
The head direction can be rotated
8 different actuator entries are allowed
Applicable standard: EN ISO14119
GS-ET-19 ...
|
|
IDEC/Izumi HE1G-L Handheld Enabling Switch HE1G-L21SMC
3 position action of OFF ⇒ ON ⇒ OFF to avoid danger.
By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state.
(IEC60204-1:2005, 10.9 terms, IEC60947-5-8:2007, 7.1.9 terms),
|
|
IDEC/Izumi HE2B Enabling Switch HE2B-M200
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 2 ⇒ 3 requires force and a clear sense of operation.
Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1(2005) ...
|