|
IDEC/Izumi HS7A-DMC non-contact safety switch HS7A-DMC5905
Small size (external dimensions: 7mm× 16mm×51mm).
Simple alignment during installation.
Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type).
IP67 protection structure.
Mechanical Specifications:
Contact structure 1NC+1NO
Environmental Specifications
Protection class I ...
|
|
IDEC/Izumi HS5E-K Series Key-Locking Safety Switch HS5E-KVD0L03-2A502
The operating head detachment detection function is standard.
The key is made of a high-security bullet lock. There are 16 key numbers to choose from.
There is a rear unlock button type for emergency evacuation and other purposes, and it can be attached to the rear lock release button unit attached to the aluminum frame.
Adopt a small negative ...
|
|
IDEC/Hequan Safety Interlock HS5L Micro Lock HS5L-XF7Y4M-G Interlock 2 CNT Solenoid Lock
2 contacts, 2NC door monitoring circuitry, electromagnetic lock
Compact body: 35x40x127mm
1400N locking strength
Gold-plated contacts for small loads
The head direction can be rotated
8 different actuator entries are allowed
Applicable standard: EN ISO14119
GS-ET-19
|
|
IDEC/Izumi HE3B Enabling Switch HE3B-M2PB
Ergonomic, 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance.
Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation.
Reduction of operating force in position 2 ...
|
|
IDEC/Izumi HS5E-KVD003-2B Safety switch with key lock
VD circuit, key removal for unlock position, 3m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the unlocked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length 3 meters
Our customer-centric service concept: ...
|
|
IDEC/Izumi HE1G Handheld Enabling Switch HE1G-20ME-1N
Achieve an ergonomic grip. Built-in two hand-held enable switches with 3 positions.
3 position action of OFF ⇒ ON ⇒ OFF to avoid danger.
Pressing ON ⇒ OFF is a direct open-circuit action function.
Use OFF (position 3) ⇒ release ...
|
|
IDEC/Izumi HS5E-K Series Key-Locking Safety Switch HS5E-KVD0L05-2C
The operating head detachment detection function is standard.
The key is made of a high-security bullet lock. There are 16 key numbers to choose from.
There is a rear unlock button type for emergency evacuation and other purposes, and it can be attached to the rear lock release button unit attached to the aluminum frame.
Adopt a small negative ...
|
|
IDEC/Hequan Safety Interlock HS5L Miniature Lock HS5L-VJ44M-G Safety Interlock Spring Lock
Main features: compact body 35x40x127mm
1400N locking force
Spring or electromagnetic lock type
2 or 4 contact types
Spring-loaded clamp terminals
Gold-plated contacts
Head removal detection circuitry
B10d:2.0E+06
Mechanical Specifications:
Catheter opening M20
Catheter size M20
The main contact ...
|
|
IDEC/Izumi HS6E Submersible Locking HS6E-L7Y4B01-G Safety Switch Solenoid Lock
The world's thinnest solenoid interlock switch is 15mm wide
Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions
Energy saving - 24V DC/110 mA
Three sides can be manually unlocked
The LED indicator shows solenoid valve operation
Standard 3m cable (available on request)
|
|
IDEC/Izumi Safety Switch HS6E Type Electromagnetic Safety Switch HS6E-N7Y4B01-G
IDEC/Izumi Safety Switch HS6E Electromagnetic Safety Switch HS6E-N7Y4B01-G The main features are 75mm×15mm×75mm. The 15mm thick solenoid safety switch is the leading level in the industry.
The actuator is installed on both sides of the switch to provide four insertion directions; Diagonally protruding ...
|
|
IDEC/Izumi HS1L Electromagnetic Safety Switch HS1L-DT7Y4KMSRP-G
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VG7Y4ZM-G
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VG7Y4ZM-G 4 contacts 2NC, 1NO and 1NC, solenoid lock
5000N locking force is the smallest in the industry
Spring-loaded terminals prevent loose wires
Energy saving 200mA solenoid consumption
Electromagnetic lock and snaplock models are available
Machine...
|
|
IDEC/Izumi HS6B Subminiature HS6B-02B05 Safety Interlock Switch 2NC
IDEC/Izumi HS6B Subminiature HS6B-02B05 Safety Interlock Switch 2NC Contact, 3m Cable
30x15x78mm enclosure
One-piece cables reduce wiring time
IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage)
Direct door opening action: even if ...
|
|
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VW7Y4ZM-G
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VW7Y4ZM-G 4 Contacts 1NO & 3NC, Electromagnetic Lock
5000N locking force is the smallest in the industry
Spring-loaded terminals prevent loose wires
Energy saving 200mA solenoid consumption
Electromagnetic lock and snaplock models are available
Mechanical Gauge ...
|
|
IDEC/Izumi HE3B Enabling Switch HE9Z-D3N1
Ergonomic, 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance.
Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation.
Reduction of operating force in position 2 ...
|
|
IDEC/Izumi HE6B enabling switch HE9Z-D6Y
Compact 3-position enable switch with auxiliary contacts.
Ergonomic OFF→ ON → OFF 3-position action for hazard avoidance.
Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed.
IEC60204-1(2005) ...
|
|
IDEC/Izumi HS6E Submersible Locking HS6E-M44B03-G Safety Switch Spring Lock
The world's thinnest solenoid interlock switch is 15mm wide
Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions
Energy saving - 24V DC/110 mA
Three sides can be manually unlocked
The LED indicator shows solenoid valve operation
Standard 3m cable (available on request)
|
|
IDEC/Izumi HS5E-KVA0L05-2C501 Safety switch with key lock
VA circuit, LOCK position key removal, key 501,5m cable, rear unlock button
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the locked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length: 5 meters
We take the guest ...
|
|
IDEC/Izumi HE5B Enabling Switch HE9Z-GSH51
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation.
Reduction of operating force in position 2 ...
|
|
IDEC/Izumi HS1C-K Solenoid Safety Switch HS1C-K244R-R-T001
During mechanical operation, the guards/keys are securely locked.
Remove the key to unlock the safety gate, and keep the load circuit and auxiliary circuit open.
Ideal for applications where the key needs to be taken into a hazardous location to avoid accidental start-up of the device.
Key interlock type ...
|