IDEC/Izumi HS1E-K Solenoid Safety Switch 3 Circuit Type HS1E-K844MSR-G-T004

Create Date: 2024-8-30 12:03:23|Source: IDEC/Izumi

Previous
Next
Brand:
IDEC/Izumi

Origin:
Japan

Price:
Please contact customer service

Delivery time:
Please contact customer service

Model:
HS1E-K844MSR-G-T004

Product Introduction
All M3.5 wiring screws are used to improve the connection line

quality assurance

Attentive service

Secure transactions

Product Description

All M3.5 wiring screws are used to improve the connection line.

IDEC/Izumi HS1E-K Solenoid Safety Switch 3 Circuit Type HS1E-K844MSR-G-T004

The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit.

In addition, there is a key interlock type with a standard portable key that can realize hostage control, so you can carry the portable key into large equipment to ensure safety.

The actuator is mounted on the safety gate, the safety switch is installed on the mechanical body, and the gate can be automatically locked mechanically.

When the inertial operation of the machine is stopped, the electromagnetic coil is unlocked by an electronic signal from the controller, etc., for greater safety.

This is a resin safety switch with a locking strength of 3000N∗ by strengthening the locking mechanism and actuator.

The actuator insertion port of the main body has been enlarged to improve the ability to cope with the shaking of the door.

The key interlock type is available with 10 keys to choose from, eliminating the need for key swapping between adjacent devices.

There are two directions in which the actuator is inserted.

Double-insulated structure without grounding wire.

∗ Notation is a lock strength value in the horizontal direction (parallel to the panel).

Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.

This article introduces IDEC/Hequan HS1E-K type electromagnetic safety switch 3 circuit type HS1E-K844MSR-G-T004 products, if you are interested in IDEC/Izumi, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.

More on that

	IDEC/Izumi HS5D Safety Switch HS5D-02ZRNP It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off. It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...
	IDEC/Izumi Safety Interlock HS5L Micro Lock HS9Z-A53 Safety Switch Actuator Key IDEC/Izumi Safety Interlock HS5L Micro Lock HS9Z-A53 Safety Switch Actuator Key Key features: Angle-adjustable (vertical) actuators Product Category Actuators The company has always been customer-centric, the concept of creating value for customers, and winning with quality and service.
	IDEC/Izumi HE6B enabling switch HE9Z-D6B Compact 3-position enable switch with auxiliary contacts. Ergonomic OFF→ ON → OFF 3-position action for hazard avoidance. Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...
	IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-R7Y4KMSR-R Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
	IDEC/Izumi Safety Interlock HS5L Micro Lock HS9Z-A51 Actuator Key Straight Type IDEC/Izumi Safety Interlock HS5L Micro Lock HS9Z-A51 Actuator Key Straight Type Linear Actuator Product Category Actuators The company has always been customer-centric, the concept of creating value for customers, quality and service to win the market, sincerely hope to cooperate with all sectors of society to create ...
	IDEC/Izumi HE1G-L Handheld Enabling Switch HE1G-L21SM 3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. (IEC60204-1:2005, 10.9 terms, IEC60947-5-8:2007, 7.1.9 terms),
	IDEC/Izumi HS1E-K Type Solenoid Safety Switch 3 Circuit Type HS1E-K844MSR-G-T002 All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...
	IDEC/Izumi HE1G Handheld Enabling Switch HE1G-21SM-1N 3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. Pressing ON ⇒ OFF is a direct open-circuit action function. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. （IEC60204-1； 9.2.5.8 ...
	IDEC/Izumi HS5E-KVD003-2B501 Safety switch with key lock VD circuit, key removal at unlock position, key 501, 3m cable Mechanical Specifications: Product Category Safety Interlocks Key Removal Position Removed in the unlocked position Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length 3 meters Our customer-centric approach ...
	IDEC/Izumi HE2B Enabling Switch HE2B-M222PB Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance. Position 2 ⇒ 3 requires force and a clear sense of operation. Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...
	IDEC/Izumi HS5E-KVD005-2C501 Safety switch with key lock VD circuit, unplug the key at the LOCK position, key 501,5m cable Mechanical Specifications: Product Category Safety Interlocks Key Removal Position Removed in the locked position Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length: 5 meters Our customer-centric ...
	IDEC/Izumi HS6B Safety Switch HS9Z-A61 IDEC/Izumi HS6B type safety switch HS9Z-A61 Main features: 30mm×15mm×78mm small safety switch. 3 contacts of dual contact + auxiliary contact for applications with high safety requirements. （ISO13849-1, EN954-1） Plugged in from 2 actuators on request
	IDEC/Izumi HE1G Handheld Enabling Switch HE1G-20MB-1N 3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. Pressing ON ⇒ OFF is a direct open-circuit action function. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. （IEC60204-1； 9.2.5.8 ...
	IDEC/Hequan HS3A Non-contact Safety Switch HS9Z-H3F510 The non-contact safety switch with RFID technology improves the safety performance. Built-in safety features make the construction of a safety system independent of the combination with specific modules. Thanks to the RFID method, there is no error even if the door closes slowly. Even when installed on swing doors, sliding ...
	IDEC/Izumi HS1L Electromagnetic Safety Switch HS1L-DT7Y4KMSRP-G Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
	IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP5012 By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored. Ideal for installation on protective doors where positioning is difficult. With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.
	IDEC/Hequan Safety Interlock HS5L-XG7Y4M-G Interlock 2 CNT Solenoid Lock 2 contacts, 1NC 1NO access control monitoring circuit, electromagnetic lock Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: EN ISO14119 GS-ET-19（ ...
	IDEC/Izumi HS7A-DMP non-contact safety switch Three new contact types have been added, and the opening and closing status of the door can be monitored by connecting the auxiliary contact to the PLC Key features: By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored. Ideal for installation on protective doors where positioning is difficult. By adapting ...
	IDEC/Izumi HS1E-K Type Solenoid Safety Switch 3 Circuit Type HS1E-K840MSR-T003 All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...
	IDEC/Izumi HS5E-K Series Key-Locking Safety Switch HS5E-KVD0L05-2B The operating head detachment detection function is standard. The key is made of a high-security bullet lock. There are 16 key numbers to choose from. There is a rear unlock button type for emergency evacuation and other purposes, and it can be attached to the rear lock release button unit attached to the aluminum frame. Adopt a small negative ...