IDEC/Izumi HS1C type solenoid safety switch HS1C-L144R-G

IDEC/Izumi HS6B Subminiature HS6B-02B05 Safety Interlock Switch 2NC Contact, 3m Cable 30x15x78mm enclosure One-piece cables reduce wiring time IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage) Direct door opening action: even if ...

Achieve an ergonomic grip. Built-in two hand-held enable switches with 3 positions. 3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. Pressing ON ⇒ OFF is a direct open-circuit action function. Use OFF (position 3) ⇒ release ...

By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored. Ideal for installation on protective doors where positioning is difficult. With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.

Achieve a high level of 3000N locking strength. Suitable for large/heavy doors as well as sturdy doors that require high locking strength. Key features: Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6 Within the Contacts ...

IDEC/Izumi Safety Interlock HS5L Miniature Lock HS9Z-A52 Actuator Key Right Angle Type Right Angle Actuator Product Category Actuators The company has always been customer-centric, the concept of creating value for customers, quality and service to win the market, and sincerely hope to cooperate with all walks of life to ...

Introduction: VA circuit, key detachable in all positions, key 502, 3m cable Product Category Safety Interlocks Key removal location for all positions Degree of protection IP65 Cable length 3 meters Our customer-centric service concept: a full range of services are pursued as a high...

All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...

VA circuit, key removal at LOCK position, 5m cable Mechanical Specifications: Product Category Safety Interlocks Key Removal Position Removed in the locked position Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length: 5 meters Our customer-centric service concept: ...

Small size: 30mm× 30mm×90mm, by changing the mounting direction of the top, the actuator can be inserted from 8 positions, so as to meet different installation needs. IP67 (IEC60529) protection structure is used for the contact parts. The NC contact has a direct disconnect operation structure. （IEC/EN60947 ...

VA circuit, key removal at unlock position, key 501, 3m cable Mechanical Specifications: Product Category Safety Interlocks Key Removal Position Removed in the unlocked position Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length 3 meters Our customer-centric approach ...

Small size (external dimensions: 7mm× 16mm×51mm). Simple alignment during installation. Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type). IP67 protection structure. Mechanical Specifications: Contact structure 2NO Functional Specifications: The detection distance is 10m ...

IDEC/Izumi Safety Interlock HS5D Micro HS9Z-LH5KLHS5 Plastic Slide Communicator Plastic Slide Handle Actuator for HS5 Series with Key and Rear Lever Product Category: Door Handle Actuators The company has always been customer-centric, the concept of creating value for customers, and the concept of ...

The actuator is mounted on the guard, the safety switch is mounted on the mechanical body, and the mechanical locking guard is installed. When the inertial action of the machine stops, the electromagnetic coil excitation is unlocked by an electrical signal from the controller, etc., for greater safety. In the event of a power outage and maintenance, special tools can be used ...

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

During mechanical operation, the guards/keys are securely locked. Remove the key to unlock the safety gate, and keep the load circuit and auxiliary circuit open. Ideal for applications where the key needs to be taken into a hazardous location to avoid accidental start-up of the device. Key interlock type ...

By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored. Ideal for installation on protective doors where positioning is difficult. With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.

Lightweight design with excellent grip. The ergonomic grip design provides comfortable operation with its compact and comfortable grip shape. Lightweight (approx. 140g for HE2G-21SH type) and compact size, it can be easily held even by users with small palms.

3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. (IEC60204-1:2005, 10.9 terms, IEC60947-5-8:2007, 7.1.9 terms),

Lightweight design with excellent grip. The ergonomic grip design provides comfortable operation with its compact and comfortable grip shape. Lightweight (approx. 140g for HE2G-21SH type) and compact size, it can be easily held even by users with small palms.