CHINT/CHINT AL-X1H alarm contact

NXRC series contactor relays are mainly used in relay control, signal transmission, isolation amplification and other circuits with AC 50Hz or 60Hz, rated working voltage to 380V and DC rated voltage to 220V, for switching, breaking and amplifying. ● Conform to standards: GB/T 14048.5, IE ...

NX50 is a high-end distribution box newly developed by CHINT Research Institute, which is widely used in household indoor power distribution to ensure the safety of various indoor electrical facilities, including lighting, kitchen equipment, air conditioning and other equipment. It can also be used for office buildings, shopping mall decoration, etc. This article introduces CHINT/CHINT ...

PZ30 series open/concealed distribution box (box) (hereinafter referred to as the box) is a device suitable for installing 9mm modularized terminal electrical components, it has the characteristics of using electrical size modularization, installation rail, artistic appearance, safety of use, etc., it is suitable for AC 50 ...

Rated working voltage (Ue): AC230V 50Hz; Rated insulation voltage (Ui): 500V; Overvoltage Action Setting Value (Uo): 280 (1+5%) V; Tripper action characteristics: When the main circuit voltage is 230 (1+5%)V, the tripper should be able to keep the circuit breaker working for a long time. When the Lord ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

YBLX-HL travel switch is mainly used in the control circuit of AC 50Hz or 60Hz, voltage 380V, DC voltage 220V, for the travel control of the moving mechanism, the transformation of the direction or speed of the movement, the automatic control of the machine tool, the limit action of the moving mechanism and the control of the stroke or program. Comply with the standard ...

NB1L-40 □ residual current action circuit breaker is suitable for AC 50Hz, rated voltage single pole two wires, two poles 230V, three poles, three poles four wires, four poles 400V, rated current to 40A line, when the person is electrocuted or the leakage current of the power grid exceeds the specified value, the residual current action circuit breaker can be used in the pole ...

The new NXC series of AC contactors is an innovative and compact design. It is mainly used to start and control AC motors frequently, turn on and break circuits at long distances, and can form electromagnetic starters with appropriate thermal overload relays. ●Conform to the standard: GB/T 14048.1/IEC 6094 ...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

CJ19 series switching capacitor contactor (hereinafter referred to as contactor) is mainly used in power lines with AC 50Hz (or 60Hz) and rated working voltage to 690V, which is used for low-voltage reactive power compensation equipment to put in or remove low-voltage shunt capacitors. Contactors with inhibition ...

NBH-63H miniature circuit breaker is suitable for AC 50Hz, rated voltage 230V/400V, rated current to 63A in the line, for overload and short circuit protection, under normal circumstances, as the line of infrequent operation and conversion, can also be used as a disconnection of the line for line and equipment maintenance of the isolation open...

CJ19 series switching capacitor contactor (hereinafter referred to as contactor) is mainly used in power lines with AC 50Hz (or 60Hz) and rated working voltage to 690V, which is used for low-voltage reactive power compensation equipment to put in or remove low-voltage shunt capacitors. Contactors with inhibition ...

NB1L residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230V, rated current to 40A line, when the person is electrocuted or the leakage current of the power grid exceeds the specified value, the residual current action circuit breaker can quickly cut off the fault power supply in a very short time, protect people and electrical equipment...

Introduction: CHINT/CHINT AC contactor CJX2 series (hereinafter referred to as contactor) is mainly used for AC 50Hz (or 60Hz), rated working voltage to 690V, in the AC-3, 400 (380) V use category rated working current to 95A circuit, for long-distance connection and breaking of circuits, frequency ...

The circuit breaker is rated for insulation voltage up to 800V, suitable for AC 50Hz/60Hz, rated working voltage up to 690V (415V for 2P products and NM1-63), rated working current from 10A to 250A in the distribution network circuit, used to distribute power and protect line and power supply equipment from overload, short circuit ...

POWGRID-M intelligent AC low-voltage complete set of equipment is a new generation of low-voltage switching system designed and developed by CHINT Low-voltage Intelligent Electrical Appliance Research Institute with completely independent intellectual property rights. It integrates many advantages of similar products at home and abroad, adopts standardized and modular design, and has the ability to measure the advantages of intelligent measurement.

Rated working voltage (Ue): AC 230V, 50Hz; Overvoltage action setting value (Uo): 280(1±5%)V; Undervoltage action setting value: (35%-70%) Ue; Rated insulation voltage (Ui) : 500V; Trip characteristics: Tripper combined with NXB-63 series circuit breaker ...

DZ20 series plastic shell circuit breaker (hereinafter referred to as circuit breaker), its rated insulation voltage is 660V, AC 50Hz, rated working voltage 380V and below, and its rated current is from 32A to 1250A. Generally used for power distribution, the rated current of type C is 160A and below, and the shell of type 630 and below ...

AX-6 auxiliary contact is mainly used in AC 50Hz, rated heating current to 6A, rated voltage to 415V or DC rated voltage to 130V line, which is assembled with NB1 series circuit breaker for signal indication of long-distance circuit breaker on/off. Standards: GB/T 14048.5, IEC 6094 ...

CJ19 series switching capacitor contactor (hereinafter referred to as contactor) is mainly used in power lines with AC 50Hz (or 60Hz) and rated working voltage to 690V, which is used for low-voltage reactive power compensation equipment to put in or remove low-voltage shunt capacitors. Contactors with inhibition ...