IDEC/Izumi HS5D Safety Switch HS5D-03RNP

Create Date: 2024-8-30 12:03:23|Source: IDEC/Izumi

Previous
Next
Brand:
IDEC/Izumi

Origin:
Japan

Price:
Please contact customer service

Delivery time:
Please contact customer service

Model:
HS5D-03RNP

Product Introduction
A 3-contact model with dual contacts + auxiliary contacts is available

quality assurance

Attentive service

Secure transactions

Product Description

It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.

IDEC/Izumi HS5D Safety Switch HS5D-03RNP

It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. The small form factor allows it to be installed in confined places. (30mm×30mm×91mm), supporting HS5 series universal actuators.

Double-insulated construction without grounding. By changing the mounting direction of the operating head, the actuator can be inserted in 8 directions, which can be adapted to various mounting needs.

The contacts are IP67 (IEC60529) protected.

The NC contact is a direct disconnect function. (IEC/EN60947-5-1), dedicated actuators reduce the risk of obsolescence. (ISO14119, EN1088), M3 wiring screws improve wiring efficiency.

Gold-plated contacts are available for small loads.

Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.

This article introduces IDEC/Hequan HS5D type safety switch HS5D-03RNP products, if you are interested in IDEC/Hequan, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.

More on that

	IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-DT44MSR-G Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
	IDEC/Izumi HE1G-L Handheld Enabling Switch HE1G-L20MCB-1N 3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. (IEC60204-1:2005, 10.9 terms, IEC60947-5-8:2007, 7.1.9 terms),
	IDEC/Izumi HE1G-L Handheld Enabling Switch HE1G-L21SMB-1N 3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. (IEC60204-1:2005, 10.9 terms, IEC60947-5-8:2007, 7.1.9 terms),
	IDEC/Izumi HS5D Safety Switch HS5D-12RNP It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off. It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...
	IDEC/Izumi HS1L Solenoid Safety Switch HS1L-DT44KMSR-G Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
	IDEC/Izumi HS1C-K Type Solenoid Safety Switch HS1C-K244R-G-T008 During mechanical operation, the guards/keys are securely locked. Remove the key to unlock the safety gate, and keep the load circuit and auxiliary circuit open. Ideal for applications where the key needs to be taken into a hazardous location to avoid accidental start-up of the device. Key interlock type ...
	IDEC/Izumi HE1G Handheld Enabling Switch HE9Z-GBK1-1N 3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. Pressing ON ⇒ OFF is a direct open-circuit action function. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. （IEC60204-1； 9.2.5.8 ...
	IDEC/Izumi HS1L Electromagnetic Safety Switch HS1L-R44KMSR-R Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
	IDEC/Izumi HS6E Submersible Locking HS6E-P7Y4B03-G Safety Switch Solenoid Lock IDEC/Izumi HS6E Submersible Locking HS6E-P7Y4B03-G The world's thinnest solenoid interlock switch 15mm wide Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions Energy saving - 24V DC/110 mA Three sides can be manually unlocked LED Indicator ...
	IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VJ44ZM-G IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VJ44ZM-G 4 contacts 1NC & 2NC, 1NO, spring lock 5000N locking force is the smallest in the industry Spring-loaded terminals prevent loose wires Energy saving 200mA solenoid consumption Electromagnetic lock and snaplock models are available Rules...
	IDEC/Izumi Safety Interlock HS5D Micro HS9Z-LH5KLHS5 Plastic Slide Communicator IDEC/Izumi Safety Interlock HS5D Micro HS9Z-LH5KLHS5 Plastic Slide Communicator Plastic Slide Handle Actuator for HS5 Series with Key and Rear Lever Product Category: Door Handle Actuators The company has always been customer-centric, the concept of creating value for customers, and the concept of ...
	IDEC/Izumi HS6B Subminiature HS6B-11B01 Safety Interlock Switch 1NC1NO IDEC/Izumi HS6B Subminiature HS6B-11B01 Safety Interlock Switch 1NC1NO 1NC 1NO Contact, 1m Cable 30x15x78mm enclosure One-piece cables reduce wiring time IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage) Open directly ...
	IDEC/Hequan Safety Interlock HS5L Micro Lock HS5L-VA7Y4M-G Interlock 4 CNT Solenoid Lock 4 Contacts, 1NC 1NO Gate, 1NC 1NO Lock Monitoring Circuit, Electromagnetic Lock Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: EN ISO14119 G ...
	IDEC/Izumi HE1G Handheld Enabling Switch HE1G-21SM-1N 3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. Pressing ON ⇒ OFF is a direct open-circuit action function. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. （IEC60204-1； 9.2.5.8 ...
	IDEC/Izumi Safety Switch HS6E Type Electromagnetic Safety Switch HS6E-N7Y4B01-G IDEC/Izumi Safety Switch HS6E Electromagnetic Safety Switch HS6E-N7Y4B01-G The main features are 75mm×15mm×75mm. The 15mm thick solenoid safety switch is the leading level in the industry. The actuator is installed on both sides of the switch to provide four insertion directions; Diagonally protruding ...
	IDEC/Izumi HS1L Solenoid Safety Switch HS1L-R44KMSRM-R Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
	IDEC/Izumi HS5E-KVD005-2A502 Safety switch with key lock VD circuit, key detachable in all positions, key 502,5m cable Mechanical Specifications: Product Category Safety Interlocks Key removal location for all positions Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length: 5 meters Our customer-centric approach ...
	IDEC/Izumi Safety Interlock HS5L Micro Lock HS5L-VA44LM-G 4 Contacts, 1NC 1NO Door 1NC 1NO Lock Supervisory Circuit, Spring Lock, Rear Unlock Button Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: EN ...
	IDEC/Izumi Safety Interlock HS5L Micro Lock HS5L-VD44LM-G 4 Contacts, 2NC Door, 2NC Lock, Monitoring Circuit, Spring Lock, Rear Unlock Button Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: EN ISO1411 ...
	IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-R44KMSRM-G Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.