IDEC/Izumi HS1L Solenoid Safety Switch HS1L-R44KMSRM-R

Small size: 30mm× 30mm×90mm, by changing the mounting direction of the top, the actuator can be inserted from 8 positions, so as to meet different installation needs. IP67 (IEC60529) protection structure is used for the contact parts. The NC contact has a direct disconnect operation structure. （IEC/EN60947 ...

All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...

The resin-based actuator for HS5 series safety switches can be easily mounted to the hand-held enabling switch with the included two screws. Key features: The resin-based actuator for HS5 series safety switches can be easily ...

The non-contact safety switch with RFID technology improves the safety performance. Built-in safety features make the construction of a safety system independent of the combination with specific modules. Thanks to the RFID method, there is no error even if the door closes slowly. Even when installed on swing doors, sliding ...

The actuator is mounted on the guard, the safety switch is mounted on the mechanical body, and the mechanical locking guard is installed. When the inertial action of the machine stops, the electromagnetic coil excitation is unlocked by an electrical signal from the controller, etc., for greater safety. In the event of a power outage and maintenance, special tools can be used ...

3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. Pressing ON ⇒ OFF is a direct open-circuit action function. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. （IEC60204-1； 9.2.5.8 ...

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

IDEC/Izumi's world's thinnest electromagnetic interlock switch 15mm wide Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions Energy saving - 24V DC/110 mA Three sides can be manually unlocked The LED indicator shows solenoid valve operation Standard 3m cable (can be ...

All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...

The position of the incident light is simple and clear, and the optical axis is easy to confirm the accuracy adjustment function. It is possible to construct efficient and economical safety measures without blind spots. The temporary neutralization feature enables both safety and productivity. The stowage restart function makes the production line smooth and safe after the temporary neutralization stop.

IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS9Z-A12T Right Angle Actuator W Rubber Tape Rubber Right Angle Actuator Product Category Actuators The company has always been customer-centric, the concept of creating value for customers, and winning the market with quality and service.

VD circuit, key removable in all positions, 3m cable Mechanical Specifications: Product Category Safety Interlocks Key removal location for all positions Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length 3 meters Our customer-centric service concept: all-round ...

3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance. Press OFF (position 3) ⇒ release OFF (position 1) to create an ON structure. (IEC60204-1:2005, 10.9, IEC60947-5-8:2007, 7.1.9), built-in 2 ...

VD circuit, key removal at LOCK position, 5m cable Mechanical Specifications: Product Category Safety Interlocks Key Removal Position Removed in the locked position Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length: 5 meters Our customer-centric service concept: ...

Main features: compact body 35x40x127mm 1400N locking force Spring or electromagnetic lock type 2 or 4 contact types Spring-loaded clamp terminals Gold-plated contacts Head removal detection circuitry B10d：2.0E+06 Mechanical Specifications: Catheter opening M20 Catheter size M20 The main contact ...

IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VW7Y4ZM-G 4 Contacts 1NO & 3NC, Electromagnetic Lock 5000N locking force is the smallest in the industry Spring-loaded terminals prevent loose wires Energy saving 200mA solenoid consumption Electromagnetic lock and snaplock models are available Mechanical Gauge ...

The operating head detachment detection function is standard. The key is made of a high-security bullet lock. There are 16 key numbers to choose from. There is a rear unlock button type for emergency evacuation and other purposes, and it can be attached to the rear lock release button unit attached to the aluminum frame. Adopt a small negative ...

Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance. Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation. Reduction of operating force in position 2 ...

IDEC/Izumi HS6B Subminiature HS6B-03B05 Safety Interlock Switch 3NC 3NC Contact, 3m Cable 30x15x78mm enclosure One-piece cables reduce wiring time IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage) Direct door opening action: ...

Compact 3-position enable switch with auxiliary contacts. Ergonomic OFF→ ON → OFF 3-position action for hazard avoidance. Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...