Introduction: Rorobot Finger Module FMA8-V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted.
Features:
Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted.
Fixing method: can be fixed from four directions (optional).
Air intake mode: The air intake joint can be installed from three directions (optional).
External sensor modules can be connected.
Product parameters
Fingertip stroke: 109mm
Negative pressure stroke: 45mm
Positive pressure stroke: 64mm
Module height: 60mm
Finger height: 28mm
Module length: 155.5mm
Finger length: 111mm
Module width: 31mm
Finger width: 24mm
Tare weight: 112g
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to meet or even exceed customer expectations, so that customers are satisfied and recognize us. Honest, professional, affordable, fast, so let you rest assured." Integrity and professional service, affordable price, and continuous improvement" is our service concept.
This article introduces the FMA8-V3 product of Rorobot Finger Module, if you are interested in RouTouch/Rorobot Finger Module, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
SoftTouch/Rorobot Finger Module FM-A7V2 Finger height 28mm
Introduction: Rorobot Finger Module FM-A7V2, Features and Applicable Scenarios: Independent Installation, Can Be Installed with SMP Sliding Mounting Plate, Finger Spacing and Angle Adjustable, Fixing Method: Can Be Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional)
...
|
|
Soft Touch/Rorobot Finger Module B3V3 Module width 25mm
Introduction: Rorobot Finger Module B3V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted.
Features:
Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing and ...
|
|
Rorobot BMC-2015D5[P]/S The maximum load is 20g
Introduction: Rorobot BMC-2015D5/S
Features:
It can be installed in the Straight Inlet Connection Module [CM] series or the Test-Through Inlet Flange Connection Touch Group [FCM] series
Straight-through or side-intake options are available
The fingertips are open in the positive pressure state, and the negative pressure ...
|
|
Rorobot BMC-3G20[HAS]/S
Introduction: Rorobot BMC-3G20[HAS]/S
Features:
The fingertip is open in the positive pressure state, and the vacuum state is clamped, and it is recommended to use it with a soft-touch air driver, and the working air pressure can be adjusted by supporting the fingertip distance G.
Soft-touch materials are divided into regular [H] and non-...
|
|
Rorobot BMC-3B12[H]/S
Introduction: Rorobot BMC-3B12[H]/S
Features:
The fingertips are opened in the positive pressure state and clamped in the vacuum state, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by supporting the fingertip distance D.
Soft-touch materials are divided into conventional type [H] and non-marking ...
|
|
Rorobot BML-3G20[HAS]/S
Introduction: Rorobot BML-3G20[HAS]/S
Features:
The fingertip is open in the positive pressure state, and the vacuum state is clamped, and it is recommended to use it with a soft-touch air driver, and the working air pressure can be adjusted by supporting the fingertip distance G.
Soft-touch materials are divided into regular [H] and non-...
|
|
SoftTouch/Rorobot Finger Module A8V5 Module length 158mm
Introduction: Rorobot Finger Module A8V5, Features and Applicable Scenarios: The module is thinner and lighter, and the minimum finger spacing between the mounting modules is only 10mm, which is suitable for clamping tiny, thin and light workpieces. It can also be used in series (using the screw kit PK), but compared to the V4, each finger needs to be supplied with air independently.
|
|
Soft Touch/Rorobot Finger Module FM-A4V1 Finger width 24mm
Introduction: Rorobot Finger Module FM-A4V1, Features and Applicable Scenarios: Combination of two-finger modules, compact structure, small space occupation. The spacing and installation angle are not adjustable, and it is suitable for clamping small, light and thin workpieces.
Features:
Features and applicable scenarios: ...
|
|
Soft Touch/Rorobot Finger Module B5V3 Finger width 18mm
Introduction: Rorobot Finger Module B5V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted.
Features:
Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing and ...
|
|
Rorobot B-2B accuracy range 0.05mm
Introduction: Rorobot Soft Beak B-2B
Features:
Replaceable flexible chucks
The fingertips are open in the positive pressure state, clamped in the negative pressure state, and the fingertips are adjustable from G
It can be used as a clamp or external support
Recommended for use with soft-touch actuators
Product parameters
...
|
|
Rorobot BMC-3B14[P]/S The recommended load is 12g
Introduction: Rorobot BMC-3B14/S
Features:
The fingertips are open in the positive pressure state, and clamped in the negative pressure state, it is recommended to use it with a soft-touch air driver, and the working air pressure can be adjusted with the distance between the fingertips of the inner support and the fingertips.
The soft claw material is divided into conventional type and non-marking type, when ...
|
|
SoftTouch/Rorobot iPCU2-SMN Passive Driver
Introduction: iPCU2 has two options: standard iPCU2-SMN and high-speed iPCU2-HMN, the high-speed type has a larger vacuum flow rate and is suitable for high-speed handling conditions.
iPCU2 Passive Driver:
Compact soft-touch passive actuator.
-90~300kPa three-speed adjustable output air pressure range ...
|
|
Soft Touch/Rorobot Soft Jaws BMC-4BG64[PAS]/S The recommended load is 1500g
Introduction:Rorobot soft claw BMC-4BG64/S, B-4BG64/S is an external gripper type soft claw, the recommended clamping workpiece size is (28-50) mm, the opening and closing size is (50.4-80) mm, suitable for grabbing steamed cakes, buns, siu mai and jujube cakes and other soft foods, B-4BG64/S is ...
|
|
Rorobot BML-2G1211[HAS] Recommended load is 120g
Introduction:Rorobot Robot BML-2G1211[HAS]
Features:
The fingertips are open in the positive pressure state, and the vacuum state is clamped, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G
The soft claw material is divided into conventional type [H] ...
|
|
Rorobot BML-4H18[HAS]/S The recommended load is 15g
Introduction: Rorobot BML-4H18[HAS]/S
Features:
The fingertips are open in the positive pressure state, clamped in the negative pressure state, and it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by using the external support fingertip distance D.
The soft claw material is divided into conventional type [H and no ...
|
|
Soft Touch/Rorobot Finger Module FM-B7V2 Finger height 21mm
Introduction: Rorobot Finger Module FM-B7V2, Features and Applicable Scenarios: Independent Installation, Can Be Installed with SMP Sliding Mounting Plate, Finger Spacing and Angle Adjustable, Fixing Method: Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional)
...
|
|
The Flex Touch/Rorobot Flange Connection Module FCM-R04 is 95mm long
Introduction: FlexTouch/Rorobot Flange Connection Module FCM-R04
Features:
It conforms to the ISO9409-1:2004 standard (i.e., the national standard GB/T 14468.1-2006/), and is suitable for most robot flanges on the market.
Lightweight for lightweight articulated machines ...
|
|
Rorobot BML-3B14[P]/S
Introduction: Rorobot Soft Jaw BML-3B14/S
Features:
The fingertips are open in the positive pressure state, and clamped in the negative pressure state, it is recommended to use it with a soft-touch air driver, and the working air pressure can be adjusted with the distance between the fingertips of the inner support and the fingertips.
The soft claw material is divided into conventional type and non-marking type, when ...
|
|
Rorobot BML-4B32[HAS]/S The recommended load is 50g
Introduction: Rorobot Robot BML-4B32[HAS]/S
Features:
The fingertips are open in the positive pressure state, and the clamping is in the vacuum state, and it is recommended to use the soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertips G and the outer support fingertips D.
Soft claws ...
|
|
Rorobot FM-A6V3/LS1[P]
Introduction: Rorobot Robot Soft Jaw FM-A6V3/LS1, Soft Finger LS1 has good versatility and wear-resistant. It is suitable for rough workpiece surfaces such as food, metal, and plastic parts. When gripping the workpiece, the damage caused to the workpiece by the soft finger itself can be minimized. We...
|
|