All M3.5 wiring screws are used to improve the connection line.
The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit.
In addition, there is a key interlock type with a standard portable key that can realize hostage control, so you can carry the portable key into large equipment to ensure safety.
The actuator is mounted on the safety gate, the safety switch is installed on the mechanical body, and the gate can be automatically locked mechanically.
When the inertial operation of the machine is stopped, the electromagnetic coil is unlocked by an electronic signal from the controller, etc., for greater safety.
This is a resin safety switch with a locking strength of 3000N∗ by strengthening the locking mechanism and actuator.
The actuator insertion port of the main body has been enlarged to improve the ability to cope with the shaking of the door.
The key interlock type is available with 10 keys to choose from, eliminating the need for key swapping between adjacent devices.
There are two directions in which the actuator is inserted.
Double-insulated structure without grounding wire.
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces IDEC/Izumi HS1E-K type electromagnetic safety switch 3 circuit type HS9Z-A3S products, if you are interested in IDEC/Izumi, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
IDEC/Izumi HS5B Safety Switch HS5B-11ZB
Small size: 30mm× 30mm×90mm, by changing the mounting direction of the top, the actuator can be inserted from 8 positions, so as to meet different installation needs.
IP67 (IEC60529) protection structure is used for the contact parts.
The NC contact has a direct disconnect operation structure. （IEC/EN60947 ...
|
|
IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-R7Y4KMSR-G
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HS5E-KVD003-2A502 Safety switch with key lock
VD circuit, key detachable in all positions, key 502,3m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key removal location for all positions
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length 3 meters
Our customer-centric approach ...
|
|
IDEC/Izumi HE1G Handheld Enabling Switch HE1G-21SMB-1N
3 position action of OFF ⇒ ON ⇒ OFF to avoid danger.
Pressing ON ⇒ OFF is a direct open-circuit action function.
By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state.
（IEC60204-1； 9.2.5.8 ...
|
|
IDEC/Izumi Safety Switch HS1B HS2B Full size
The HS1B is a full-size interlock switch in a more rugged industrial die-cast aluminum housing. Options include red or green LED indicators, as well as two different circuit configurations. The HS2B comes with an optional red or green LED indicator and features the same ...
|
|
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VG7Y4ZM-G
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VG7Y4ZM-G 4 contacts 2NC, 1NO and 1NC, solenoid lock
5000N locking force is the smallest in the industry
Spring-loaded terminals prevent loose wires
Energy saving 200mA solenoid consumption
Electromagnetic lock and snaplock models are available
Machine...
|
|
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VF7Y4ZSM-G
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VF7Y4ZSM-G 4 contacts 3NC and 1NC, solenoid lock, side wires
5000N locking force is the smallest in the industry
Spring-loaded terminals prevent loose wires
Energy saving 200mA solenoid consumption
Electromagnetic lock and snaplock models are available
...
|
|
IDEC/Izumi HS6E Submersible Locking HS6E-N44B05-G Safety Switch Spring Lock
Key features:
The world's thinnest solenoid interlock switch is 15mm wide
Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions
Energy saving - 24V DC/110 mA
Three sides can be manually unlocked
The LED indicator shows solenoid valve operation
Standard 3m cable (can be ...
|
|
IDEC/Izumi HS5B type safety switch HS5B-11BM
Small size: 30mm× 30mm×90mm, by changing the mounting direction of the top, the actuator can be inserted from 8 positions, so as to meet different installation needs.
IP67 (IEC60529) protection structure is used for the contact parts.
The NC contact has a direct disconnect operation structure. （IEC/EN60947 ...
|
|
IDEC/Hequan Safety Interlock HS5L-XD7Y4M-G Interlock 2 CNT Solenoid Lock
2 Contacts, 1NC Gate, 1NC Monitor, Electromagnetic Lock
Compact body: 35x40x127mm
1400N locking strength
Gold-plated contacts for small loads
The head direction can be rotated
8 different actuator entries are allowed
Applicable standard: EN ISO14119
GS- ...
|
|
IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-R44KMSRP-R
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HS1L Solenoid Safety Switch HS1L-DQ7Y4KMSR-G
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HS3A Non-Contact Safety Switch HS9Z-H3F5M05
The non-contact safety switch with RFID technology improves the safety performance.
Built-in safety features make the construction of a safety system independent of the combination with specific modules.
Thanks to the RFID method, there is no error even if the door closes slowly.
Even when installed on swing doors, sliding ...
|
|
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS9Z-A15T HS1T Angle Adjustable Actuator
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS9Z-A15T HS1T Angle Adjustable Actuator
Product Category Actuators
The company has always been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all walks of life ...
|
|
IDEC/Hequan Safety Interlock HS5L Miniature Lock HS5L-VJ44M-G Safety Interlock Spring Lock
Main features: compact body 35x40x127mm
1400N locking force
Spring or electromagnetic lock type
2 or 4 contact types
Spring-loaded clamp terminals
Gold-plated contacts
Head removal detection circuitry
B10d：2.0E+06
Mechanical Specifications:
Catheter opening M20
Catheter size M20
The main contact ...
|
|
IDEC/Izumi HS1C-K type solenoid safety switch HS1C-K244R-G-T006
During mechanical operation, the guards/keys are securely locked.
Remove the key to unlock the safety gate, and keep the load circuit and auxiliary circuit open.
Ideal for applications where the key needs to be taken into a hazardous location to avoid accidental start-up of the device.
Key interlock type ...
|
|
IDEC/Izumi Safety Interlock HS5L Micro Lock HS9Z-DH5RH Door Handle Actuator (Right)
IDEC/Izumi Safety Interlock HS5L Micro Lock HS9Z-DH5RH Door Handle Actuator (Right)
Doorknob Actuator Handle Unit, Right Side Door
Product Category: Door Handle Actuators
The company has always been customer-centric, the concept of creating value for customers, and winning the market with quality and service.
|
|
IDEC/Izumi HE2B Enabling Switch HE2B-M200PN1
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 2 ⇒ 3 requires force and a clear sense of operation.
Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...
|
|
IDEC/Izumi HS5E-KVA0L05-2C502 Safety switch with key lock
VA circuit, key removal at LOCK position, key 502,5m cable, rear unlock button
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the locked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length: 5 meters
We start with ...
|
|
IDEC/Izumi Safety Interlock HS5D Micro HS9Z-LH5KLHS5 Plastic Slide Communicator
IDEC/Izumi Safety Interlock HS5D Micro HS9Z-LH5KLHS5 Plastic Slide Communicator Plastic Slide Handle Actuator for HS5 Series with Key and Rear Lever
Product Category: Door Handle Actuators
The company has always been customer-centric, the concept of creating value for customers, and the concept of ...
|
|
Contact
working hours
