IDEC/Izumi HE5B Enabling Switch HE5B-M2PB

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off. It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...

The non-contact safety switch with RFID technology improves the safety performance. Built-in safety features make the construction of a safety system independent of the combination with specific modules. Thanks to the RFID method, there is no error even if the door closes slowly. Even when installed on swing doors, sliding ...

Equipped with a detection function for the operation head to fall off, providing greater safety! Key features: It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off. Same size as HS5B (external dimensions, mounting dimensions), with dual ...

The operating head detachment detection function is standard. The key is made of a high-security bullet lock. There are 16 key numbers to choose from. There is a rear unlock button type for emergency evacuation and other purposes, and it can be attached to the rear lock release button unit attached to the aluminum frame. Adopt a small negative ...

All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...

IDEC/Izumi HS6B Subminiature HS6B-12B03 Safety Interlock Switch 2NC1NO 2NC 1NO Contact, 3m Cable 30x15x78mm enclosure One-piece cables reduce wiring time IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage) Open directly ...

Small size (external dimensions: 7mm× 16mm×51mm). Simple alignment during installation. Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type). IP67 protection structure. Environmental Specifications Degree of protection IP66 Our customer-centric approach ...

All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...

VA circuit, pull out the key in the UNLOCK position, key 502, 3m cable, rear unlock button Mechanical Specifications: Product Category Safety Interlocks Key Removal Position Removed in the unlocked position Environmental indicators Degree of protection IP65 Cable length 3 meters Our customer-centric approach ...

Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance. Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation. Reduction of operating force in position 2 ...

Lightweight design with excellent grip. The ergonomic grip design provides comfortable operation with its compact and comfortable grip shape. Lightweight (approx. 140g for HE2G-21SH type) and compact size, it can be easily held even by users with small palms.

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-DD44ZLSM-G 4 contacts 1NC+1NC and 1NC+1NC, spring lock, rear unlock button, side conduit 5000N locking force is the smallest in the industry Spring-loaded terminals prevent loose wires Energy saving 200mA solenoid consumption Raise...

IDEC/Izumi HS6E Submersible Locking HS6E-N7Y4B03-G Safety Switch Solenoid LockThe World's Thinnest Solenoid Interlock Switch 15mm wide Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions Energy saving - 24V DC/110 mA Three sides can be manually solved ...

Ergonomic, 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance. Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation. Reduction of operating force in position 2 ...

IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VW7Y4ZM-G 4 Contacts 1NO & 3NC, Electromagnetic Lock 5000N locking force is the smallest in the industry Spring-loaded terminals prevent loose wires Energy saving 200mA solenoid consumption Electromagnetic lock and snaplock models are available Mechanical Gauge ...

VD circuit, unplug the key at the LOCK position, key 501, 3m cable Mechanical Specifications: Product Category Safety Interlocks Key Removal Position Removed in the locked position Environmental indicators Degree of protection IP65 Installation and installation specifications Cable length 3 meters Our customer-centric ...

Small size: 30mm× 30mm×90mm, by changing the mounting direction of the top, the actuator can be inserted from 8 positions, so as to meet different installation needs. IP67 (IEC60529) protection structure is used for the contact parts. The NC contact has a direct disconnect operation structure. （IEC/EN60947 ...

All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...