|
IDEC/Izumi HS6E Submersible Locking HS6E-N44B05-G Safety Switch Spring Lock
Key features:
The world's thinnest solenoid interlock switch is 15mm wide
Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions
Energy saving - 24V DC/110 mA
Three sides can be manually unlocked
The LED indicator shows solenoid valve operation
Standard 3m cable (can be ...
|
|
IDEC/Izumi HS3A Non-Contact Safety Switch HS9Z-ZH31
The non-contact safety switch with RFID technology improves the safety performance.
Built-in safety features make the construction of a safety system independent of the combination with specific modules.
Thanks to the RFID method, there is no error even if the door closes slowly.
Even when installed on swing doors, sliding ...
|
|
IDEC/Izumi HE1G-L Handheld Enabling Switch HE1G-L21SMB
3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance.
Press OFF (position 3) ⇒ release OFF (position 1) to create an ON structure. (IEC60204-1:2005, 10.9, IEC60947-5-8:2007, 7.1.9), built-in 2 ...
|
|
IDEC/Izumi HS1L Electromagnetic Safety Switch HS1L-DT7Y4KMSRP-G
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HS6B Safety Switch HS9Z-A65
IDEC/Izumi HS6B type safety switch HS9Z-A65 main features: 30mm×15mm×78mm small safety switch.
3 contacts of dual contact + auxiliary contact for applications with high safety requirements. (ISO13849-1, EN954-1)
Available from 2 actuators on request ...
|
|
IDEC/Izumi HS5E-KVA0L03-2B502 Safety switch with key lock
VA circuit, pull out the key in the UNLOCK position, key 502, 3m cable, rear unlock button
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the unlocked position
Environmental indicators
Degree of protection IP65
Cable length 3 meters
Our customer-centric approach ...
|
|
IDEC/Izumi HS1C Electromagnetic Safety Switch HS1C-L244R-G
The actuator is mounted on the guard, the safety switch is mounted on the mechanical body, and the mechanical locking guard is installed.
When the inertial action of the machine stops, the electromagnetic coil excitation is unlocked by an electrical signal from the controller, etc., for greater safety.
In the event of a power outage and maintenance, special tools can be used ...
|
|
IDEC/Izumi HS5D Safety Switch HS5D-03RNP
It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.
It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...
|
|
IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-R7Y4KMSR-R
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HS1E-K Type Solenoid Safety Switch 3 Circuit Type HS9Z-A1
All M3.5 wiring screws are used to improve the connection line.
The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit.
There is also a key with a portable key as standard for hostage control ...
|
|
IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-DT44KMSR-R
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VG44ZSM-G
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VG44ZSM-G 4 contacts 2NC, 1NO and 1NC, spring lock, side wires
5000N locking force is the smallest in the industry
Spring-loaded terminals prevent loose wires
Energy saving 200mA solenoid consumption
Electromagnetic locks and snap locks are available ...
|
|
IDEC/Izumi HS5 series slip-in door handle type actuator
Impact-resistant metal slip-on doorknob-type actuators ensure a safe working environment.
Key features:
It has a metal frame with high impact resistance.
A 2-step operation to prevent malfunction.
The rear lever unlocks from inside the safety barrier to ensure that in the event of a hazard ...
|
|
IDEC/Izumi HE1G Handheld Enabling Switch HE1G-21SMB-1N
3 position action of OFF ⇒ ON ⇒ OFF to avoid danger.
Pressing ON ⇒ OFF is a direct open-circuit action function.
By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state.
(IEC60204-1; 9.2.5.8 ...
|
|
DEC/Izumi Safety Interlock HS5L Micro Lock
Most safety interlocks on the market typically have up to 6 contacts, which exceeds the requirements of many applications. The revised EN ISO 14119 standard requires two interlocking devices to achieve PLe when using Class 2 interlocked devices. For one of the two interlocks, the 2 contacts ...
|
|
IDEC/Izumi Safety Interlock HS5L Micro Lock HS5L-VA44LM-G
4 Contacts, 1NC 1NO Door 1NC 1NO Lock Supervisory Circuit, Spring Lock, Rear Unlock Button
Compact body: 35x40x127mm
1400N locking strength
Gold-plated contacts for small loads
The head direction can be rotated
8 different actuator entries are allowed
Applicable standard: EN ...
|
|
IDEC/Izumi HS6B Subminiature HS6B-03B01 Safety Interlock Switch 3NC
IDEC/Izumi HS6B Subminiature HS6B-03B01 Safety Interlock Switch 3NC 3NC Contact, 1m Cable
30x15x78mm enclosure
One-piece cables reduce wiring time
IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage)
Direct door opening action ...
|
|
IDEC/Izumi Safety Interlock HS5E-K Micro Lock Safety switch with key lock HS5E-KVA003-2A501
VA circuit, key detachable in all positions, key 501,3m
Cable Product Category Safety Interlocks
Key removal location for all positions
Degree of protection IP65
Cable length 3 meters
The company has always been customer-centric, the concept of creating value for customers, and winning with quality and service.
|
|
IDEC/Izumi Safety Interlock HS5L Micro Lock HS5L-VB44LM-G
4 Contacts, 1NC 1NO Door, 2NC Lock, Supervisory Circuit, Spring Lock, Rear Unlock Button
Compact body: 35x40x127mm
1400N locking strength
Gold-plated contacts for small loads
The head direction can be rotated
8 different actuator entries are allowed
Applicable standard: EN IS ...
|
|
IDEC/Izumi HS7A-DMC non-contact safety switch HS7A-DMC5905
Small size (external dimensions: 7mm× 16mm×51mm).
Simple alignment during installation.
Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type).
IP67 protection structure.
Mechanical Specifications:
Contact structure 1NC+1NO
Environmental Specifications
Protection class I ...
|