The position of the incident light is simple and clear, and the optical axis is easy to confirm the accuracy adjustment function.
It is possible to construct efficient and economical safety measures without blind spots.
The temporary neutralization feature enables both safety and productivity.
The stowage restart function enables a smooth and safe restart of the production line after a temporary neutralization stop.
It is not affected by the detection width, and achieves a high-speed response of less than 14 ms.
Can be connected in series (up to 3 units or 192 optical axes).
One unit is compatible with PNP transistor output and NPN transistor output.
Safety circuits can be constructed without the need for safety relay modules.
Various blanking functions make it easy to construct a safety system and easy to operate.
It is equipped with a digital fault indicator that shows the fault content at a glance as standard.
Protection class IP65/67 (IEC 60529).
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces IDEC/Izumi SE4D Safety Light Curtain SE9Z-CCB3-MU products, if you are interested in IDEC/Izumi, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
IDEC/Izumi HS1C Solenoid Safety Switch HS1C-L344R-G
The actuator is mounted on the guard, the safety switch is mounted on the mechanical body, and the mechanical locking guard is installed.
When the inertial action of the machine stops, the electromagnetic coil excitation is unlocked by an electrical signal from the controller, etc., for greater safety.
In the event of a power outage and maintenance, special tools can be used ...
|
|
IDEC/Izumi HE6B Enabling Switch HE6B-M200B
Compact 3-position enable switch with auxiliary contacts.
Ergonomic OFF→ ON → OFF 3-position action for hazard avoidance.
Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed.
IEC60204-1（2005） ...
|
|
IDEC/Izumi HS6B Subminiature HS6B-02B01 Safety Interlock Switch 2NC
IDEC/Izumi HS6B Subminiature HS6B-02B01 Safety Interlock Switch 2NC Contact, 1m Cable
30x15x78mm enclosure
One-piece cables reduce wiring time
IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage)
Direct door opening action: even if ...
|
|
IDEC/Izumi HS5E-KVD005-2A501 Safety switch with key lock
VD circuit, key detachable in all positions, Key 501, 5m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key removal location for all positions
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length: 5 meters
Our customer-centric approach ...
|
|
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VA7Y4ZSM-G
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VA7Y4ZSM-G 4 contacts 1NC, 1NO & 1NC, 1NO, solenoid lock, side conduit
5000N locking force is the smallest in the industry
Spring-loaded terminals prevent loose wires
Energy saving 200mA solenoid consumption
Electromagnetic locks and ...
|
|
IDEC/Izumi HE3B Enabling Switch HE3B-M2PB
Ergonomic, 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance.
Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation.
Reduction of operating force in position 2 ...
|
|
IDEC/Izumi HE5B enabling switch HE9Z-D5N1
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation.
Reduction of operating force in position 2 ...
|
|
DEC/Izumi Safety Interlock HS5L Micro Lock
Most safety interlocks on the market typically have up to 6 contacts, which exceeds the requirements of many applications. The revised EN ISO 14119 standard requires two interlocking devices to achieve PLe when using Class 2 interlocked devices. For one of the two interlocks, the 2 contacts ...
|
|
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VG7Y4ZSM-G
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VG7Y4ZSM-G 4 contacts 2NC, 1NO and 1NC, solenoid lock, side wires
5000N locking force is the smallest in the industry
Spring-loaded terminals prevent loose wires
Energy saving 200mA solenoid consumption
Electromagnetic locks and snap locks are available ...
|
|
IDEC/Izumi HS6E Submersible Locking HS6E-M44B03-G Safety Switch Spring Lock
The world's thinnest solenoid interlock switch is 15mm wide
Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions
Energy saving - 24V DC/110 mA
Three sides can be manually unlocked
The LED indicator shows solenoid valve operation
Standard 3m cable (available on request)
|
|
IDEC/Izumi HS3A Non-contact Safety Switch HS3A-H21U4
The non-contact safety switch with RFID technology improves the safety performance.
Built-in safety features make the construction of a safety system independent of the combination with specific modules.
Thanks to the RFID method, there is no error even if the door closes slowly.
Even when installed on swing doors, sliding ...
|
|
IDEC/Izumi HE5B Enabling Switch HE9Z-GSH51
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation.
Reduction of operating force in position 2 ...
|
|
IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP5005
By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored.
Ideal for installation on protective doors where positioning is difficult.
With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.
|
|
IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-DT7Y4KMSRM-G
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HS5E-K Series Key Locking Safety Switch HS5E-KVD0L05-2A
The operating head detachment detection function is standard.
The key is made of a high-security bullet lock. There are 16 key numbers to choose from.
There is a rear unlock button type for emergency evacuation and other purposes, and it can be attached to the rear lock release button unit attached to the aluminum frame.
Adopt a small negative ...
|
|
IDEC/Izumi HE3B enabling switch HE9Z-D3B
Ergonomic, 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance.
Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation.
Reduction of operating force in position 2 ...
|
|
IDEC/Izumi HS6B Subminiature HS6B-02B03 Safety Interlock Switch 2NC
IDEC/Izumi HS6B Subminiature HS6B-02B03 Safety Interlock Switch 2NC Contact, 3m Cable
30x15x78mm enclosure
One-piece cables reduce wiring time
IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage)
Direct door opening action: even if ...
|
|
IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-R7Y4KMSR-G
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HS1C Electromagnetic Safety Switch HS1C-K244R-G-T001
The actuator is mounted on the guard, the safety switch is mounted on the mechanical body, and the mechanical locking guard is installed.
When the inertial action of the machine stops, the electromagnetic coil excitation is unlocked by an electrical signal from the controller, etc., for greater safety.
In the event of a power outage and maintenance, special tools can be used ...
|
|
IDEC/Izumi HE1G-L Handheld Enabling Switch HE1G-L21SM
3 position action of OFF ⇒ ON ⇒ OFF to avoid danger.
By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state.
(IEC60204-1:2005, 10.9 terms, IEC60947-5-8:2007, 7.1.9 terms),
|
|
Contact
working hours
