CHINT /CHINT NP9 button

CJ20 series AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz (or 60Hz), rated working voltage to 660V, rated working current to 630A, for long-distance switching and breaking circuits, and can be combined with appropriate thermal overload relays.

HY23 series instead of HZ3 series combination switch is suitable for AC 50Hz or 60Hz, voltage 380V circuit, as a power supply introduction switch, or as a three-phase squirrel cage induction motor with a control operation frequency of no more than 300 times per hour. Rated voltage: 380 Rated current: 30 Control Electricity ...

NBHLE-40Y residual current action circuit breaker is suitable for AC 50Hz, rated voltage 240V, rated current to 40A in the line, play the role of overload, short circuit and leakage protection, can also be used as the line under normal conditions for infrequent on/off use. The product conforms to IEC61009-1, GB/T 1691 ...

The NP3 series pushbutton is suitable for circuit control systems with AC 50Hz or 60Hz, voltage up to 380V, DC working voltage up to 220V. It is suitable for remote control of equipment in the open air, rain, snow and dust, such as cranes, electric hoists and other equipment. Standard: GB/T 14048. ...

The TB series is suitable for connecting wires in circuits with AC 50Hz or 60Hz, rated voltage up to 600V and rated current up to 100A. This series of products is connected by screw crimping, and the wire end needs to be crimped before it can be connected to the terminal block. Screw mounting. Comply with the standard ...

YBLX-WL travel switch is mainly used in the control circuit of AC 50Hz or 60Hz, voltage 380V, DC voltage 220V, for the travel control of the moving mechanism, the transformation of the direction or speed of the movement, the automatic control of the machine tool, the limit action of the moving mechanism and the control of the stroke or program. Accord with...

YBLX-HL travel switch is mainly used in the control circuit of AC 50Hz or 60Hz, voltage 380V, DC voltage 220V, for the travel control of the moving mechanism, the transformation of the direction or speed of the movement, the automatic control of the machine tool, the limit action of the moving mechanism and the control of the stroke or program. Comply with the standard ...

32-bit high-performance CPU, compiled execution mode, scan cycle is 10 times faster than analytical type, and the basic instruction single-step running time is 0.05μs. Weight: 102 Power consumption: 1.5 Power supply: DC24V±20% Digital inputs: 6 Output Type: Relay Maximum Inductive Load: 80V...

CJ19 series switching capacitor contactor (hereinafter referred to as contactor) is mainly used in power lines with AC 50Hz (or 60Hz) and rated working voltage to 690V, which is used for low-voltage reactive power compensation equipment to put in or remove low-voltage shunt capacitors. Contactors with inhibition ...

CJ19 series switching capacitor contactor (hereinafter referred to as contactor) is mainly used in power lines with AC 50Hz (or 60Hz) and rated working voltage to 690V, which is used for low-voltage reactive power compensation equipment to put in or remove low-voltage shunt capacitors. Contactors with inhibition ...

32-bit high-performance CPU, compiled execution mode, scan cycle is 10 times faster than analytical type, and the basic instruction single-step running time is 0.05μs. Weight: 102 Power consumption: 1.5 Power supply: DC24V±20% Digital inputs: 8 This article introduces the CHINT/CHINT NSC1 series motion controller.

NB1L-63 residual current action circuit breaker is suitable for AC 50Hz, rated voltage single pole two wires, two poles 230V, three poles, three poles four wires, four poles 400V, rated current to 63A in the line, when the person is electrocuted or the leakage current of the power grid exceeds the specified value, the residual current action circuit breaker can be used in the pole ...

32-bit high-performance CPU, compiled execution mode, scan cycle is 10 times faster than analytical type, and the basic instruction single-step running time is 0.05μs. Weight: 102 Power consumption: 2 Output Type: Transistor/Drain Output voltage: 6-30VDC **Large inductive load: 80VA This article introduces the ...

DZ20 series plastic shell circuit breaker (hereinafter referred to as circuit breaker), its rated insulation voltage is 660V, AC 50Hz, rated working voltage 380V and below, and its rated current is from 32A to 1250A. Generally used for power distribution, the rated current of type C is 160A and below, and the shell of type 630 and below ...

32-bit high-performance CPU, compiled execution mode, scan cycle is 10 times faster than analytical type, and the basic instruction single-step running time is 0.05μs. Weight: 102 Power consumption: 2 Digital inputs: 16 Degree of protection: IP30 This article introduces CHINT/CHINT NSC1 series motion controller NSC1- ...

NBH-125 plastic shell circuit breaker is suitable for AC 50Hz, rated voltage 230V/400V, rated current to 125A in the line, for overload and short circuit protection, under normal circumstances, as the line of infrequent operation and conversion, can also be used as a disconnection of the line for line and equipment maintenance...

CHINT/CHINT NXBLE-63 residual current operated circuit breaker Rated current (In): 6A, 10A, 16A, 20A, 25A, 32A, 40A, 50A, 63A; Rated residual operating current (I△n): 0.01A (1P+N, 2P), 0.03A, 0.05A, 0.075A, 0.1A, 0.3A (AC type); 0.03 ...

HZ10 series combination switch is mainly suitable for AC 50Hz or 60Hz, voltage 380V and below, DC voltage 220V and below the circuit, for manual infrequent connection or breaking of circuits, switching power supply or load, measuring circuits, can also control small capacity motors. Standards: G ...

The new NXC series AC contactor has a novel appearance and compact structure. It is mainly used to start and control AC motors frequently, turn on and break circuits at long distances, and can form electromagnetic starters with appropriate thermal overload relays. Standards: GB/T 14048.1/IEC 60947-1, ...

YBLX-ME series travel switch is suitable for AC 50Hz or 60Hz, voltage 380V, DC voltage 220V control circuit, for the travel control of the moving mechanism, the change of the direction or speed of the movement, the automatic control of the machine tool, the limit action of the moving mechanism and the control of the stroke or program. Symbol...