CHINT/CHINT DZ15 Series Plastic Case Circuit Breaker DZ15-100

OVT-1 overvoltage tripper is mainly used for overvoltage protection in lines with AC 50Hz (60Hz) and rated working voltage of 230V. Ambient temperature: -25°C - +60°C Relative humidity: ≤95% Pollution level: Level 3 Altitude:...

ND16 series signal light is suitable for indication signals, warning signals, accident signals and other indication signals in telecommunications, electrical and other lines with an AC 50Hz (or 60Hz), rated voltage of 400V and below or DC working voltage of 400V and below. Conform to the standard: GB/T 14048.5. Root...

JXB series terminal blocks are used for connecting wires in power and control circuits with AC 50Hz or 60Hz, rated voltage to 800V, and rated cross-sectional area of 2.5-70mm2. It is installed on TH35 rails. Comply with standards: GB/T 14048.7, IEC 60947-7-1. This article describes ...

Product Overview It is suitable for terminal circuits with AC 50HZ and load current not exceeding 100A, and the normal operating temperature is -25°C to +60°C. Technical Parameter Item: Parameter value Compliant with standard: GB/T 17466.1 GB/T 17466.24 Installation: Concealed/surface-mounted Number of digits: ...

Introduction: CHINT/CHINT miniature circuit breaker NXB-125G is a new type of leakage circuit breaker integrating leakage relay, leakage circuit breaker, AC contactor, undervoltage and other functions. It can automatically distinguish between slowly variable leakage and abrupt leakage (electric shock) for protection Product parameters ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

SHT-B5 shunt tripper (hereinafter referred to as tripper) is mainly used for matching with NB5 series circuit breakers, and is suitable for long-distance shunt tripping operation in lines with AC 50Hz and rated voltage to 415V; AX-B5 auxiliary contact is mainly used for AC 50Hz, rated heating current to 6A, rated ...

NXMF series circuit breakers are suitable for AC 50/60Hz, rated working voltage to 690V, rated working current from 10A to 630A in the distribution network circuit, used to distribute power and protect lines and power equipment from overload, short circuit, undervoltage and other faults. At the same time, it can also be used as an electric motor ...

JCUK series is suitable for wire connection in circuits with AC 50Hz or 60Hz, rated voltage to 1000V and rated cross-sectional area to 150mm2. It is installed on TH35 rails. Comply with standards: GB/T 14048.7, IEC 60947-7-1. This article introduces the CHINT/CHINT Terminal Blocks - ...

CHINT Xinrui NB5 series terminal power distribution products are suitable for power line facilities and electrical equipment in commercial buildings, residential buildings, industrial equipment and similar places with AC 50Hz, rated voltage of 230V/400V and rated current up to 125A.

Introduction: NVF3 inverter is a high-performance vector control inverter independently developed by our company, which adopts advanced control strategy to achieve high-precision magnetic flux vector torque control, with high control accuracy, wide speed range, large starting torque, high reliability, strong overload capacity, flexible operation...

NB1L-40 □ residual current action circuit breaker is suitable for AC 50Hz, rated voltage single pole two wires, two poles 230V, three poles, three poles four wires, four poles 400V, rated current to 40A line, when the person is electrocuted or the leakage current of the power grid exceeds the specified value, the residual current action circuit breaker can be used in the pole ...

CHINT Xinrui NB5LE series terminal power distribution products are suitable for AC 50Hz, rated voltage 230V/400V, rated current to 125A in commercial buildings, residential buildings, industrial equipment and similar places of power line facilities and electrical equipment, with overload protection, short circuit protection, residual ...

Based on the Linux system, the system is stable, efficient and reliable. Industrial-grade high-performance Cortex A8 processor with a clock speed of 600MHz. The COM port integrates RS232/422/485 communication mode. The product provides USB master station and USB slave port, USB slave download port supports 10M/s transmission speed, ...

ND9 signal light is suitable for AC 50Hz/60Hz, rated voltage up to 230V, DC voltage up to 230V circuit control system. It is used as an indication signal, preset signal, accident signal and other indication of telecommunications, electrical and other lines. Standards: GB/T 14048.5, IEC 60947-5-1 ...

NB2LE residual current action circuit breaker is suitable for residual current protection, overload and short circuit protection in lines with AC 50/60Hz, rated voltage of 230V and rated current up to 40A. When the person is electrocuted or the leakage current of the circuit exceeds the specified value, the residual current action circuit breaker can be used in a very short ...

Introduction: NVF5 series simple vector inverter, using no speed sensor vector control technology, has the characteristics of small and lightweight, fast operation and excellent performance. 　　Product parameters input Voltage range: single-phase 230V (±15%) three-phase 380V (-15%) - 4 ...

NBHLE-32 residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230V/400V, rated current to 32A in the line, play the role of overload, short circuit and leakage protection, can also be used as infrequent on-off of the line under normal circumstances. The product conforms to IEC61009-1, GB/T...

CJ19 series switching capacitor contactor (hereinafter referred to as contactor) is mainly used in power lines with AC 50Hz (or 60Hz) and rated working voltage to 690V, which is used for low-voltage reactive power compensation equipment to put in or remove low-voltage shunt capacitors. Contactors with inhibition ...