CHINT/CHINT NHM5 disconnector

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

YBLX-HL travel switch is mainly used in the control circuit of AC 50Hz or 60Hz, voltage 380V, DC voltage 220V, for the travel control of the moving mechanism, the transformation of the direction or speed of the movement, the automatic control of the machine tool, the limit action of the moving mechanism and the control of the stroke or program. Comply with the standard ...

Introduction: NXZ series automatic transfer switch electrical appliances are suitable for AC 50Hz, rated voltage 400V/415V and below, rated current to 630A three-phase four-wire dual-circuit power supply grid, automatically connect one or several load circuits from one power supply to another, in order to ensure the normal supply of load circuits.

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

NKB1 series control and protection switchgear (CPS) (hereinafter referred to as "switch") is mainly used in AC 50Hz (60Hz), rated working voltage to 690V, rated working current 1A to 125A, controller setting current 0.4A to 125A, control motor power 0.12kW to 55kW ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

NBH-63H miniature circuit breaker is suitable for AC 50Hz, rated voltage 230V/400V, rated current to 63A in the line, for overload and short circuit protection, under normal circumstances, as the line of infrequent operation and conversion, can also be used as a disconnection of the line for line and equipment maintenance of the isolation open...

The NP3 series pushbutton is suitable for circuit control systems with AC 50Hz or 60Hz, voltage up to 380V, DC working voltage up to 220V. It is suitable for remote control of equipment in the open air, rain, snow and dust, such as cranes, electric hoists and other equipment. Standard: GB/T 14048. ...

Introduction: CHINT/CHINT miniature circuit breaker NXB-125G is a new type of leakage circuit breaker integrating leakage relay, leakage circuit breaker, AC contactor, undervoltage and other functions. It can automatically distinguish between slowly variable leakage and abrupt leakage (electric shock) for protection Product parameters ...

Introduction: CJX1-K series AC vacuum contactor (hereinafter referred to as contactor), mainly used for AC 50Hz-60Hz, rated insulation voltage of 1000V, rated working voltage of 380V under the AC-3 use category of rated working current to 820A in the circuit, for long-distance connection and disconnection ...

HY2 series reverse switch (hereinafter referred to as switch) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 380V, rated working current to 20A motor circuit, used as a direct switch on and off a single squirrel cage induction motor, so that it rotates, reverses and stops. Compliant with standards ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

NU5-I.+II. surge protective devices comply with GB/T 18802.11. It is suitable for AC 50Hz, rated voltage of single-phase 230V/ three-phase 400V power distribution and control system, meets SPD level I and II tests, and is used to suppress transient overvoltage lower than the equipment impulse resistance overvoltage, venting ...

Introduction: NZ7 series automatic transfer switch electrical appliances are suitable for AC power frequency 50Hz, rated working voltage AC400V, rated working current to 800A in the three-phase four-wire dual-circuit power supply network, automatically connect one or several load circuits from one power supply to another, in order to ensure that the load circuit is positive...

NA1H series universal circuit breaker is a technology-leading product, which can fully meet the intelligent power needs of customers and make the electricity of owners and residents more safe and reliable. NA1H series universal circuit breaker (hereinafter referred to as circuit breaker) is suitable for AC 50Hz, rated working voltage to AC690V, ...

The NC5 series AC contactors are primarily used at AC 50Hz (or 60Hz) and are rated for operating voltage up to 690V at AC-3/400(380)V Circuits rated up to 630A in the use category for long-distance switching on and off circuits, and with appropriate thermal overload relays...

The S9 shunt trip device (hereinafter referred to as the tripper) is mainly used for matching with NB1 or NBH8 series circuit breakers, and is suitable for long-distance shunt tripping operation in lines with AC 50Hz (or 60Hz) rated voltage to 400V. Meets the standard: IEC60947-5-1, obtained CE certification. 3.1 Basic ...

Introduction: HP-UPS series online uninterruptible power supply is a high-frequency single-in, single-output online UPS model. Each capacity model is available in both standard and long-life models, with a wide range of applications, making it ideal for small space environments such as offices and computer rooms. It can be used for small data centers, storage, network ...

32-bit high-performance CPU, compiled execution mode, scan cycle is 10 times faster than analytical type, and the basic instruction single-step running time is 0.05μs. Weight: 102 Power consumption: 2 Digital inputs: 16 Degree of protection: IP30 This article introduces CHINT/CHINT NSC1 series motion controller NSC1- ...

NPM8 series push buttons are suitable for industrial control, instrumentation, and household appliances with AC 50Hz (60Hz), rated working voltage AC220V and below, or DC working voltage DC110V and below. It is used for the control of electrical circuits of contactors, relays and other signals, with an indication ...